Macro Compilare la tabella del foglio di disegno

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Macro CartoucheFC and the translation is 100% complete.

Other languages:
čeština • ‎Deutsch • ‎English • ‎français • ‎italiano

Macro CartoucheFC.png Cartiglio

Descrizione
Questa macro è una applicazione completa che permette di compilare la tabella del foglio di disegno fornito con FreeCAD. (Per il modulo Drawing).

Versione macro: 0.3
Ultima modifica: 2014-07-02
Versione FreeCAD: Tutte versioni usando Drawing Workbench
Download: ToolBar Icon
Autore
Mario52
Download
ToolBar Icon
Link
Versione macro
0.3
Data ultima modifica
2014-07-02
Versioni di FreeCAD
Tutte versioni usando Drawing Workbench
Scorciatoia
Nessuna
Vedere anche
Nessuno


Descrizione

Questa macro è una applicazione completa che permette di compilare tutti i campi della tabella della squadratura fornita con FreeCAD.

I campi della data e dell'ora sono separati dal trattino "meno" e si trovano sulla stessa riga di testo.

CartoucheFC


I campi in rosso sono i campi editabili, i "freecad:editable" , i campi in verde contengono le annotazioni precompilate inserite nel modello.
Vedere anche la versione con tutti i campi di testo editabili.

Utilizzo

Per il momento, modificare la pagine A3_Landscape.svg con Inkscape può disturbare il buono funzionamento del programma. Se volete togliere il simbolo di regione (circolo e trapezio) dal foglio, lavorate su una copia di A3_Landscape.svg ! Lo stesso problema si trova anche su FreeCAD

Notare: Non sono accettati alcuni caratteri come & $ (e forse anche altri caratteri speciali).

Se desiderate avere una funzione, potete farne richiesta nel forum Remplir cartouche

  • La finestra rimane sovrapposta alle altre finestre e viene utilizzata per controllare la tabella senza uscire dal programma principale.
  • Copiare il codice in un file denominato Macro_CartoucheFC.FCMacro e posizionarlo nella directory delle macro.
  • Dopo aver creato il foglio di disegno con il modulo Drawing di FreeCAD, eseguire la macro Macro_CartoucheFC.
  • All'avvio, il programma registra in memoria tutti i dati già presenti nella tabella del foglio (se è compilata), tutti i dati sono restituiti automaticamente utilizzando il pulsante Memo e tenuti in memoria fino alla chiusura del programma.
  • I pulsanti data D. e ora H. visualizzano la data e l'ora del sistema.
  • Il formato della data dipende dal simbolo selezionato: EU oppure US, che determina la localizzazione del formato. La commutazione non avviene automaticamente (se è stata inserita manualmente una data), quando si modifica il simbolo è necessario fare di nuovo clic sul pulsante della data (controllare prima di stampare).
  • Il campo A3 non è modicabile (questo programma è basato sulla tabella del foglio A3 di FreeCAD).
  • Il pulsante Symbole EU o US commuta il simbolo di proiezione "Scegli il tuo simbolo" che per impostazione predefinita viene visualizzato. Fare clic sul pulsante e controllare il simbolo sul foglio, fare clic una seconda volta per cambiare il simbolo.
  • La scelta di questo simbolo, influisce sul formato della data: EU = dd/MM/yyyy e US = MM/dd/yyyy.
  • Attenzione: Questo comando non passa attraverso il pulsante Applica e commuta direttamente il simbolo ad ogni pressione del tasto, verificare sempre sul vostro foglio se il simbolo è corretto.
  • Il pulsante Clean cancella tutti i campi del modulo. È possibile ripristinare i dati originali utilizzando il pulsante Memo.
  • Il pulsante Apply salva tutti i campi del modulo nel foglio. È possibile ripristinare i dati originali utilizzando il pulsante Memo (tranne che per i simboli localizzati che lavorano in modo indipendente e sono immediatamente attivi).

Codice

ToolBar Icon Macro CartoucheFC.png

Macro_CartoucheFC.FCMacro

# -*- coding: utf-8 -*-
# Macro_CartoucheFC.py
# Remplir les zones du cartouche de la feuille originale de FreeCAD
# http://www.freecadweb.org/wiki/index.php?title=Macro_CartoucheFC/fr
# il faut que la page (drawing viewer) s'appelle " Page " qui est le nom par défaut du module Drawing
# Fill the area of the cartridge
# http://www.freecadweb.org/wiki/index.php?title=Macro_CartoucheFC
# It is necessary that the page (drawing viewer) is called "Page", which is the default name of the Drawing module
# ver 0.3
# Created: 02/07/2014
# Created:  by mario52
# PyQt and PySide 

#OS: Windows Vista
#Word size: 32-bit
#Version: 0.14.3700 (Git)
#Branch: releases/FreeCAD-0-14
#Hash: 32f5aae0a64333ec8d5d160dbc46e690510c8fe1
#Python version: 2.6.2
#Qt version: 4.5.2
#Coin version: 3.1.0
#SoQt version: 1.4.1

try:
    import PyQt4
    from PyQt4 import QtCore, QtGui
except Exception:
    import PySide
    from PySide import QtCore, QtGui

import Draft, Part, FreeCAD, math, PartGui, FreeCADGui
from math import sqrt, pi, sin, cos, asin
from FreeCAD import Base

global  path

path = FreeCAD.ConfigGet("AppHomePath")

def heure():
    return QtCore.QTime().currentTime().toString('hh:mm:ss')
def dateEu():
    return QtCore.QDate().currentDate().toString('dd/MM/yyyy') # forme euro
def dateUs():
    return QtCore.QDate().currentDate().toString('MM/dd/yyyy') # forme us
def dateComp():
    return QtCore.QDate().currentDate().toString('dddd d MMMM yyyy') # Retourne "dimanche 20 Juillet 69"

try:
    _fromUtf8 = QtCore.QString.fromUtf8
except AttributeError:
    def _fromUtf8(s):
        return s
try:
    _encoding = QtGui.QApplication.UnicodeUTF8
    def _translate(context, text, disambig):
        return QtGui.QApplication.translate(context, text, disambig, _encoding)
except AttributeError:
    def _translate(context, text, disambig):
        return QtGui.QApplication.translate(context, text, disambig)

def errorDialog(msg):
    # Create a simple dialog QMessageBox
    # The first argument indicates the icon used: one of QtGui.QMessageBox.{NoIcon, Information, Warning, Critical, Question} 
    diag = QtGui.QMessageBox(QtGui.QMessageBox.Critical,u"Error Message",msg)
    try:
        diag.setWindowFlags(PyQt4.QtCore.Qt.WindowStaysOnTopHint)  #PyQt4 cette fonction met la fenêtre en avant
    except Exception:
        diag.setWindowFlags(PySide.QtCore.Qt.WindowStaysOnTopHint) #PySide cette fonction met la fenêtre en avant
    #diag.setWindowModality(QtCore.Qt.ApplicationModal) # la fonction a été désactivée pour favoriser "WindowStaysOnTopHint"
    diag.exec_()

def symbol_EU(depx,depy):    #symbol_EU
    try:
        App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_US")
    except:
        None
    try:
        App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_EU")
    except:
        None
    try:
        App.getDocument(App.ActiveDocument.Name).removeObject("SymbolUS")
    except:
        None
    try:
        App.getDocument(App.ActiveDocument.Name).removeObject("SymbolEU")
    except:
        None
    App.activeDocument().addObject('Sketcher::SketchObject','Symbol_EU')
    App.activeDocument().Symbol_EU.Placement = App.Placement(App.Vector(0.0,0.0,0.0),App.Rotation(0.000000,0.000000,0.000000,1.000000))
    App.ActiveDocument.Symbol_EU.addGeometry(Part.Line(App.Vector(-7.5,0.0,0.0),App.Vector(20.0,0.0,0.0)))

    App.ActiveDocument.Symbol_EU.Placement = App.Placement(App.Vector(0.0,0.0),App.Rotation(0.000000,0.000000,0.000000,1.000000))
    App.ActiveDocument.Symbol_EU.addGeometry(Part.Line(App.Vector(12.50,-7.5,0),App.Vector(12.50,7.5,0.0)))
    App.ActiveDocument.Symbol_EU.addGeometry(Part.Circle(App.Vector(12.50,0.0,0),App.Vector(0,0,1),2.5))
    App.ActiveDocument.Symbol_EU.addGeometry(Part.Circle(App.Vector(12.50,0.0,0),App.Vector(0,0,1),5.0))

    App.ActiveDocument.Symbol_EU.addGeometry(Part.Line(App.Vector(5.0,5.0,0.0),App.Vector(-5.0,2.5,0.0)))
    App.ActiveDocument.Symbol_EU.addGeometry(Part.Line(App.Vector(-5.0,-2.5,0.0),App.Vector(-5.0,2.5,0.0)))
    App.ActiveDocument.Symbol_EU.addGeometry(Part.Line(App.Vector(5.0,-5.0,0.0),App.Vector(-5.0,-2.5,0.0)))
    App.ActiveDocument.Symbol_EU.addGeometry(Part.Line(App.Vector(5.0,-5.0,0.0),App.Vector(5.0,5.0,0.0)))
    Gui.getDocument(App.ActiveDocument.Name).resetEdit()
    FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_EU").LineColor = (0.00,0.00,0.00)
    App.ActiveDocument.recompute()

    App.activeDocument().addObject('Drawing::FeatureViewPart','SymbolEU')
    App.activeDocument().SymbolEU.Source = App.activeDocument().Symbol_EU
    App.activeDocument().SymbolEU.Direction = (0.0,0.0,1.0)
    App.activeDocument().SymbolEU.X = depx
    App.activeDocument().SymbolEU.Y = depy
    App.activeDocument().SymbolEU.Scale = 0.8
    App.activeDocument().Page.addObject(App.activeDocument().SymbolEU)
    App.ActiveDocument.recompute()
#    App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_EU")
    FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_EU").Visibility = False

def symbol_US(depx,depy):    #symbol_US
    try:
        App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_US")
    except:
        None
    try:
        App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_EU")
    except:
        None
    try:
        App.getDocument(App.ActiveDocument.Name).removeObject("SymbolUS")
    except:
        None
    try:
        App.getDocument(App.ActiveDocument.Name).removeObject("SymbolEU")
    except:
        None
    App.activeDocument().addObject('Sketcher::SketchObject','Symbol_US')
    App.activeDocument().Symbol_US.Placement = App.Placement(App.Vector(0.0,0.0,0.0),App.Rotation(0.000000,0.000000,0.000000,1.000000))
    App.ActiveDocument.Symbol_US.addGeometry(Part.Line(App.Vector(-7.5,0.0,0.0),App.Vector(20.0,0.0,0.0)))

    App.ActiveDocument.Symbol_US.Placement = App.Placement(App.Vector(0.0,0.0),App.Rotation(0.000000,0.000000,0.000000,1.000000))
    App.ActiveDocument.Symbol_US.addGeometry(Part.Line(App.Vector(0.0,-7.5,0.0),App.Vector(0.0,7.5,0.0)))
    App.ActiveDocument.Symbol_US.addGeometry(Part.Circle(App.Vector(0.0,0.0,0.0),App.Vector(0,0,1),2.5))
    App.ActiveDocument.Symbol_US.addGeometry(Part.Circle(App.Vector(0.0,0.0,0.0),App.Vector(0,0,1),5.0))

    App.ActiveDocument.Symbol_US.addGeometry(Part.Line(App.Vector(17.5,5.0,0.0),App.Vector(7.5,2.5,0.0)))
    App.ActiveDocument.Symbol_US.addGeometry(Part.Line(App.Vector(7.5,-2.5,0.0),App.Vector(7.5,2.5,0.0)))
    App.ActiveDocument.Symbol_US.addGeometry(Part.Line(App.Vector(17.5,-5.0,0.0),App.Vector(7.5,-2.5,0.0)))
    App.ActiveDocument.Symbol_US.addGeometry(Part.Line(App.Vector(17.5,-5.0,0.0),App.Vector(17.5,5.0,0.0)))
    Gui.getDocument(App.ActiveDocument.Name).resetEdit()
    FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_US").LineColor = (0.00,0.00,0.00)
    App.ActiveDocument.recompute()

    App.activeDocument().addObject('Drawing::FeatureViewPart','SymbolUS')
    App.activeDocument().SymbolUS.Source = App.activeDocument().Symbol_US
    App.activeDocument().SymbolUS.Direction = (0.0,0.0,1.0)
    App.activeDocument().SymbolUS.X = depx
    App.activeDocument().SymbolUS.Y = depy
    App.activeDocument().SymbolUS.Scale = 0.8
    App.activeDocument().Page.addObject(App.activeDocument().SymbolUS)
    App.ActiveDocument.recompute()
#    App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_US")
    FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_US").Visibility = False

try:
    DESIGNED_BY = App.activeDocument().getObject("Page").EditableTexts[0] #lineEdit01 DESIGNED_BY
    CREATION_DATE = App.activeDocument().getObject("Page").EditableTexts[1] #lineEdit02 CREATION_DATE date
    CREA_DATE = CREATION_DATE[0:10] # lineEdit02h date
    CREA_TIME = CREATION_DATE[13:21] # lineEdit02h heure
    CHECKED_BY = App.activeDocument().getObject("Page").EditableTexts[2] # lineEdit03
    CHECK_DATE = App.activeDocument().getObject("Page").EditableTexts[3] # lineEdit04 date
    CHEC_DATE = CHECK_DATE[0:10] # lineEdit04 date
    CHEC_TIME = CHECK_DATE[13:21] # lineEdit04h heure
    SIZE = "A3"  # lineEdit05
    SCALE = App.activeDocument().getObject("Page").EditableTexts[4] # lineEdit06
    WEIGHT = App.activeDocument().getObject("Page").EditableTexts[5] # lineEdit07
    DRAWING_NUMBER = App.activeDocument().getObject("Page").EditableTexts[6] # lineEdit08
    SHEET = App.activeDocument().getObject("Page").EditableTexts[7] # lineEdit09
    TITLE = App.activeDocument().getObject("Page").EditableTexts[8] # textEdit_01
    DESCRIPTION = App.activeDocument().getObject("Page").EditableTexts[9] # textEdit_02

except:
    errorDialog("erreur cartouche")
try:
    try:
        lineEdit18 = App.activeDocument().getObject("Note_I").Text[0] 
    except:
        lineEdit18 = ""
    try:
        lineEdit17 = App.activeDocument().getObject("Note_H").Text[0] 
    except:
        lineEdit17 = ""
    try:
        lineEdit16 = App.activeDocument().getObject("Note_G").Text[0] 
    except:
        lineEdit16 = ""
    try:
        lineEdit15 = App.activeDocument().getObject("Note_F").Text[0] 
    except:
        lineEdit15 = ""
    try:
        lineEdit14 = App.activeDocument().getObject("Note_E").Text[0] 
    except:
        lineEdit14 = ""
    try:
        lineEdit13 = App.activeDocument().getObject("Note_D").Text[0] 
    except:
        lineEdit13 = ""
    try:
        lineEdit12 = App.activeDocument().getObject("Note_C").Text[0] 
    except:
        lineEdit12 = ""
    try:
        lineEdit11 = App.activeDocument().getObject("Note_B").Text[0] 
    except:
        lineEdit11 = ""
    try:
        lineEdit10 = App.activeDocument().getObject("Note_A").Text[0] 
    except:
        lineEdit10 = ""
    try:
        lineEdit20 = App.activeDocument().getObject("CopyRight").Text[0] 
    except:
        lineEdit20 = ""
except:
    errorDialog("erreur note")

class Ui_MainWindow(object):

    def __init__(self, MainWindow):
        self.window = MainWindow
#___________________________________________________________________________________

        MainWindow.setObjectName(_fromUtf8("MainWindow"))
        MainWindow.resize(810, 440)
        MainWindow.setMaximumSize(QtCore.QSize(810, 480))
        self.centralWidget = QtGui.QWidget(MainWindow)
        self.centralWidget.setObjectName(_fromUtf8("centralWidget"))

#        self.pushButton01 = QtGui.QPushButton(self.centralWidget)
#        self.pushButton01.setGeometry(QtCore.QRect(115, 360, 93, 28))
#        self.pushButton01.setObjectName(_fromUtf8("pushButton01"))
#        self.pushButton01.clicked.connect(self.on_pushButton01_clicked) #connection pushButton01

        self.pushButton02 = QtGui.QPushButton(self.centralWidget)
        self.pushButton02.setGeometry(QtCore.QRect(225, 360, 93, 28))
        self.pushButton02.setObjectName(_fromUtf8("pushButton02"))
        self.pushButton02.clicked.connect(self.on_pushButton02_clicked) #connection pushButton02

        self.pushButton03 = QtGui.QPushButton(self.centralWidget)
        self.pushButton03.setGeometry(QtCore.QRect(335, 360, 93, 28))
        self.pushButton03.setObjectName(_fromUtf8("pushButton03"))
        self.pushButton03.clicked.connect(self.on_pushButton03_clicked) #connection pushButton03

        self.pushButton04 = QtGui.QPushButton(self.centralWidget)
        self.pushButton04.setGeometry(QtCore.QRect(445, 360, 93, 28))
        self.pushButton04.setObjectName(_fromUtf8("pushButton04"))
        self.pushButton04.clicked.connect(self.on_pushButton04_clicked) #connection pushButton04

        self.pushButton05 = QtGui.QPushButton(self.centralWidget)
        self.pushButton05.setGeometry(QtCore.QRect(555, 360, 93, 28))
        self.pushButton05.setObjectName(_fromUtf8("pushButton05"))
        self.pushButton05.clicked.connect(self.on_pushButton05_clicked) #connection pushButton05

        self.pushButton06 = QtGui.QPushButton(self.centralWidget)
        self.pushButton06.setGeometry(QtCore.QRect(170, 56, 20, 20))
        self.pushButton06.setObjectName(_fromUtf8("pushButton06"))
        self.pushButton06.clicked.connect(self.on_pushButton06_clicked) #connection pushButton06

        self.pushButton07 = QtGui.QPushButton(self.centralWidget)
        self.pushButton07.setGeometry(QtCore.QRect(190, 56, 20, 20))
        self.pushButton07.setObjectName(_fromUtf8("pushButton07"))
        self.pushButton07.clicked.connect(self.on_pushButton07_clicked) #connection pushButton07

        self.pushButton08 = QtGui.QPushButton(self.centralWidget)
        self.pushButton08.setGeometry(QtCore.QRect(170, 136, 20, 20))
        self.pushButton08.setObjectName(_fromUtf8("pushButton08"))
        self.pushButton08.clicked.connect(self.on_pushButton08_clicked) #connection pushButton08

        self.pushButton09 = QtGui.QPushButton(self.centralWidget)
        self.pushButton09.setGeometry(QtCore.QRect(190, 136, 20, 20))
        self.pushButton09.setObjectName(_fromUtf8("pushButton09"))
        self.pushButton09.clicked.connect(self.on_pushButton09_clicked) #connection pushButton09

        self.pushButton10 = QtGui.QPushButton(self.centralWidget)
        self.pushButton10.setGeometry(QtCore.QRect(100, 220, 101, 20))
        self.pushButton10.setObjectName(_fromUtf8("pushButton10"))
        self.pushButton10.clicked.connect(self.on_pushButton10_clicked) #connection pushButton10

        self.lineEdit_01 = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_01.setGeometry(QtCore.QRect(20, 20, 181, 16))
        font = QtGui.QFont()
        font.setPointSize(7)
        self.lineEdit_01.setFont(font)
        self.lineEdit_01.setObjectName(_fromUtf8("lineEdit_01"))
        self.lineEdit_01.setText(DESIGNED_BY)

        self.lineEdit_02 = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_02.setGeometry(QtCore.QRect(20, 60, 82, 16))
        font = QtGui.QFont()
        font.setPointSize(7)
        self.lineEdit_02.setFont(font)
        self.lineEdit_02.setObjectName(_fromUtf8("lineEdit_02"))
        self.lineEdit_02.setText(CREA_DATE)

        self.lineEdit_02h = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_02h.setGeometry(QtCore.QRect(98, 60, 72, 16))
        font = QtGui.QFont()
        font.setPointSize(7)
        self.lineEdit_02h.setFont(font)
        self.lineEdit_02h.setObjectName(_fromUtf8("lineEdit_02h"))
        self.lineEdit_02h.setText(CREA_TIME)

        self.lineEdit_03 = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_03.setGeometry(QtCore.QRect(20, 100, 181, 16))
        font = QtGui.QFont()
        font.setPointSize(7)
        self.lineEdit_03.setFont(font)
        self.lineEdit_03.setObjectName(_fromUtf8("lineEdit_03"))
        self.lineEdit_03.setText(CHECKED_BY)

        self.lineEdit_04 = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_04.setGeometry(QtCore.QRect(20, 140, 82, 16))
        font = QtGui.QFont()
        font.setPointSize(7)
        self.lineEdit_04.setFont(font)
        self.lineEdit_04.setObjectName(_fromUtf8("lineEdit_04"))
        self.lineEdit_04.setText(CHEC_DATE)

        self.lineEdit_04h = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_04h.setGeometry(QtCore.QRect(98, 140, 72, 16))
        font = QtGui.QFont()
        font.setPointSize(7)
        self.lineEdit_04h.setFont(font)
        self.lineEdit_04h.setObjectName(_fromUtf8("lineEdit_04h"))
        self.lineEdit_04h.setText(CHEC_TIME)

        self.lineEdit_05 = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_05.setGeometry(QtCore.QRect(20, 180, 61, 61))
        font = QtGui.QFont()
        font.setPointSize(17)
        font.setBold(False)
        font.setWeight(50)
        self.lineEdit_05.setFont(font)
        self.lineEdit_05.setAlignment(QtCore.Qt.AlignCenter)
        self.lineEdit_05.setObjectName(_fromUtf8("lineEdit_05"))
        self.lineEdit_05.setText(SIZE)

        self.lineEdit_06 = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_06.setGeometry(QtCore.QRect(20, 280, 61, 41))
        font = QtGui.QFont()
        font.setPointSize(10)
        self.lineEdit_06.setFont(font)
        self.lineEdit_06.setAlignment(QtCore.Qt.AlignCenter)
        self.lineEdit_06.setObjectName(_fromUtf8("lineEdit_06"))
        self.lineEdit_06.setText(SCALE)

        self.lineEdit_07 = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_07.setGeometry(QtCore.QRect(100, 280, 101, 41))
        font = QtGui.QFont()
        font.setPointSize(10)
        self.lineEdit_07.setFont(font)
        self.lineEdit_07.setAlignment(QtCore.Qt.AlignCenter)
        self.lineEdit_07.setObjectName(_fromUtf8("lineEdit_07"))
        self.lineEdit_07.setText(WEIGHT)

        self.lineEdit_08 = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_08.setGeometry(QtCore.QRect(220, 280, 341, 41))
        self.lineEdit_08.setObjectName(_fromUtf8("lineEdit_08"))
        self.lineEdit_08.setText(DRAWING_NUMBER)

        self.lineEdit_09 = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_09.setGeometry(QtCore.QRect(570, 280, 81, 41))
        self.lineEdit_09.setObjectName(_fromUtf8("lineEdit_09"))
        self.lineEdit_09.setText(SHEET)

        self.lineEdit_10 = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_10.setGeometry(QtCore.QRect(690, 290, 101, 30))
        self.lineEdit_10.setObjectName(_fromUtf8("lineEdit_10"))
        self.lineEdit_10.setText(lineEdit10)

        self.lineEdit_11 = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_11.setGeometry(QtCore.QRect(690, 260, 101, 30))
        self.lineEdit_11.setObjectName(_fromUtf8("lineEdit_11"))
        self.lineEdit_11.setText(lineEdit11)

        self.lineEdit_12 = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_12.setGeometry(QtCore.QRect(690, 230, 101, 30))
        self.lineEdit_12.setObjectName(_fromUtf8("lineEdit_12"))
        self.lineEdit_12.setText(lineEdit12)

        self.lineEdit_13 = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_13.setGeometry(QtCore.QRect(690, 200, 101, 30))
        self.lineEdit_13.setObjectName(_fromUtf8("lineEdit_13"))
        self.lineEdit_13.setText(lineEdit13)

        self.lineEdit_14 = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_14.setGeometry(QtCore.QRect(690, 170, 101, 30))
        self.lineEdit_14.setObjectName(_fromUtf8("lineEdit_14"))
        self.lineEdit_14.setText(lineEdit14)

        self.lineEdit_15 = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_15.setGeometry(QtCore.QRect(690, 140, 101, 30))
        self.lineEdit_15.setObjectName(_fromUtf8("lineEdit_15"))
        self.lineEdit_15.setText(lineEdit15)

        self.lineEdit_16 = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_16.setGeometry(QtCore.QRect(690, 110, 101, 30))
        self.lineEdit_16.setObjectName(_fromUtf8("lineEdit_16"))
        self.lineEdit_16.setText(lineEdit16)

        self.lineEdit_17 = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_17.setGeometry(QtCore.QRect(690, 80, 101, 30))
        self.lineEdit_17.setObjectName(_fromUtf8("lineEdit_17"))
        self.lineEdit_17.setText(lineEdit17)

        self.lineEdit_18 = QtGui.QLineEdit(self.centralWidget)
        self.lineEdit_18.setGeometry(QtCore.QRect(690, 50, 101, 30))
        self.lineEdit_18.setObjectName(_fromUtf8("lineEdit_18"))
        self.lineEdit_18.setText(lineEdit18)

        self.lineEdit_20 = QtGui.QLineEdit(self.centralWidget) # Copyright
        self.lineEdit_20.setGeometry(QtCore.QRect(20, 330, 771, 22))
        self.lineEdit_20.setObjectName(_fromUtf8("lineEdit_20"))
        self.lineEdit_20.setText(lineEdit20)

        self.textEdit_01 = QtGui.QTextEdit(self.centralWidget)
        self.textEdit_01.setGeometry(QtCore.QRect(220, 20, 431,60 ))
        font = QtGui.QFont()
        font.setPointSize(15)
        font.setBold(True)
        font.setWeight(75)
        self.textEdit_01.setFont(font)
        self.textEdit_01.setObjectName(_fromUtf8("textEdit_01"))
        self.textEdit_01.setText(TITLE)

        self.textEdit_02 = QtGui.QTextEdit(self.centralWidget)
        self.textEdit_02.setGeometry(QtCore.QRect(220, 90, 431, 60))
        self.textEdit_02.setObjectName(_fromUtf8("textEdit_02"))
        self.textEdit_02.setText(DESCRIPTION)

#        self.graphicsView_01 = QtGui.QGraphicsView(self.centralWidget)
#        self.graphicsView_01.setGeometry(QtCore.QRect(100, 160, 101, 81))
#        brush = QtGui.QBrush(QtGui.QColor(0, 170, 255))
#        brush.setStyle(QtCore.Qt.NoBrush)
#        self.graphicsView_01.setBackgroundBrush(brush)
#        self.graphicsView_01.setObjectName(_fromUtf8("graphicsView_01"))

        self.textEdit_03 = QtGui.QTextEdit(self.centralWidget)
        self.textEdit_03.setGeometry(QtCore.QRect(100, 160, 101, 55))
        self.textEdit_03.setAlignment(QtCore.Qt.AlignCenter)
        self.textEdit_03.setObjectName(_fromUtf8("textEdit_03"))
        self.textEdit_03.setText("Select your Symbol")

        self.graphicsView_02 = QtGui.QGraphicsView(self.centralWidget)
        self.graphicsView_02.setGeometry(QtCore.QRect(220, 160, 431, 81))#570, 160, 81, 81
        self.graphicsView_02.setObjectName(_fromUtf8("graphicsView_02"))

        self.label_01 = QtGui.QLabel(self.centralWidget)
        self.label_01.setGeometry(QtCore.QRect(20, 0, 91, 16))
        self.label_01.setObjectName(_fromUtf8("label_01"))

        self.label_02 = QtGui.QLabel(self.centralWidget)
        self.label_02.setGeometry(QtCore.QRect(20, 40, 53, 16))
        self.label_02.setObjectName(_fromUtf8("label_02"))

        self.label_03 = QtGui.QLabel(self.centralWidget)
        self.label_03.setGeometry(QtCore.QRect(20, 80, 101, 16))
        self.label_03.setObjectName(_fromUtf8("label_03"))

        self.label_04 = QtGui.QLabel(self.centralWidget)
        self.label_04.setGeometry(QtCore.QRect(20, 120, 91, 16))
        self.label_04.setObjectName(_fromUtf8("label_04"))

        self.label_05 = QtGui.QLabel(self.centralWidget)
        self.label_05.setGeometry(QtCore.QRect(20, 160, 53, 16))
        self.label_05.setObjectName(_fromUtf8("label_05"))

        self.label_06 = QtGui.QLabel(self.centralWidget)
        self.label_06.setGeometry(QtCore.QRect(20, 260, 53, 16))
        self.label_06.setObjectName(_fromUtf8("label_06"))

        self.label_07 = QtGui.QLabel(self.centralWidget)
        self.label_07.setGeometry(QtCore.QRect(100, 260, 101, 16))
        self.label_07.setObjectName(_fromUtf8("label_07"))

        self.label_08 = QtGui.QLabel(self.centralWidget)
        self.label_08.setGeometry(QtCore.QRect(220, 260, 121, 16))
        self.label_08.setObjectName(_fromUtf8("label_08"))

        self.label_09 = QtGui.QLabel(self.centralWidget)
        self.label_09.setGeometry(QtCore.QRect(570, 260, 53, 16))
        self.label_09.setObjectName(_fromUtf8("label_09"))

        self.label_10 = QtGui.QLabel(self.centralWidget)
        self.label_10.setGeometry(QtCore.QRect(670, 290, 16, 33))
        font = QtGui.QFont()
        font.setPointSize(12)
        font.setBold(True)
        font.setWeight(75)
        self.label_10.setFont(font)
        self.label_10.setObjectName(_fromUtf8("label_10"))

        self.label_11 = QtGui.QLabel(self.centralWidget)
        self.label_11.setGeometry(QtCore.QRect(670, 260, 16, 33))
        font = QtGui.QFont()
        font.setPointSize(12)
        font.setBold(True)
        font.setWeight(75)
        self.label_11.setFont(font)
        self.label_11.setObjectName(_fromUtf8("label_11"))

        self.label_12 = QtGui.QLabel(self.centralWidget)
        self.label_12.setGeometry(QtCore.QRect(670, 230, 16, 33))
        font = QtGui.QFont()
        font.setPointSize(12)
        font.setBold(True)
        font.setWeight(75)
        self.label_12.setFont(font)
        self.label_12.setObjectName(_fromUtf8("label_12"))

        self.label_13 = QtGui.QLabel(self.centralWidget)
        self.label_13.setGeometry(QtCore.QRect(670, 200, 18, 33))
        font = QtGui.QFont()
        font.setPointSize(12)
        font.setBold(True)
        font.setWeight(75)
        self.label_13.setFont(font)
        self.label_13.setObjectName(_fromUtf8("label_13"))

        self.label_14 = QtGui.QLabel(self.centralWidget)
        self.label_14.setGeometry(QtCore.QRect(670, 170, 15, 33))
        font = QtGui.QFont()
        font.setPointSize(12)
        font.setBold(True)
        font.setWeight(75)
        self.label_14.setFont(font)
        self.label_14.setObjectName(_fromUtf8("label_14"))

        self.label_15 = QtGui.QLabel(self.centralWidget)
        self.label_15.setGeometry(QtCore.QRect(670, 140, 14, 33))
        font = QtGui.QFont()
        font.setPointSize(12)
        font.setBold(True)
        font.setWeight(75)
        self.label_15.setFont(font)
        self.label_15.setObjectName(_fromUtf8("label_15"))

        self.label_16 = QtGui.QLabel(self.centralWidget)
        self.label_16.setGeometry(QtCore.QRect(670, 110, 18, 33))
        font = QtGui.QFont()
        font.setPointSize(12)
        font.setBold(True)
        font.setWeight(75)
        self.label_16.setFont(font)
        self.label_16.setObjectName(_fromUtf8("label_16"))

        self.label_17 = QtGui.QLabel(self.centralWidget)
        self.label_17.setGeometry(QtCore.QRect(670, 80, 18, 33))
        font = QtGui.QFont()
        font.setPointSize(12)
        font.setBold(True)
        font.setWeight(75)
        self.label_17.setFont(font)
        self.label_17.setObjectName(_fromUtf8("label_17"))

        self.label_18 = QtGui.QLabel(self.centralWidget)
        self.label_18.setGeometry(QtCore.QRect(670, 50, 10, 33))
        font = QtGui.QFont()
        font.setPointSize(12)
        font.setBold(True)
        font.setWeight(75)
        self.label_18.setFont(font)
        self.label_18.setObjectName(_fromUtf8("label_18"))

        self.label_19 = QtGui.QLabel(self.centralWidget)
        self.label_19.setGeometry(QtCore.QRect(720, 15, 100, 33))
        self.label_19.setObjectName(_fromUtf8("label_19"))

        MainWindow.setCentralWidget(self.centralWidget)
        self.menuBar = QtGui.QMenuBar(MainWindow)
        self.menuBar.setGeometry(QtCore.QRect(0, 0, 810, 26))
        self.menuBar.setObjectName(_fromUtf8("menuBar"))
        MainWindow.setMenuBar(self.menuBar)
        self.statusBar = QtGui.QStatusBar(MainWindow)
        self.statusBar.setObjectName(_fromUtf8("statusBar"))
        MainWindow.setStatusBar(self.statusBar)

        self.retranslateUi(MainWindow)
        QtCore.QMetaObject.connectSlotsByName(MainWindow)

    def retranslateUi(self, MainWindow):
        try:
            MainWindow.setWindowFlags(PyQt4.QtCore.Qt.WindowStaysOnTopHint)  # PyQt4 cette fonction met la fenêtre en avant
        except Exception:
            MainWindow.setWindowFlags(PySide.QtCore.Qt.WindowStaysOnTopHint) # PySide cette fonction met la fenêtre en avant

        MainWindow.setWindowTitle(_translate("MainWindow", "Cartouche", None))
#        self.pushButton01.setText(_translate("MainWindow", "Position", None))
        self.pushButton02.setText(_translate("MainWindow", "Quitter", None))
        self.pushButton03.setText(_translate("MainWindow", "Memo", None))
        self.pushButton04.setText(_translate("MainWindow", "Nettoyer", None))
        self.pushButton05.setText(_translate("MainWindow", "Appliquer", None))
        self.pushButton06.setText(_translate("MainWindow", "D.", None))
        self.pushButton07.setText(_translate("MainWindow", "H.", None))
        self.pushButton08.setText(_translate("MainWindow", "D.", None))
        self.pushButton09.setText(_translate("MainWindow", "H.", None))
        self.pushButton10.setText(_translate("MainWindow", "Symbole EU", None))


        self.label_01.setText(_translate("MainWindow", "Designed by :", None))
        self.label_02.setText(_translate("MainWindow", "Date :", None))
        self.label_03.setText(_translate("MainWindow", "Checked by :", None))
        self.label_04.setText(_translate("MainWindow", "Date :", None))
        self.label_05.setText(_translate("MainWindow", "Size :", None))
        self.label_06.setText(_translate("MainWindow", "Scale :", None))
        self.label_07.setText(_translate("MainWindow", "Weight (Kg) :", None))
        self.label_08.setText(_translate("MainWindow", "Drawing number :", None))
        self.label_09.setText(_translate("MainWindow", "Sheet :", None))
        self.label_10.setText(_translate("MainWindow", "A", None))
        self.label_11.setText(_translate("MainWindow", "B", None))
        self.label_12.setText(_translate("MainWindow", "C", None))
        self.label_13.setText(_translate("MainWindow", "D", None))
        self.label_14.setText(_translate("MainWindow", "E", None))
        self.label_15.setText(_translate("MainWindow", "F", None))
        self.label_16.setText(_translate("MainWindow", "G", None))
        self.label_17.setText(_translate("MainWindow", "H", None))
        self.label_18.setText(_translate("MainWindow", "I", None))
        self.label_19.setText(_translate("MainWindow", "Notes", None))
#______________________________________________________________________________________
    # Boutons
    def on_pushButton10_clicked(self):    # Bouton /Symbole
        if self.textEdit_03.toPlainText()=="Symbole US":
            self.pushButton10.setText(_translate("MainWindow", "Symbole US", None))
            self.textEdit_03.setText("Symbole EU")
            symbol_EU(247.5,263.5) #(247.5,263.5)
        else:
            self.pushButton10.setText(_translate("MainWindow", "Symbole EU", None))
            self.textEdit_03.setText("Symbole US")
            symbol_US(247.5,263.5) #(247.5,263.5)
    def on_pushButton09_clicked(self):    # Bouton /heure document
        self.lineEdit_04h.setText(str(heure()))
    def on_pushButton08_clicked(self):    # Bouton date/ document
        if self.textEdit_03.toPlainText()=="Symbole US":
            self.lineEdit_04.setText(str(dateUs()))
        else:
            self.lineEdit_04.setText(str(dateEu()))
    def on_pushButton07_clicked(self):    # Bouton /heure checked
        self.lineEdit_02h.setText(str(heure()))
    def on_pushButton06_clicked(self):    # Bouton date/ checked
        if self.textEdit_03.toPlainText()=="Symbole US":
            self.lineEdit_02.setText(str(dateUs()))
        else:
            self.lineEdit_02.setText(str(dateEu()))
    def on_pushButton05_clicked(self):    # Bouton Appliquer
        DESIGNED_BY = self.lineEdit_01.text()     
        CREATION_DATE = self.lineEdit_02.text()+" - "+self.lineEdit_02h.text()
        CHECKED_BY = self.lineEdit_03.text()
        CHECK_DATE = self.lineEdit_04.text()+" - "+self.lineEdit_04h.text()
        SIZE  = "A3" # self.lineEdit_05.text()
        SCALE = self.lineEdit_06.text()
        WEIGHT = self.lineEdit_07.text()
        DRAWING_NUMBER = self.lineEdit_08.text()
        SHEET = self.lineEdit_09.text()
        TITLE = self.textEdit_01.toPlainText()
        DESCRIPTION = self.textEdit_02.toPlainText()
        SYMBOL = self.textEdit_03.toPlainText()
        try:
            FreeCAD.getDocument (App.ActiveDocument.Name).getObject("Page").EditableTexts = [unicode(DESIGNED_BY, 'utf-8'), unicode(CREATION_DATE, 'utf-8'), unicode(CHECKED_BY, 'utf-8'), unicode(CHECK_DATE, 'utf-8'), unicode(SCALE, 'utf-8'), unicode(WEIGHT, 'utf-8'), unicode(DRAWING_NUMBER, 'utf-8'), unicode(SHEET, 'utf-8'), unicode(TITLE, 'utf-8'), unicode(DESCRIPTION, 'utf-8'),]
        except Exception:
            FreeCAD.getDocument (App.ActiveDocument.Name).getObject("Page").EditableTexts = [DESIGNED_BY.encode('utf-8'), CREATION_DATE.encode('utf-8'), CHECKED_BY.encode('utf-8'), CHECK_DATE.encode('utf-8'), SCALE.encode('utf-8'), WEIGHT.encode('utf-8'), DRAWING_NUMBER.encode('utf-8'), SHEET.encode('utf-8'), TITLE.encode('utf-8'), DESCRIPTION.encode('utf-8'),]

        #print App.ActiveDocument.Name
        try:
            App.activeDocument().removeObject('Note_I')
        except:
            None
        try:
            App.activeDocument().removeObject('Note_H')
        except:
            None
        try:
            App.activeDocument().removeObject('Note_G')
        except:
            None
        try:
            App.activeDocument().removeObject('Note_F')
        except:
            None
        try:
            App.activeDocument().removeObject('Note_E')
        except:
            None
        try:
            App.activeDocument().removeObject('Note_D')
        except:
            None
        try:
            App.activeDocument().removeObject('Note_C')
        except:
            None
        try:
            App.activeDocument().removeObject('Note_B')
        except:
            None
        try:
            App.activeDocument().removeObject('Note_A')
        except:
            None
        try:
            App.activeDocument().removeObject('CopyRight')
        except:
            None
        if self.lineEdit_18.text() != "":
            App.activeDocument().addObject('Drawing::FeatureViewAnnotation','Note_I')
            App.activeDocument().Note_I.X = 391.0
            App.activeDocument().Note_I.Y = 232
            App.activeDocument().Note_I.Scale = 3.0
            App.activeDocument().Note_I.Text = str(self.lineEdit_18.text())
            App.activeDocument().Page.addObject(App.activeDocument().Note_I)
        if self.lineEdit_17.text() != "":
            App.activeDocument().addObject('Drawing::FeatureViewAnnotation','Note_H')
            App.activeDocument().Note_H.X = 391.0
            App.activeDocument().Note_H.Y = 238.8
            App.activeDocument().Note_H.Scale = 3.0
            App.activeDocument().Note_H.Text = str(self.lineEdit_17.text())
            App.activeDocument().Page.addObject(App.activeDocument().Note_H)
        if self.lineEdit_16.text() != "":
            App.activeDocument().addObject('Drawing::FeatureViewAnnotation','Note_G')
            App.activeDocument().Note_G.X = 391.0
            App.activeDocument().Note_G.Y = 245.4
            App.activeDocument().Note_G.Scale = 3.0
            App.activeDocument().Note_G.Text = str(self.lineEdit_16.text())
            App.activeDocument().Page.addObject(App.activeDocument().Note_G)
        if self.lineEdit_15.text() != "":
            App.activeDocument().addObject('Drawing::FeatureViewAnnotation','Note_F')
            App.activeDocument().Note_F.X = 391.0
            App.activeDocument().Note_F.Y = 252
            App.activeDocument().Note_F.Scale = 3.0
            App.activeDocument().Note_F.Text = str(self.lineEdit_15.text())
            App.activeDocument().Page.addObject(App.activeDocument().Note_F)
        if self.lineEdit_14.text() != "":
            App.activeDocument().addObject('Drawing::FeatureViewAnnotation','Note_E')
            App.activeDocument().Note_E.X = 391.0
            App.activeDocument().Note_E.Y = 258.6
            App.activeDocument().Note_E.Scale = 3.0
            App.activeDocument().Note_E.Text = str(self.lineEdit_14.text())
            App.activeDocument().Page.addObject(App.activeDocument().Note_E)
        if self.lineEdit_13.text() != "":
            App.activeDocument().addObject('Drawing::FeatureViewAnnotation','Note_D')
            App.activeDocument().Note_D.X = 391.0
            App.activeDocument().Note_D.Y = 265.2
            App.activeDocument().Note_D.Scale = 3.0
            App.activeDocument().Note_D.Text = str(self.lineEdit_13.text())
            App.activeDocument().Page.addObject(App.activeDocument().Note_D)
        if self.lineEdit_12.text() != "":
            App.activeDocument().addObject('Drawing::FeatureViewAnnotation','Note_C')
            App.activeDocument().Note_C.X = 391.0
            App.activeDocument().Note_C.Y = 271.8
            App.activeDocument().Note_C.Scale = 3.0
            App.activeDocument().Note_C.Text =  str(self.lineEdit_12.text())
            App.activeDocument().Page.addObject(App.activeDocument().Note_C)
        if self.lineEdit_11.text() != "":
            App.activeDocument().addObject('Drawing::FeatureViewAnnotation','Note_B')
            App.activeDocument().Note_B.X = 391.0
            App.activeDocument().Note_B.Y = 278.4
            App.activeDocument().Note_B.Scale = 3.0
            App.activeDocument().Note_B.Text = str(self.lineEdit_11.text())
            App.activeDocument().Page.addObject(App.activeDocument().Note_B)
        if self.lineEdit_10.text() != "":
            App.activeDocument().addObject('Drawing::FeatureViewAnnotation','Note_A')
            App.activeDocument().Note_A.X = 391.0
            App.activeDocument().Note_A.Y = 285.0
            App.activeDocument().Note_A.Scale = 3.0
            App.activeDocument().Note_A.Text = str(self.lineEdit_10.text())
            App.activeDocument().Page.addObject(App.activeDocument().Note_A)
        if self.lineEdit_20.text() != "":
            App.activeDocument().addObject('Drawing::FeatureViewAnnotation','CopyRight')
            App.activeDocument().CopyRight.X = 221
            App.activeDocument().CopyRight.Y = 286
            App.activeDocument().CopyRight.Scale = 3.0
            App.activeDocument().CopyRight.Text = str(self.lineEdit_20.text())
            App.activeDocument().Page.addObject(App.activeDocument().CopyRight)

        App.ActiveDocument.recompute()

    def on_pushButton04_clicked(self):    # Bouton nettoyer
        try:
            App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_US")
        except:
            None
        try:
            App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_EU")
        except:
            None
        try:
            App.getDocument(App.ActiveDocument.Name).removeObject("SymbolUS")
        except:
            None
        try:
            App.getDocument(App.ActiveDocument.Name).removeObject("SymbolEU")
        except:
            None
        DESIGNED_BY = ""    ;self.lineEdit_01.setText("")
        CREATION_DATE = ""  ;self.lineEdit_02.setText("")
        self.lineEdit_02h.setText("")
        CHECKED_BY = ""     ;self.lineEdit_03.setText("")
        CHECK_DATE = ""     ;self.lineEdit_04.setText("")
        self.lineEdit_04h.setText("")
        SIZE  = "A3"        ;self.lineEdit_05.setText("A3")
        SCALE = ""          ;self.lineEdit_06.setText("")
        WEIGHT = ""         ;self.lineEdit_07.setText("")
        DRAWING_NUMBER = "" ;self.lineEdit_08.setText("")
        SHEET = ""          ;self.lineEdit_09.setText("")
        TITLE = ""          ;self.textEdit_01.setText("")
        DESCRIPTION = ""    ;self.textEdit_02.setText("")
        
        self.lineEdit_10.setText("")
        self.lineEdit_11.setText("")
        self.lineEdit_12.setText("")
        self.lineEdit_13.setText("")
        self.lineEdit_14.setText("")
        self.lineEdit_15.setText("")
        self.lineEdit_16.setText("")
        self.lineEdit_17.setText("")
        self.lineEdit_18.setText("")
        self.lineEdit_20.setText("")

    def on_pushButton03_clicked(self):    # Bouton Memo
        self.lineEdit_01.setText(DESIGNED_BY)
        self.lineEdit_02.setText(CREA_DATE)
        self.lineEdit_02h.setText(CREA_TIME)
        self.lineEdit_03.setText(CHECKED_BY)
        self.lineEdit_04.setText(CHEC_DATE)
        self.lineEdit_04h.setText(CHEC_TIME)
        self.lineEdit_05.setText(SIZE)
        self.lineEdit_06.setText(SCALE)
        self.lineEdit_07.setText(WEIGHT)
        self.lineEdit_08.setText(DRAWING_NUMBER)
        self.lineEdit_09.setText(SHEET)
        self.textEdit_01.setText(TITLE)
        self.textEdit_02.setText(DESCRIPTION)

        self.lineEdit_18.setText(lineEdit18)
        self.lineEdit_17.setText(lineEdit17)
        self.lineEdit_16.setText(lineEdit16)
        self.lineEdit_15.setText(lineEdit15)
        self.lineEdit_14.setText(lineEdit14)
        self.lineEdit_13.setText(lineEdit13)
        self.lineEdit_12.setText(lineEdit12)
        self.lineEdit_11.setText(lineEdit11)
        self.lineEdit_10.setText(lineEdit10)
        self.lineEdit_20.setText(lineEdit20)

    def on_pushButton02_clicked(self):    # Bouton Quitter
        App.Console.PrintMessage("Terminé\r\n")
        self.window.hide()
#    def on_pushButton01_clicked(self):    # Bouton appel de Position
#        MainWindow.resize(210, 480)
#        executer()
#        MainWindow.resize(810, 480)
#______________________________________________________________________________________

MainWindow = QtGui.QMainWindow()
ui = Ui_MainWindow(MainWindow)
MainWindow.show()

Altro

I campi non hanno nessun limite di lunghezza, controllare la tabella.

Questo programma crea nel progetto il simbolo regionale di proiezione, non toccatelo viene salvato come nascosto, in modo invisibile.

Se si desidera cancellarlo, rimuovere il segno di commento a queste righe e viceversa.

#    App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_EU")
    FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_EU").Visibility = False
et
#    App.getDocument(App.ActiveDocument.Name).removeObject("Symbol_US")
    FreeCADGui.getDocument(App.ActiveDocument.Name).getObject("Symbol_US").Visibility = False


(a volte si produce un errore di esecuzione quando il simbolo viene cancellato)

Questo modulo funziona con il foglio di disegno incluso in FreeCAD che si chiama Page, non cambiare il nome di questo foglio!

Revisioni

ver 0.3 02/07/2014 converted to PyQt4 and PySide