Draft WireToBSpline

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Draft WireToBSpline and the translation is 5% complete.

Outdated translations are marked like this.
Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎română • ‎русский • ‎svenska • ‎Türkçe
Arrow-left.svg Previous: Draft Edit Improved.svg Edit Improved
Next: Add point Draft AddPoint.svg Arrow-right.svg

Draft WireToBSpline.svg Telden BSpline çevir

Menü konumu
Drafting → Wire to BSpline
Tezgahlar
Draft, Arch
Varsayılan kısayol
Hiçbiri
Versiyonda tanıtıldı
-
Ayrıca bkz
Hiçbiri


Description

This tool converts Draft Wires to Draft BSplines, and vice-versa.

Draft Wire2BSpline example.jpg

Convertir a wire to a B-Spline, and a closed B-Spline to a closed wire


How to use

  1. Select a Draft Wire or a Draft BSpline. The tool is disabled if no object is selected.
  2. Press the Draft WireToBSpline.svg Draft WireToBSpline button.

A new object will be created; the original object will not be modified.

Note: if a closed wire with sharp edges is used to create a spline, the new object may have self intersecting curve segments, and may not be visible in the 3D view. If this is the case, manually set DATAMake Face to False to see the new shape, or set DATAClosed to False to create an open shape.

Options

There are no options for this tool. Either it works with the selected object or not.

Scripting

See also: Draft API and FreeCAD Scripting Basics.

There is no programming interface available for the WireToBSpline tool; however, creating a new object from the points of another is simple.

The Points attribute of an object is a list with the points that comprise that object; this list can be passed to functions that build geometry. Each point is defined by its FreeCAD.Vector, with units in millimeters.

Example:

import FreeCAD, Draft

# Make a spline from the points of a wire
p1 = FreeCAD.Vector(1000, 1000, 0)
p2 = FreeCAD.Vector(2000, 1000, 0)
p3 = FreeCAD.Vector(2500, -1000, 0)
p4 = FreeCAD.Vector(3500, -500, 0)

base_wire = Draft.makeWire([p1, p2, p3, p4])

points1 = base_wire.Points
spline = Draft.makeBSpline(points1)

# Make a wire from the points of a spline
base_spline = Draft.makeBSpline([-p1, -1.3*p2, -1.2*p3, -2.1*p4])

points2 = base_spline.Points
Wire = Draft.makeWire(points2)
Arrow-left.svg Previous: Draft Edit Improved.svg Edit Improved
Next: Add point Draft AddPoint.svg Arrow-right.svg