Vazba Vzdálenost Horizontálně

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Sketcher ConstrainDistanceX and the translation is 27% complete.

Outdated translations are marked like this.
Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska
Arrow-left.svg Previous: Sketcher ConstrainLock.png Lock

Sketcher ConstrainDistanceX.png Sketcher ConstrainDistanceX

Umístění Menu
Sketch → Sketcher constraints → Constrain horizontal distance
Pracovní stoly
Sketcher
Výchozí zástupce
Shift + H
Představen ve verzi
-
Viz také
Constraint Length, Constraint VerticalDistance


Popis

Stanoví horizontální vzdálenost mezi 2 body nebo konci přímek. Je-li vybrána pouze 1 položka, je vzdálenost stanovena k počátku.

Fixes the horizontal distance between 2 points or line ends. If only one point is selected, the distance is set to the sketch origin.

Constraint H Distance.png

Použití

  1. Vyberte jeden nebo dva body
  2. Aktivujte vazbu
  1. Pick one or two points or one line.
  2. Press the Sketcher ConstrainDistanceX.png Constrain horizontal distance button.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate.

Note: the constraint tool can also be started with no prior selection, but will require selection of two points or one line. To set the distance to the origin, the sketch origin point needs to be selected as well. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.

Arrow-left.svg Previous: Sketcher ConstrainLock.png Lock