Sketcher SelectElementsWithDoFs/ru

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Sketcher SelectElementsWithDoFs and the translation is 20% complete.

Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎português • ‎română • ‎русский

Sketcher SelectElementsWithDoFs.svg Sketcher Select solver DoFs

Расположение в меню
Sketch → Инструменты для эскиза → Select solver DoFs
Верстаки
Sketcher
Быстрые клавиши
отсутствуют
Представлено в версии
0.18
См. также
...


Описание

This tool is meant to aid in fully constraining a sketch by highlighting in green the sketch elements with remaining degrees of freedom (DoF).

How to use

  1. In the Solver messages box located at the top of the Tasks tab, the following message should be displayed:
    Under-constrained sketch with X degrees of freedom
    where "X" is the number of degrees of freedom remaining in the sketch; click on the blue link, or use the menu.
  2. The elements which have degrees of freedom are highlighted in green.
  3. Click anywhere in the sketch to clear the highlight color.