Sketcher ConstrainDistance/ru

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Sketcher ConstrainDistance and the translation is 9% complete.

Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska

Constraint Length.svg Constraint Length

Расположение в меню
Sketch → Ограничения эскиза → Ограничения расстояния
Sketcher, PartDesign
Быстрые клавиши
Shift + D
Представлено в версии
См. также
Ограничения расстояния по горизонтали, Ограничения расстояния по вертикали


Constrain distance constrains the length of a line, the perpendicular distance between a point and a line or the distance between two points to have a specified value.

Sketcher ConstrainDistance example.png

How to use

  1. Pick two points or one line or one point and one line.
  2. Press the Sketcher ConstrainDistance.png Constrain distance button.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate.

Note: the constraint tool can also be started with no prior selection. To set the perpendicular distance between a point and a line, the point needs to be selected first. By default the command will be in continue mode to create new constraints; press the right mouse button or ESC once to quit the command.


If applicable please consider using the Horizontal distance or Vertical distance constraints instead. These constraints are more robust and faster to calculate than the here documented length constraint.