Sketcher ConstrainDistanceY

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Sketcher ConstrainDistanceY and the translation is 18% complete.

Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska

Sketcher ConstrainDistanceY.png Sketcher ConstrainDistanceY

Veja também
Sketch → Sketcher geometries → Constrain vertical distance
Bancadas de trabalho
Atalho padrão
Veja também
Constraint HorizontalDistance, Constraint Length


Fixes the vertical distance between 2 points or line ends. If only one point is selected, the distance is set to the sketch origin.

Sketcher ConstraintDistanceY example.png

How to use

  1. Pick one or two points or one line.
  2. Press the Sketcher ConstrainDistanceY.png Constrain vertical distance button.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate.

Note: the constraint tool can also be started with no prior selection, but will require selection of two points or one line. To set the distance to the origin, the sketch origin point needs to be selected as well. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.