Sketcher CreateArcOfHyperbola/es

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Sketcher CreateArcOfHyperbola and the translation is 30% complete.

Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎română • ‎русский

Sketcher Hyperbolic Arc.png Sketcher arco de hipérbola

Ubicación en el Menú
Sketch → Geometrías de croquis → Crear un arco de hipérbola
Entornos de trabajo
Sketcher
Atajo de teclado por defecto
None
Introducido en versión
0.17
Ver también
Sketcher arco de elipse, Sketcher arco de parábola


Descripción

This tool creates an arc of hyperbola by center, major radius and endpoints.

Sketcher Arc of Hyperbola 01.png

Utilización

  1. Press the Sketcher Hyperbolic Arc.png Create an arc of hyperbola button.
  2. Click in the 3D view to define the major radius center (labelled 1 in the picture above).
  3. Click in the 3D view to define the major radius length, which is also the tip of the arc of hyperbola (labelled 2 in the picture above).
  4. Move the mouse away from the two last selected points to see how the arc will look like. Click again when the approximate desired curvature is shown. This point will define the first end point (labelled 3 in the picture above).
  5. Click a fourth time in the 3D view to define the other end point (labelled 4 in the picture above).