Sketcher CompCreateConic/es

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Sketcher CompCreateConic and the translation is 38% complete.

Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎română • ‎русский • ‎中文(中国大陆)‎

Sketcher CompCreateConic.png Sketcher Conics

Ubicación en el Menú
None (toolbar only)
Entornos de trabajo
Sketcher
Atajo de teclado por defecto
None
Introducido en versión
-
Ver también
None


Description

Create a conic is an icon button Sketcher CompCreateConic.png in the Sketcher geometries toolbar that groups tools to create curves based on a section of a cone. Click on the down arrow to its right to expand the icons below it and select a tool.

Types of conics

  • Sketcher CreateEllipse.png Ellipse by center : Draws an ellipse by center point, major radius point and minor radius point.
  • Sketcher CreateEllipse 3points.png Ellipse by 3 points : Draws an ellipse by major diameter (2 points) and minor radius point.
  • Sketcher Elliptical Arc.png Arc of ellipse : Draws an arc of ellipse by center point, major radius point, starting point and ending point.
  • Sketcher Hyperbolic Arc.png Arc of hyperbola: v0.17 and above Draws an arc of hyperbola.
  • Sketcher Parabolic Arc.png Arc of parabola: v0.17 and above Draws an arc of parabola.