Draft ToggleSnap

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Draft ToggleSnap and the translation is 33% complete.

Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎română • ‎русский • ‎svenska • ‎Türkçe

Draft ToggleSnap.svg Draft ToggleSnap

Menüeintrag
Draft → Utilities → Toggle snap
Arbeitsbereich
Draft, Arch
Standardtastenkürzel
None
In der Version eingeführt
-
Siehe auch
Draft Snap, Draft ToggleGrid


Beschreibung

Dieser Befehl schaltet den Einrastungsmodus um (ein/aus).

Draft Tray

Draft Tray which allows you to set the working plane and grid, which could be used with the snapping options


How to use

  1. Press the Draft SelectPlane.svg Draft SelectPlane button to set a working plane.
  2. Right click on the toolbar space, or go to the menu View → Toolbars, and make sure the Draft Snap toolbar is visible.
  3. Press the Draft Grid.svg Draft ToggleGrid button to make the grid visible.
  4. Press the Snap Lock.svg Draft ToggleSnap button to make the snapping methods available.

The Draft SelectPlane.svg SelectPlane button is present in the Draft Tray toolbar, which only appears in the Draft and Arch workbenches.