Part: Attachment

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Part Attachment and the translation is 91% complete.

Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎română
Arrow-left.svg Previous: Part Measure Toggle Delta.svg Toggle Delta
FreeCAD.png

Descriere

Attachment este un utilitar pentru asocierea unui obiect cu altul. Obiectul asociat este legat de celălalt obiect, ceea ce înseamnă că dacă poziționarea acestuia este modificată ulterior, obiectul asociat se actualizează în noua sa poziție.

introduced in version 0.17

Cum se foloseste

  1. Selectați obiectul de atașat.
  2. Mergeți la meniul Part → Attachment....
    Notă: Atunci când se lucrează în PartDesign pentru a crea schițe, geometrie de referință sau primitive, etapele 1 și 2 nu sunt necesare: caseta de dialog Atașamentul este activat automat.
  3. Mai jos, în parametrii Attachment, Not attached poate fi citit. Primul buton de jos este etichetat Selecting… pentru a indica că se așteaptă o selecție în vizualizarea 3D .
  4. Selectați un element topologic pe obiectul care urmează să fie asociat: un vârf, o margine, o fațetă sau un plan. De asemenea, pot fi selectate geometrii de referință ale unei piese Part containers .
  5. Eticheta primului buton adoptă acum tipul de topologie selectat. În câmpul alb spre dreapta, se adaugă obiectul de referință și elementul său de referință. De exemplu, dacă o fațetă este selectată pe o primitivă tip cub, câmpul arată Box:Face6.
  6. Selectați un Attachment mode din listă. Modurile disponibile sunt filtrate prin referințele selectate. Sub titlul Attached with mode <mode description> este afișat sub antetul/headerul Attachment.
    Pentru informații în timp real despre modul de asociere, plasați cursorul mouse-ului peste unul dintre modurile în listă pentru a afișa un indiciu.
  7. Opțional, adăugați până la 3 referințe apăsând butoanele Reference2, Reference3, și Reference4 și repetând pasul 4.
  8. Optional deefiniți un Attachment Offset.
  9. Apăsați OK.

Opţiuni

Part Offset Tasks.png

Atașament

Dezactivat

Default, no reference selected .

Muchie Normal

Object is made perpendicular to edge. Optional vertex reference defines location .

Reference combinations
Edge
Edge, Vertex
Vertex, Edge

Align O-N-X

Matches object's origin with first referenced vertex, then aligns its normal and horizontal plane axis toward vertex/along line .

Reference combinations
Vertex, Vertex, Vertex
Vertex, Vertex, Edge
Vertex, Edge, Vertex
Vertex, Edge, Edge
Vertex, Vertex
Vertex, Edge

Align O-N-Y

Matches object's origin with first referenced vertex and aligns its normal and vertical plane axis toward vertex/along line .

Reference combinations
Vertex, Vertex, Vertex
Vertex, Vertex, Edge
Vertex, Edge, Vertex
Vertex, Edge, Edge
Vertex, Vertex
Vertex, Edge

Align O-X-Y

Matches object's origin with first referenced vertex and aligns its horizontal and vertical plane axes toward vertex/along line .

Reference combinations
Vertex, Vertex, Vertex
Vertex, Vertex, Edge
Vertex, Edge, Vertex
Vertex, Edge, Edge
Vertex, Vertex
Vertex, Edge

Align O-X-N

Matches object's origin with first referenced vertex and aligns its horizontal plane axis and normal toward vertex/along line .

Reference combinations
Vertex, Vertex, Vertex
Vertex, Vertex, Edge
Vertex, Edge, Vertex
Vertex, Edge, Edge
Vertex, Vertex
Vertex, Edge

Align O-Y-N

Matches object's origin with first referenced vertex and aligns its vertical plane axis and normal toward vertex/along line .

Reference combinations
Vertex, Vertex, Vertex
Vertex, Vertex, Edge
Vertex, Edge, Vertex
Vertex, Edge, Edge
Vertex, Vertex
Vertex, Edge

Align O-Y-X

Matches object's origin with first referenced vertex and aligns its vertical and horizontal plane axes toward vertex/along line .

Reference combinations
Vertex, Vertex, Vertex
Vertex, Vertex, Edge
Vertex, Edge, Vertex
Vertex, Edge, Edge
Vertex, Vertex
Vertex, Edge

Translatarea originii

Object's origin is aligned to matched vertex. Orientation is controlled by Placement property.

Reference combinations
Vertex.

Object's XY

Plane is aligned to XY local plane of linked object .

Reference combinations
Any, Conic.

Object's XZ

Plane is aligned to XZ local plane of linked object .

Reference combinations
Any, Conic.

Object's YZ

Plane is aligned to YZ local plane of linked object .

Reference combinations
Any, Conic

Plane face

Plane is aligned to coincide to planar face .

Reference combinations
Plane

Tangent to surface

Plane is made tangent to surface at vertex .

Reference combinations
Face, Vertex
Vertex, Face

Frenet NB

Plane is set to normal-binormal (NB) axes of Frenet-Serret coordinates at the point of the edge's curve that is closest to the vertex (or defined by MapPathParameter property, if vertex is not linked). The object's origin is translated to the vertex if the vertex is first, or kept at the curve if edge is first. This mode is similar to Normal to edge, except that X axis is well-defined.

Reference combinations
Curve
Curve, Vertex
Vertex, Curve
Attacher mode FrenetNB.png

Frenet TN

Plane is set to tangent-normal (TN) axes of Frenet-Serret coordinates at the point of the edge's curve that is closest to the vertex (or defined by MapPathParameter property, if vertex is not linked). The origin of sketch is translated to the vertex if the vertex is first, or kept at the curve if edge is first. Effectively, if the curve is planar, the sketching plane is the plane of the curve.

Reference combinations
Curve
Curve, Vertex
Vertex, Curve
Attacher mode FrenetTN.png

Frenet TB

Plane is set tangent-binormal (TB) axes of Frenet-Serret coordinates at the point of the edge's curve that is closest to the vertex (or defined by MapPathParameter property, if vertex is not linked). The origin of sketch is translated to the vertex if the vertex is first, or kept at the curve if edge is first.

Reference combinations
Curve
Curve, Vertex
Vertex, Curve
Attacher mode FrenetTB.png

Concentric

Aligns to plane to osculating circle of an edge. Optional Vertex link defines where .

Reference combinations
Curve
Circle
Curve, Vertex
Circle, Vertex
Vertex, Curve
Vertex, Circle

Revolution Section

Plane is perpendicular to edge, and Y axis is matched with axis of osculating circle. Optional Vertex link defines where .

Reference combinations
Curve
Circle
Curve, Vertex
Circle, Vertex
Vertex, Curve
Vertex, Circle

Plane by 3 points

Aligns XY plane to pass through three vertices .

Reference combinations
Vertex, Vertex, Vertex
Line, Vertex
Vertex, Line
Line, Line

Normal to 3 points

Aligns plane to pass through first two vertices, and perpendicular to plane that passes through 3 vertices .

Reference combinations
Vertex, Vertex, Vertex
Line, Vertex
Vertex, Line
Line, Line

Folding

Specialty mode for folding polyhedra. Select 4 edge in order: foldable edge, fold line, other fold line, other foldable edge. Plane will be aligned to folding the first edge. In the picture below, it is not required that both leafs to fold together be the same .

Reference combinations
Line, Line, Line, Line
Attacher mode Folding.png


Inertia 2-3

Object will be attached to a plane passing through second and third principal axes of inertia (passes through center of mass) .

Reference combinations
Any
Any, Any
Any, Any, Any
Any, Any, Any, Any

Attachment Offset

Attachment Offset is used to apply a linear or rotary offset from the referenced object. It becomes active when an attachment mode other than Deactivated has been selected .

  • X: sets an offset distance in the X axis of the reference object .
  • Y: sets an offset distance in the Y axis of the reference object .
  • Z: sets an offset distance in the Z axis of the reference object .
  • Yaw: rotates the attached object along the reference object's Z axis .
  • Pitch: rotates the attached object along the reference object's Y axis .
  • Roll: rotates the attached object along the reference object's X axis .
  • Flip sides: if checked, the attached object is reversed from its XY plane .

Limite

  • Containerele Part și Body nu sunt suportate. În timp ce este posibil să se utilizeze Atașament pentru a le alinia, atașamentul nu va fi legat parametric.
Arrow-left.svg Previous: Part Measure Toggle Delta.svg Toggle Delta
FreeCAD.png