Sketcher NewSketch

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Sketcher NewSketch and the translation is 38% complete.

Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎hrvatski • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska • ‎Türkçe • ‎中文(中国大陆)‎

Sketcher NewSketch.svg Crear croquis

Ubicación en el Menú
Sketch → Crear croquis
Entornos de trabajo
Sketcher
Atajo de teclado por defecto
None
Introducido en versión
-
Ver también
Trazar croquis en cara..., Reorientar croquis...


Descripción

This will create a new sketch.

Note that the PartDesign workbench has its own new sketch command, when using PartDesign it is preferable to use its own dedicated tool.

Utilización

Clicking on the icon without a face (pre-)selected will pop up a dialog asking if the sketch should be drawn on the

  • XY-Plane
  • XZ-Plane
  • YZ-Plane

You can change an offset to any of the three planes and the side of the offset.

Clicking on the icon with a (pre-selected) face will cause the sketch to be mapped to the selected face.

Notas

The sketch can be re-mapped to another already existing face using the Map Sketch - Command.

The sketch can be moved in the 3D-Space using Placement.