Reverse Engineering Workbench

From FreeCAD Documentation
Reverse Engineering workbench icon

Introduction

The Reverse Engineering Workbench is intended to give you specific tools to convert shapes, solids, and meshes into parametric FreeCAD features.

At the moment there is no functionality present in this workbench. It is used as a sandbox by the programmers.

Tools

The Reverse Engineering tools are all located in the Reverse Engineering menu and the Reverse Engineering toolbar that appear when you load the Reverse Engineering workbench from the workbench dropdown menu.

  • Approximate a B-spline surface:

Development

Link to appropriate threads discussing this workbench