Sketcher NewSketch

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Sketcher NewSketch and the translation is 19% complete.

Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎hrvatski • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska • ‎Türkçe • ‎中文(中国大陆)‎

Sketcher NewSketch.svg Criar um esboço

Veja também
Sketch → Criar um esboço
Bancadas de trabalho
Sketcher
Atalho padrão
None
Veja também
Mapear um esboço para uma face, Reorientar um esboço...


Description

This will create a new sketch.

Note that the PartDesign workbench has its own new sketch command, when using PartDesign it is preferable to use its own dedicated tool.

How to use

Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the

  • XY-Plane
  • XZ-Plane
  • YZ-Plane

You can change an offset to any of the three planes and the side of the offset.

Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.

Note

The sketch can be re-mapped to another already existing face using the Map Sketch - Command.

The sketch can be moved in the 3D-Space using Placement.