Sketcher Recortar arista

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Sketcher Trimming and the translation is 17% complete.

Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎hrvatski • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska
Arrow-left.svg Previous: Sketcher CreateFillet.png Fillet
Next: Extend Sketcher Extend.svg Arrow-right.svg

Sketcher Trimming.png Sketcher Recortar arista

Ubicación en el Menú
Sketch → Geometrías de croquis → Recortar arista
Entornos de trabajo
Sketcher
Atajo de teclado por defecto
None
Introducido en versión
0.12
Ver también
Sketcher Extender borde


Description

This tool trims an edge to the nearest overlapping edge.

SketcherTrimExample1.png SketcherTrimExample2.png SketcherTrimExample3.png

Usage

  1. Press the Sketcher Trimming.png trim edge button. The mouse pointer turns into a white cross with a red trim symbol.
  2. Click on the edge that you want to trim.
  3. The line segment will be trimmed to the nearest overlapping line(s). If there are other sketch elements on both sides of the clicked position, the clicked piece is cut out.
  4. Pressing ESC or pressing the right mouse button will terminate the function.

Limitations

  • Arcs of hyperbola, arcs of parabola and B-splines cannot be trimmed at this time.


Arrow-left.svg Previous: Sketcher CreateFillet.png Fillet
Next: Extend Sketcher Extend.svg Arrow-right.svg