Pfad ProfilKanten

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Path ProfileEdges and the translation is 17% complete.

Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎română
Arrow-left.svg Previous: Path Profile Face.svg Profile from Face
Next: Pocket Path Pocket.svg Arrow-right.svg

Path Profile Edges.svg Path Profile Edges

Menu location
Path → Edge Profile
Workbenches
Path
Default shortcut
None
Introduced in version
-
See also
Path Job, Path Contour


Beschreibung

The Path Profile Edges.svg Path Profile Edges tool creates a simple contour path from selected edges. A Start point can be enabled from the Operation editor, using a location defined in the Property viewStart Points.

The Path ProfileEdge object is made to be part of a Path Job.svg Path Job.

Path Profile by Edges.png

Usage

  1. Select a complete loop of edges
  2. Invoke the Path Profile Edges tool several ways:
  3. Adjust the desired properties


Important Note: Path Profile Edges doesn't take care of other details of the object. You have to adjust the properties, especially the final depth, carefully, a mistake will destroy your work piece


Properties

The Path Profile Edges properties use similar properties to the Path Contour.svg Path Contour Properties.


Arrow-left.svg Previous: Path Profile Face.svg Profile from Face
Next: Pocket Path Pocket.svg Arrow-right.svg