# Part: Offset

This page is a translated version of the page Part Offset and the translation is 14% complete.

Outdated translations are marked like this.

Gui Command explains how tools should be documented. See Draft ShapeString for an example of a well documented tool. Browse Category:UnfinishedDocu to see incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Other languages:
čeština • ‎Deutsch • ‎English • ‎français • ‎italiano • ‎polski • ‎română • ‎русский

Gui Command explains how tools should be documented. See Draft ShapeString for an example of a well documented tool. Browse Category:UnfinishedDocu to see incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Part Offset

Part → 3D Offset
Workbenches
Part, Complete
Default shortcut
None
Introduced in version
-
Thickness, Part 2D Offset

## Descriere

Instrumentul Offset Part 3D creează copii ale unei forme selectate la o anumită distanță față de forma de bază.

De completat

## Exemplu

1. Offset  : Distance to offset the faces of the shape
2. Mode  : Mode of creation . Skin creates a new shape around the source shape. Pipe ( todo ) . RectoVerso ( todo )
3. Join type : How the new corners are build up. Intersection gives sharp corners by linear extension of the edges. Arc and Tangent give rounded corners.
1. Option ː Intersection ː Allows offsets pointing inwards to "overflood" the gap by intersecting the resulting shape until opposite faces are reached.
2. Option ː Self Intersection ː ( todo )
3. Option ː Fill Offset ː When the shape was 2 dimensional , the gap inbetween the 2 shapes gets filled. The fill is now a solid, hence the source shape is not a solid . Thus boolean operations may lead to strange results. ( see exapmple ) .

Object with small offset and rounded ( arc ) corners.

Same object with sharp ( intersection ) corners.

Same object with thick distance overfilling the front left gap and allowed intersections.

Arbitrary shape ( draft poly as wire ) with a 3D Offset ( ignores MODE param )

same shape with a 3D Offset as SKIN and filled offset

filled offset with 2 Cylinders creating boolean cuts. Cylinder A goes through the FILL whilst Cylinder B only goes thru the FILL and NOT through the source 2D shape.

Previous: CompOffsetTools
Next: 2D Offset