Image CreateImagePlane/ru

From FreeCAD Documentation
This page is a translated version of the page Image CreateImagePlane and the translation is 19% complete.
Outdated translations are marked like this.

Image CreateImagePlane

Системное название
Image CreateImagePlane
Расположение в меню
Toolbars → Создать двумерное изображение в трёхмерном пространстве
Верстаки
Image
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Image Open, Image Scaling

Описание

The CreateImagePlane tool imports a bitmap image and places it on one of the XY, YZ or XZ planes.

Применение

  1. Press the Image CreateImagePlane button.
  2. Select the desired image in your system.
  3. Choose the plane where the image will be placed, give an offset value, and press OK.

The resulting ImagePlane object uses the ratio of 1 pixel to 1 millimeter; in order for the image to display well, it should have enough resolution.

When importing the image, you may wish to add an offset of -0.1 mm in order to place the image slightly behind the working plane; this will make it easy to trace (draw on top) the image with the Draft or Sketcher tools.

If no offset is given to the image initially, its position can still be adjusted in the property editor.

Свойства

Base

  • ДанныеPosition: specifies the coordinates of the base point of the image plane.
  • ДанныеAngle: specifies the angle of rotation of the image plane.
  • ДанныеAxis: specifies the axis used for the rotation angle.

Image Plane

  • ДанныеImage File: specifies the image to use for this plane.
  • ДанныеXSize: specifies the width of the image plane.
  • ДанныеYSize: specifies the height of the image plane.