Sketcher ConstrainParallel

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Sketcher ConstrainParallel and the translation is 14% complete.

Outdated translations are marked like this.
Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska

Sketcher ConstrainParallel.svg Constraint Parallel

Menüeintrag
Sketch → Sketcher constraints → Constrain parallel
Arbeitsbereich
Sketcher, PartDesign
Standardtastenkürzel
Shift + P
In der Version eingeführt
-
Siehe auch
Constraint Vertical, Constraint Horizontal


Beschreibung

Die Contrain Parallel-Beschränkung zwingt zwei selektierte gerade Linien zur Parallelität zueinander.

Operation

The sketch contains two randomly oriented lines.

ConstrainParallel1.png

Select both lines by clicking successively on each of them.

ConstrainParallel2.png

Apply the Constrain Parallel constraint by selecting the Constrain Parallel icon Sketcher ConstrainParallel.png from the Sketcher constraints toolbar or by selecting the Constraint Parallel menu item from the Sketcher constraints sub menu of the Sketcher (Sketcher workbench selected) or Part Design (Part Design workbench selected) menu item.

ConstrainParallel3.png

The selected lines are forced to be parallel to each other. Changing the orientation of one line will change the orientation of the other to be the same.