Draft Slope/ru

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Draft Slope and the translation is 0% complete.

Outdated translations are marked like this.
Other languages:
English • ‎español • ‎français • ‎italiano • ‎română • ‎русский
Arrow-left.svg Previous: Draft VisGroup.svg VisGroup
Next: AutoGroup Draft AutoGroup.svg Arrow-right.svg

Draft Slope.svg Draft Slope

Расположение в меню
Черчение → Утилиты → Set Slope
Верстаки
Draft, Arch
Быстрые клавиши
отсутствуют
Представлено в версии
-
См. также


Description

For a selected Draft Line or Draft Wire drawn on the XY plane, the Draft Slope tool increases the Z coordinate of all vertices after the first one, so that the line or wire has the defined slope.

The equivalent action is editing the object and moving the points manually to a new position.

Draft Slope example.png

Horizontal line; line with slope changed to 45°


How to use

  1. Select a Draft Line or Draft Wire object.
  2. Go to the menu Draft → Utilities → Draft Slope.png Set Slope.
  3. Set the desired slope value, and press the OK button.

The slope value is the tangent of the elevation angle:

  • 0 means the line is completely horizontal, because tan(0°) = 0.
  • 1 means 45 degrees up, because tan(45°) = 1.
  • 0.577 means 30 degrees up, because tan(30°) = 0.577.
  • 1.732 means 60 degrees up, because tan(60°) = 1.732, etc.

Negative values are also possible:

  • -1 means 45 degrees down, because tan(-45°) = -1, etc.
Arrow-left.svg Previous: Draft VisGroup.svg VisGroup
Next: AutoGroup Draft AutoGroup.svg Arrow-right.svg