Part Ellipse/ru

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Part Ellipse and the translation is 17% complete.

Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎română • ‎русский • ‎Türkçe

Part Ellipse.png Эллипс

Расположение в меню
Деталь → Создать примитивы... → Эллипс
Верстаки
Part, OpenSCAD
Быстрые клавиши
отсутствуют
Представлено в версии
-
См. также
..


Description

An Ellipse geometric primitive is available from the Create Primitives dialogue in the Part workbench.

The Create Primitives dialogue can be accessed via the CreatePrimitives icon Part CreatePrimitives.png located in the Part menu or the Part toolbar, in the Part Workbench.

This command will create a elliptical curved edge. With the default values, the elliptical curved edge will be closed and therefore will be an ellipse. If the properties Angle 1 or Angle 2 are changed from their default values (0 and 360) the edge will be an open curve.

Properties

  • Major radius: the major radius of the ellipse, the default value is 4
  • Minor radius: the minor radius of the ellipse, the default value is 2
  • Angle 1: start of the edge of the ellipse or elliptical curved edge, (degrees anti-clockwise), the default value is 0
  • Angle 2: end of the edge of the ellipse or elliptical curved edge, (degrees anti-clockwise), the default value is 360