PartDesign AdditiveBox/tr

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page PartDesign AdditiveBox and the translation is 7% complete.

Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎română • ‎Türkçe

PartDesign AdditiveBox.png PartDesign AdditiveBox

Menu location
Part Design → Create an additive primitive → Additive Box
Default shortcut
Introduced in version
See also
PartDesign Primitive additive


Inserts a primitive box in the active Body as the first feature, or fuses it to the existing feature(s).

introduced in version 0.17

PartDesign AdditiveBox example.png

How to use

  1. Press the PartDesign AdditiveBox.png Additive Box button. Note: the Additive Box is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. If a different primitive is displayed, click on the down arrow besides the icon and select Additive Box in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Box feature appears under the active Body.


The Box can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.


  • DATAAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
  • DATALabel: Label given to the Box object. Change to suit your needs.
  • DATALength: the Box's dimension in the X-direction.
  • DATAWidth: the Box's dimension in the Y-direction.
  • DATAHeight: the Box's dimension in the Z-direction.