Exemplul de Ship Geometries

This page is a translated version of the page Ship LoadExample and the translation is 43% complete.

Outdated translations are marked like this.

Other languages:

Create a new ship

Ship

Menu location
Ship Load
Ship design → Load‏‎ an example ship geometry
Workbenches
Ship
Default shortcut
None
Introduced in version
-
See also
None

Description

Introducere

FreeCAD-Ship lucrează pe Ship entities, are trebuie create în prealabil pe baza geometriei furnizate. formele geometrice trebuie să fie un solid sau un set de solide și trebuie să îndeplinească următoarele criterii:

Trebuie prevăzută toată geometria carenei (inclusiv părțile simetrice).
Partea tribordului, geometria tribordului trebuie poziționată în domeniul negativ a lui y.
Punctul de origine (0,0,0) este în secțiunea maestră Midship section (Midpoint between after and forward perpendicular) ți intersecția base line.

Ship works over Ship entities, that must be created on top of provided geometry. Geometry must be a solid, or set of solids. The following criteria must be taken into account:

All hull geometry must be provided (including symmetric bodies).
Starboard geometry must be included at negatives y domain.
Origin (0,0,0) point is the Midship section (Midpoint between after and forward perpendicular) and base line intersection.

Ship sign criteria

In order to help new users, Ship includes a geometries examples loader, with the following to choose from:

Series 60 from Iowa University
Wigley Canonical Ship
Series 60 Catamaran
Wigley Catamaran

Încărcarea geometriei pentru nave din seria 60

Pentru a ajuta utilizatorii noi, nava include un exemplu de încărcător de geometrie, cu următoarele opțiuni:

Seria 60 de la Iowa University
Wigley Canonical Ship
Seria 60 Catamaran
Wigley Catamaran

Executing the tool (Ship design/Load an example ship geometry) a task dialogue will shown. Select Series 60 from Iowa University and press Accept. Tool loads new document with s60_IowaUniversity geometry.

Warning, before editing anything! You are now working with the original example file. To preserve the original unedited example, you must first save it as a new file before editing anything.