Draft WorkingPlane

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Draft WorkingPlane and the translation is 8% complete.

Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎română • ‎русский • ‎Türkçe

Draft WorkingPlane.png Draft WorkingPlane

Emplacement du menu
Draft → Snap → WorkingPlane
Draft, Arch
Raccourci par défaut
Introduit dans la version
Voir aussi


Place toujours le point d'accrochage sur le plan de travail actuel, même si vous vous accrochez à un point situé en dehors de ce plan de travail.

This method always places a new point on the current working plane, even if you also use another snapping method and select a point outside of that working plane.

In other words, it projects an external snapping point to the current working plane.

Draft Snap WorkingPlane.png

Snapping the second point of a line to one endpoint of an edge of a body, which is then projected on the XY working plane


  1. Make sure the working plane is set with Draft SelectPlane.svg Draft SelectPlane.
  2. Make sure Snap Lock.svg Draft ToggleSnap and Snap WorkingPlane.svg Snap WorkingPlane are turned on.
  3. Optionally turn on any other Draft Snap method.
  4. Choose a Draft tool to draw a shape.
  5. Move the cursor over any line, edge, vertex, or object, like you would do with other snapping methods.
  6. A small white circle will indicate the point on the working plane to which your new point will be attached.
  7. Click to attach your new point.