Bloque de Restricción

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Sketcher ConstrainBlock and the translation is 30% complete.

Outdated translations are marked like this.
Other languages:
English • ‎español • ‎français • ‎italiano • ‎română • ‎русский
Arrow-left.svg Previous: Sketcher ConstrainSymmetric.png Symmetric
Next: Lock Sketcher ConstrainLock.png Arrow-right.svg

Sketcher ConstrainBlock.svg Bloque de Restricción

Ubicación en el Menú
Sketch → Restricciones de croquis → Bloque de Restricción
Entornos de trabajo
Sketcher
Atajo de teclado por defecto
None
Introducido en versión
-
Ver también
Constrain Lock


Descripción

Constrain Block blocks a geometric element in place with a single constraint. Its main intended use is to work with B-Splines which can be difficult to fully constrain otherwise.

Utilización

  1. Select an element to constrain;
  2. Press the Sketcher ConstrainBlock.png Constrain Block button.

Note: step 1 and 2 can be reversed.

Arrow-left.svg Previous: Sketcher ConstrainSymmetric.png Symmetric
Next: Lock Sketcher ConstrainLock.png Arrow-right.svg