Draft Ortho

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Draft Ortho and the translation is 9% complete.

Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎русский • ‎Türkçe
Arrow-left.svg Previous: Draft Center.png Center

Draft Ortho.png Draft Ortho

Emplacement du menu
Draft → Snap → Ortho
Ateliers
Draft, Arch
Raccourci par défaut
Introduit dans la version
-
Voir aussi


Description

This method snaps to a point on an imaginary line that originates from the previous point, and extends infinitely at specific increments of 45°; this includes 0°, 90°, 135°, 180°, 225°, 270°, and other integer multiples.

Draft Snap Ortho.png

Snapping the second point of a line to a point that makes an angle of 135° with the horizontal; small circles indicate all possible snapping directions


How to use

  1. Make sure Snap Lock.svg Draft ToggleSnap and Snap Ortho.svg Snap Ortho are turned on.
  2. Choose a Draft tool to draw a shape.
  3. Move the cursor approximately in the direction of a line that makes an angle of 45° with the horizontal.
  4. The snap symbol will appear when the tentative line makes an angle of 45°, or a multiple of it.
  5. Click to attach your new point.
Arrow-left.svg Previous: Draft Center.png Center