Draft Move/sv

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Draft Move and the translation is 10% complete.

Outdated translations are marked like this.
Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎polski • ‎română • ‎русский • ‎svenska • ‎Türkçe
Arrow-left.svg Previous: Draft Label.svg Label
Next: Rotate Draft Rotate.svg Arrow-right.svg

Draft Move.svg Draft Move

Menyplacering
Draft -> Move
Arbetsbänk(ar)
Draft, Arch
Standard genväg
M V
Introducerad i version
-
Se även
None


Beskrivning

Detta verktyg flyttar de markerade objekten från en punkt till en annan. Om inget objekt är valt, så kommer du ombes att välja ett.

The Move tool can be used on 2D shapes created with the Draft Workbench or Sketcher Workbench, but can also be used on many types of 3D objects such as those created with the Part Workbench or Arch Workbench.

To produce various copies in different arrangements use Draft Array, Draft PathArray and Draft PointArray.

Draft Move example.jpg

Moving an object from one point to another point


Bruk

  • Markera punkter i ett tomt område i 3d vyn, eller på ett existerande objekt.
  • Nedtryckning av CTRL kommer att snäppa din punkt till tillgängliga snäpp-punkter.
  • Nedtryckning av SKIFT kommer att begränsa dig vertikalt eller horisontellt i relation till startpunkten.
  • Om du trycker på ESC så avbryts funktionen.
  • Skriv in siffror för att manuellt mata in en koordinat.
  • C växlar kopieringsläget på/av. Med kopiering på, så kommer objekt(en) att kopieras istället för att flyttas.
  • Nedtryckning av ALT kommer att skapa en kopia, även om kopieringsknappen är av.
  • Om ALT är nedtryckt, så kan du göra multipla kopior ända tills ALT släpps.

Limitations

When moving an object that is based on a Sketcher Sketch, for example, a feature created with the PartDesign Workbench (Pad, Revolution, etc.) you must move the original sketch. If you move the derived object, it will just go back to the position defined by the sketch.

Options

  • Press X, Y or Z after a point to constrain the next point on the given axis.
  • To enter coordinates manually, simply enter the numbers, then press Enter between each X, Y and Z component. You can press the Draft AddPoint.svg add point button when you have the desired values to insert the point.
  • Press R or click the checkbox to toggle relative mode. If relative mode is on, the coordinates of the next point are relative to the last one; if not, they are absolute, taken from the origin (0,0,0).
  • Press T or click the checkbox to toggle continue mode. If continue mode is on, the Move tool will restart after you finish the operation, allowing you to move or copy the objects again without pressing the tool button again.
  • Press P or click the checkbox to toggle copy mode. If copy mode is on, the Move tool will keep the original shape in its place but will make a copy at the second point.
You can use both T and P to place several copies in sequence. In this case, the duplicated element is the last placed copy.
  • Hold Alt after the first point to also toggle copy mode. Keeping Alt pressed after clicking on the second point will allow you to continue placing copies; release Alt to finish the operation and see all copies.
  • Hold Ctrl while moving to force snapping your point to the nearest snap location, independently of the distance.
  • Hold Shift while moving to constrain your next point horizontally or vertically in relation to the last one.
  • Press Esc or the Close button to abort the current command; copies already placed will remain.

Scripting

See also: Draft API and FreeCAD Scripting Basics.

The Move tool can be used in macros and from the Python console by using the following function:

movedlist = move(objectslist, vector, copy=False)
  • Moves the base point of the objects in objectslist by the displacement and direction indicated by vector.
    • objectslist is either a single object or a list of objects.
The displacement vector is relative to the base point of the object, which means that if an object is moved 2 units, and then another 2 units, it will have moved 4 units in total from its original position.
  • If copy is True copies are created instead of moving the original objects.
  • movedlist is returned with the original moved objects, or with the new copies.
    • movedlist is either a single object or a list of objects, depending on the input objectslist.

Example:

import FreeCAD, Draft

Polygon1 = Draft.makePolygon(5, radius=1000)
Polygon2 = Draft.makePolygon(3, radius=500)
Polygon3 = Draft.makePolygon(6, radius=220)

Draft.move(Polygon1, FreeCAD.Vector(500, 500, 0))
Draft.move(Polygon1, FreeCAD.Vector(500, 500, 0))
Draft.move(Polygon2, FreeCAD.Vector(1000, -1000, 0))
Draft.move(Polygon3, FreeCAD.Vector(-500, -500, 0))

List1 = [Polygon1, Polygon2, Polygon3]

vector = FreeCAD.Vector(-2000, -2000, 0)
List2 = Draft.move(List1, vector, copy=True)
List3 = Draft.move(List1, -2*vector, copy=True)
Arrow-left.svg Previous: Draft Label.svg Label
Next: Rotate Draft Rotate.svg Arrow-right.svg