Точка(Вершина)
Outdated translations are marked like this.
Точка(Вершина) |
Системное название |
---|
Part Point |
Расположение в меню |
Деталь → Создать примитивы... → Точка |
Верстаки |
Part(Деталь) |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
Примитивы |
Описание
Точка — это параметрический примитив, который можно создать с помощью команды Примитивы.... Её координаты относительны к системе координат, определенным в её свойстве ДанныеPlacement.
Применение
See Part Primitives.
Свойства
See also: Property editor.
A Part Point object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:
Данные
Attachment
The object has the same attachment properties as a Part Part2DObject.
Base
- ДанныеX (
Distance
): The X coordinate of the point. The default is0mm
. - ДанныеY (
Distance
): The Y coordinate of the point. The default is0mm
. - ДанныеZ (
Distance
): The Z coordinate of the point. The default is0mm
.
Программирование
See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.
A Part Point can be created with the addObject()
method of the document:
point = FreeCAD.ActiveDocument.addObject("Part::Vertex", "myPoint")
- Where
"myPoint"
is the name for the object. - The function returns the newly created object.
Example:
import FreeCAD as App
doc = App.activeDocument()
point = doc.addObject("Part::Vertex", "myPoint")
point.X = 1
point.Y = 2
point.Z = 3
doc.recompute()
Part
- Примитивы: Куб(Параллелограмм), Конус, Цилиндр, Сфера, Тор, Полый цилиндр,Примитивы, Связующие формы
- Создание и правка: Выдавливание, Построение фигуры вращения, Отражение, Скругление, Фаска, Создать плоскость из граней, Ruled Surface, Профиль, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Создать полый объект, Projection on surface, Прикрепление
- Булевы операции: Соединить, Разорвать связь, Compound Filter, Булевы операции, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Измерительные: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web