Sketcher Extend/ro

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Sketcher Extend and the translation is 8% complete.

Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎română • ‎русский
Arrow-left.svg Previous: Sketcher Trimming.png Trimming
Next: External Sketcher External.png Arrow-right.svg

Sketcher Extend.svg Sketcher: Prelungirea muchiei

poziția meniului
Sketch → Geometria schitei → Prelungirea muchiei
Workbenches
Sketcher
scurtătură
nici unul
Prezentat în versiune
0.17
A se vedea, de asemenea,
Sketcher Taie marginea


Description

The extend edge tool extends an edge to an arbitrary location in the sketch, or to another edge.

Sketcher Extend example 01.png

Shown on the left (1), the two sketch elements before the operation; in the middle (2), the line is being extended to the arc; to the right (3), the final result.

How to use

  1. Press the Sketcher Extend.svg Extend edge button.
  2. Select a line or an arc.
  3. In the 3D view, move the mouse pointer toward the direction to extend.
  4. Click on an arbitrary location in space, or
  5. To extend to another edge, place the mouse pointer over the edge; when it is highlighted and the Sketcher ConstrainPointOnObject.png point on object constraint icon appears besides the mouse pointer, click to confirm. A point on object constraint will be added.
  6. To extend to a point in the sketch, place the mouse pointer over the point; when it is highlighted and the Sketcher ConstrainCoincident.png coincident constraint icon appears besides the mouse pointer, click to confirm. A coincident constraint will be added.

Limitations

  • Only arcs and lines can be extended at this time.
Arrow-left.svg Previous: Sketcher Trimming.png Trimming
Next: External Sketcher External.png Arrow-right.svg