Sketcher CreateArcOfParabola

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Sketcher CreateArcOfParabola and the translation is 20% complete.

Other languages:
English • ‎español • ‎français • ‎italiano • ‎română • ‎русский

Sketcher Parabolic Arc.png Sketcher Arc of parabola

Ubicación en el Menú
Sketch → Sketcher geometries → Create an arc of parabola
Entornos de trabajo
Sketcher
Atajo de teclado por defecto
None
Introducido en versión
0.17
Ver también
Sketcher Arc of Ellipse, Sketcher Arc of hyperbola


Description

This tool creates an arc of parabola by focus, vertex and endpoints.

Sketcher Arc of Parabola 01.png

How to use

  1. Press the Sketcher Parabolic Arc.png Create an arc of parabola button.
  2. Click in the 3D view to define the focus point (labelled 1 in the picture above).
  3. Click in the 3D view to define the tip of the arc of hyperbola (labelled 2 in the picture above).
  4. Click in the 3D view to define the first end point (labelled 3 in the picture above).
  5. Click a fourth time in the 3D view to define the other end point (labelled 4 in the picture above).