# Draft Point/ru

Jump to: navigation, search
This page is a translated version of the page Draft Point and the translation is 0% complete.

Outdated translations are marked like this.
Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎română • ‎русский • ‎svenska • ‎Türkçe
Расположение в меню
Черчение -> Точка
Верстаки
Draft, Arch
Быстрые клавиши
P T
Представлено в версии
-
См. также
...

## Description

The Point tool creates a simple point in the current work plane, handy to serve as reference for placing lines, wires, or other objects later. It uses the Draft Linestyle (only the color) set on the Draft Tray.

A single point placed on the working plane

## How to use

1. Press the button, or press P then T keys.
2. Click a point on the 3D view, or type a coordinate and press the button.

## Options

• To enter coordinates manually, simply enter the numbers, then press Enter between each X, Y and Z component. You can press the button when you have the desired values to insert the point.
• Press T or click the checkbox to toggle continue mode. If continue mode is on, the point tool will restart after you place a point, allowing you to place another one without pressing the tool button again.
• Press Esc or the Close button to abort the current command.

## Properties

• DATAX: the X coordinate of the point.
• DATAY: the Y coordinate of the point.
• DATAZ: the Z coordinate of the point.

## Scripting

See also: Draft API and FreeCAD Scripting Basics.

The Point tool can be used in macros and from the Python console by using the following function:

```Point = makePoint(X=0, Y=0, Z=0, color=None, name="Point", point_size=5)
Point = makePoint(point, Y=0, Z=0, color=None, name="Point", point_size=5)```
• Creates a `Point` object in the specified `X`, `Y` and `Z` coordinates, with units in millimeters. If no coordinates are given the point is created at the origin (0,0,0).
• If `X` is a `point` defined by a `FreeCAD.Vector`, it is used.
• `color` is a tuple `(R, G, B)` that indicates the color of the point in the RGB scale; each value in the tuple should be in the range from `0` to `1`.
• `name` is the name of the object.
• `point_size` is the size of the object in pixels, if the graphical user interface is loaded.

Example:

```import random, FreeCAD, Draft

Point1 = Draft.makePoint(1600, 1400, 0)

p2 = FreeCAD.Vector(-3200, 1800, 0)
Point2 = Draft.makePoint(p2, color=(0.5, 0.3, 0.6), point_size=10)

# Make a loop and create ten points with random coordinates that extend
# from -L to L on both X and Y. Also choose a random color and size.

# Change value to define the area covered by the points
L = 1000
centered = FreeCAD.Placement(FreeCAD.Vector(-L,-L,0), FreeCAD.Rotation())
Rectangle = Draft.makeRectangle(2*L, 2*L, placement=centered)

for i in range(10):
x = 2*L*random.random() - L
y = 2*L*random.random() - L
z = 0
r = random.random()
g = random.random()
b = random.random()
size = 15*random.random() + 5
Draft.makePoint(x, y, z, color=(r, g, b), point_size=size)```