Draft CloseLine

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Draft CloseLine and the translation is 11% complete.

Outdated translations are marked like this.
Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎română • ‎русский • ‎svenska • ‎Türkçe
Arrow-left.svg Previous: Draft FinishLine.png Finish line
Next: Undo line Draft UndoLine.png Arrow-right.svg

Draft CloseLine.svg Draft CloseLine

Menyplacering
Draft -> Utilities -> Close Line
Arbetsbänk(ar)
Draft, Arch
Standard genväg
C
Introducerad i version
-
Se även
FinishLine, UndoLine


Description

This command finishes the drawing of a current wire, and closes it by drawing a closing segment between the last point and the first one.

A closed wire can be set to display a filled face if the property DATAMake Face is True.

How to use

  1. Start drawing a Draft Wire.
  2. Press the Draft Lock.svg Close button or press the O key.