Ambienti complementari

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page External workbenches and the translation is 7% complete.

Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎português • ‎română • ‎русский • ‎中文(中国大陆)‎

Alcuni utenti esperti hanno esteso FreeCAD con vari ambienti aggiuntivi personalizzati, che non sono ancora integrati nel codice sorgente FreeCAD, ma che sono facili da aggiungere a un'installazione FreeCAD esistente. Le istruzioni sono disponibili nelle pagine indicate in seguito:

Most extensions can be installed from the Addon Manager, menu Tools → Addon manager; specific instructions are provided in each extension page.


Back to Workbenches

BIM
mira a implementare gli strumenti e il flusso di lavoro per Building Information Modeling (BIM) in FreeCAD.
Defeaturing
fornisce gli strumenti per modificare i modelli STEP rimuovendo le funzioni selezionate.
DynamicData
consente di creare degli oggetti contenitore per contenere delle proprietà personalizzate.
Flamingo
una serie di comandi e oggetti FreeCAD personalizzati che consentono di velocizzare il disegno di strutture e tubazioni.
Kicad StepUp
ha lo scopo di aiutare gli utenti di KiCad e FreeCAD a collaborare nel design elettrico (ECAD) e meccanico (MCAD).
WorkFeatures
aggiunge una vasta gamma di oggetti di supporto come piani di allineamento o assi e degli strumenti di aiuto nel posizionare e allineare gli oggetti lungo questi oggetti di supporto.
Manipulator
ha lo scopo di aiutare gli utenti di FreeCAD ad allineare, spostare, ruotare e misurare gli oggetti 3D attraverso una GUI amichevole.
SheetMetal
fornisce strumenti per progettare e dispiegare parti in lamiera.
WebTools
contiene una serie di strumenti per comunicare con i servizi Web dall'interno di FreeCAD.

General

  • BIM aims to implement complete Building Information Modeling (BIM) tools and workflow in FreeCAD. It builds on top of the Arch Workbench
  • Defeaturing provides tools to edit STEP models by removing selected features.
  • DynamicData allows creation of container objects for holding custom properties.
  • EM Workbench ElectroMagnetic Workbench for FastFieldSolvers free tools.
  • Flamingo a set of customized FreeCAD commands and objects that help to speed-up the drawing of frames and pipelines.
  • KicadStepUp is aimed at helping both KiCad and FreeCAD users in collaborating with electrical (ECAD) and mechanical (MCAD) design.
  • Reinforcement augments the Arch Workbench with additional rebar tools.
  • SheetMetal provides tools to design and unfold sheet metal parts.
  • WebTools contains a series of tools to communicate with Web services from within FreeCAD.
  • LCInterlocking (github link) tools to create parts for laser-cutters. Add tabs and hinges. Export to SVG


Assembly

As of FreeCAD 0.18 there is no official assembly workbench. However, several external tools have been created and some being under active development to manipulate objects to produce assemblies.

  • Assembly2 provides tools to create multi-part assemblies. Consider using A2plus.
  • A2plus provides tools to create multi-part assemblies. Extension of the Assembly2 workbench.
  • Assembly3 (github link) is in development and requires a own FreeCAD branch. It is the most complex solution and supports thinsg like interactive kinematics.
  • Assembly4 (github link) is a solution based on the own FreeCAD branch that Assembly3 is using. It does not work with constraints at all and focuses on building structures with Local Coordinate Systems (LCS). This is computation friendly and should allow even to assembly large structures with may parts. This is the newest of the assembly workbenches and is indended more as a demonstrator.
  • Manipulator is aimed to help FreeCAD users in aligning, moving, rotating and measuring 3D objects through a friendly GUI.
  • WorkFeatures adds a wide range of helper objects such as alignment planes or axes, and tools to help you to position and align objects along those helper objects.

Deprecated extensions

Drawing Dimensioning
adds powerful dimensioning and annotation tools to the Drawing Workbench.

TODO:

  • Bolts
  • Cfd
  • EaglePCB_2_FreeCAD
  • Gears
  • FreeCAD-CuraEngine
  • Animation
  • Lattice2
  • Exploded Animation
  • Fasteners
  • GeoData
  • Nurbs
  • Persistent toolbars
  • Retr3D
  • Timber
(February 2019) These extensions lack documentation in this wiki. If you are the developer or a user of these addons, consider creating a page for them, or providing a link to their documentation
  • Assembly3
  • Bolts
  • Cfd
  • EaglePCB_2_FreeCAD
  • Gears
  • FreeCAD-CuraEngine
  • Animation
  • Lattice2
  • Exploded Animation
  • Fasteners
  • GeoData
  • Nurbs
  • Persistent toolbars
  • Retr3D
  • Timber