Image Module/画像モジュール

From FreeCAD Documentation
(Redirected from Image Module/ja)
This page is a translated version of the page Image Workbench and the translation is 13% complete.
Outdated translations are marked like this.
The Image Workbench is no longer included after version 0.20.
Its functionality has been integrated in Std Base. See Std Import and Std ViewLoadImage.
Image workbench icon

Introduction

画像モジュールは様々なタイプのビットマップ画像bitmap images を扱うためのもので、FreeCADでそれらの画像を開くことを可能にします

Tools

フィーチャー

  • Like a Sketch, an imported image can be attached to one of the main planes XY, XZ, or YZ, and given a positive or negative offset.
  • The image is imported with relation of 1 pixel to 1 millimeter.
  • The recommendation is to have the imported image at a reasonable resolution.

Workflow

A major use of this workbench is tracing over the image, with the Draft or Sketcher tools, in order to generate a solid body based on the contours of the image.

Tracing over an image works best if the image has a small negative offset, for example, -0.1 mm, from the working plane. This means that the image will be slightly behind the plane where you draw your 2D geometry, so you won't draw on the image itself.

The offset of the image can be set during import, or changed later through its properties.