Sketcher ConstrainDistanceX/ru

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Sketcher ConstrainDistanceX and the translation is 0% complete.

Outdated translations are marked like this.
Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska
Arrow-left.svg Previous: Sketcher ConstrainLock.png Lock

Constraint HorizontalDistance.svg Constraint HorizontalDistance

Расположение в меню
Sketch → Ограничения эскиза → Ограничения расстояния по горизонтали
Верстаки
Sketcher, PartDesign
Быстрые клавиши
отсутствуют
Представлено в версии
-
См. также
Ограничения расстояния, Ограничения расстояния по вертикали


Description

Fixes the horizontal distance between 2 points or line ends. If only one point is selected, the distance is set to the sketch origin.

Constraint H Distance.png

How to use

  1. Pick one or two points or one line.
  2. Press the Sketcher ConstrainDistanceX.png Constrain horizontal distance button.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate.

Note: the constraint tool can also be started with no prior selection, but will require selection of two points or one line. To set the distance to the origin, the sketch origin point needs to be selected as well. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.

Arrow-left.svg Previous: Sketcher ConstrainLock.png Lock