Draft ToggleContinueMode

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Draft ToggleContinueMode and the translation is 11% complete.

Outdated translations are marked like this.
Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎română • ‎русский • ‎svenska • ‎Türkçe

Draft ToggleContinueMode.svg Draft ToggleContinueMode

Menyplacering
Draft -> Utilities -> Toggle continue mode
Arbetsbänk(ar)
Draft, Arch
Standard genväg
None
Introducerad i version
-
Se även
None


Description

Many geometry creation tools from the Draft and Arch Workbenches allow you to activate the continue checkbox. If continue mode is on, the drawing tool will restart after you finish with it, allowing you to draw another object with the same tool, without pressing the tool button again.

This allows you to create several objects in a row until you deactivate the continue checkbox or exit the tool.

How to use

  1. Start a command such as Draft Line or Arch Wall.
  2. Press the Draft ToggleContinueMode.png Toggle continue mode checkbox.
  3. Use the tool normally, placing various lines or walls, one after the other.
  4. Press Esc or the Close button to abort the current command; objects already placed will remain.