CAM Array/ru
(Redirected from Path Array/ru)
Outdated translations are marked like this.
Path Array |
Системное название |
---|
Path Array |
Расположение в меню |
Path → Path Modification → Массив |
Верстаки |
Path |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
Нет |
Описание
The tool Array creates a new path by duplicating another path several times at a certain interval distance.
Применение
- Select the operation you want to repeat
- Press the Array button
- Press Apply
- Adjust the desired properties at the data box
Свойства
- ДанныеType: The type array (polar, linear one ore two directions)
- ДанныеOffset: The spacing between the array copies for each direction
- ДанныеCopies: The number of copies (not counting the original) for each direction
Scripting
Смотрите так же: Основы составления скриптов в FreeCAD.
Example:
#Place code example here.
CAM
- Project Commands: Job, Post Process, Check the CAM job for common errors, Export Template
- Tool Commands: Inspect CAM Commands, CAM Simulator, Finish Selecting Loop, Toggle the Active State of the Operation, ToolBit Library editor, ToolBit Dock
- Basic Operations: Profile, Pocket Shape, Drilling, Face, Helix, Adaptive, Slot, Engrave, Deburr, Vcarve
- 3D Operations: 3D Pocket, 3D Surface, Waterline
- CAM Modification: Copy the operation in the job, Array, Simple Copy
- Specialty Operations: Thread Milling
- Miscellaneous: Area, Area workplane
- ToolBit architecture: Tools, ToolShape, ToolBit, ToolBit Library, ToolController
- Additional: Preferences, Scripting
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web