Wycinki kodów

From FreeCAD Documentation
This page is a translated version of the page Code snippets and the translation is 100% complete.

Wprowadzenie

Ta strona zawiera przykłady, wycinki, fragmenty kodu FreeCAD python zebrane z doświadczeń użytkowników i dyskusji na forum. Przeczytaj i użyj jako zaczątek swoich własnych skryptów...

Wycinki

Typowy plik InitGui.py

Każdy moduł musi zawierać, oprócz głównego pliku modułu, plik InitGui.py, odpowiedzialny za wstawienie modułu do głównego GUI. Oto przykład najprostszego z nich.

class ScriptWorkbench (Workbench): 
    MenuText = "Scripts"
    def Initialize(self):
        import Scripts # assuming Scripts.py is your module
        list = ["Script_Cmd"] # That list must contain command names, that can be defined in Scripts.py
        self.appendToolbar("My Scripts",list) 
        
Gui.addWorkbench(ScriptWorkbench())

Przewiń na górę strony

Typowy plik modułu

To jest przykład głównego pliku modułu, zawierającego wszystko, co robi moduł. Jest to plik Scripts.py wywołany przez poprzedni przykład. Można tu umieścić wszystkie niestandardowe polecenia.

import FreeCAD, FreeCADGui 
 
class ScriptCmd: 
   def Activated(self): 
       # Here your write what your ScriptCmd does...
       FreeCAD.Console.PrintMessage('Hello, World!')
   def GetResources(self): 
       return {'Pixmap' : 'path_to_an_icon/myicon.png', 'MenuText': 'Short text', 'ToolTip': 'More detailed text'} 
       
FreeCADGui.addCommand('Script_Cmd', ScriptCmd())

Przewiń na górę strony

Import nowego typu pliku

Tworzenie importera dla nowego typu pliku w FreeCAD jest łatwe. FreeCAD nie uważa, że importujesz dane w otwartym dokumencie, ale raczej, że możesz po prostu bezpośrednio otworzyć nowy typ pliku. To, co musisz zrobić, to dodać nowe rozszerzenie pliku do listy znanych rozszerzeń FreeCAD i napisać kod, który odczyta plik i utworzy żądane obiekty FreeCAD:

Ten wiersz musi zostać dodany do pliku InitGui.py, aby dodać nowe rozszerzenie pliku do listy:

# Assumes Import_Ext.py is the file that has the code for opening and reading .ext files
FreeCAD.addImportType("Your new File Type (*.ext)","Import_Ext")

Następnie w pliku Import_Ext.py:

def open(filename): 
   doc=App.newDocument()
   # here you do all what is needed with filename, read, classify data, create corresponding FreeCAD objects
   doc.recompute()

Eksportowanie dokumentu do nowego typu pliku działa w ten sam sposób, z wyjątkiem tego, że używasz:

FreeCAD.addExportType("Twój nowy typ pliku (*.ext)", "Export_Ext")

Przewiń na górę strony

Dodanie linii

Linia ma po prostu 2 punkty.

import Part,PartGui 
doc=App.activeDocument() 
# add a line element to the document and set its points 
l=Part.LineSegment()
l.StartPoint=(0.0,0.0,0.0)
l.EndPoint=(1.0,1.0,1.0)
doc.addObject("Part::Feature","Line").Shape=l.toShape() 
doc.recompute()

Przewiń na górę strony

Dodanie wielokąta

Wielokąt to po prostu zestaw połączonych segmentów linii (polilinia w programie AutoCAD). Nie musi on być zamknięty.

import Part, PartGui 
doc = App.activeDocument()
n = list() 

# create a 3D vector, set its coordinates and add it to the list 
v = App.Vector(0,0,0) 
n.append(v) 
v = App.Vector(10,0,0) 
n.append(v) 
#... repeat for all nodes 

# Create a polygon object and set its nodes 
p = doc.addObject("Part::Polygon","Polygon") 
p.Nodes = n 
doc.recompute()

Przewiń na górę strony

Dodawanie i usuwanie obiektu z grupy

doc=App.activeDocument() 
grp=doc.addObject("App::DocumentObjectGroup", "Group") 
lin=doc.addObject("Part::Feature", "Line")
grp.addObject(lin) # adds the lin object to the group grp
grp.removeObject(lin) # removes the lin object from the group grp

Uwaga: Możesz nawet dodać inne grupy do grupy...

Przewiń na górę strony

Dodanie siatki

import Mesh
doc=App.activeDocument()
# create a new empty mesh
m = Mesh.Mesh()
# build up box out of 12 facets
m.addFacet(0.0,0.0,0.0, 0.0,0.0,1.0, 0.0,1.0,1.0)
m.addFacet(0.0,0.0,0.0, 0.0,1.0,1.0, 0.0,1.0,0.0)
m.addFacet(0.0,0.0,0.0, 1.0,0.0,0.0, 1.0,0.0,1.0)
m.addFacet(0.0,0.0,0.0, 1.0,0.0,1.0, 0.0,0.0,1.0)
m.addFacet(0.0,0.0,0.0, 0.0,1.0,0.0, 1.0,1.0,0.0)
m.addFacet(0.0,0.0,0.0, 1.0,1.0,0.0, 1.0,0.0,0.0)
m.addFacet(0.0,1.0,0.0, 0.0,1.0,1.0, 1.0,1.0,1.0)
m.addFacet(0.0,1.0,0.0, 1.0,1.0,1.0, 1.0,1.0,0.0)
m.addFacet(0.0,1.0,1.0, 0.0,0.0,1.0, 1.0,0.0,1.0)
m.addFacet(0.0,1.0,1.0, 1.0,0.0,1.0, 1.0,1.0,1.0)
m.addFacet(1.0,1.0,0.0, 1.0,1.0,1.0, 1.0,0.0,1.0)
m.addFacet(1.0,1.0,0.0, 1.0,0.0,1.0, 1.0,0.0,0.0)
# scale to a edge langth of 100
m.scale(100.0)
# add the mesh to the active document
me=doc.addObject("Mesh::Feature","Cube")
me.Mesh=m

Przewiń na górę strony

Dodanie łuku lub okręgu

import Part
doc = App.activeDocument()
c = Part.Circle() 
c.Radius=10.0  
f = doc.addObject("Part::Feature", "Circle") # create a document with a circle feature 
f.Shape = c.toShape() # Assign the circle shape to the shape property 
doc.recompute()

Przewiń na górę strony

Uzyskanie dostępu i zmiana reprezentację obiektu

Każdy obiekt w dokumencie FreeCAD ma powiązany obiekt reprezentacji widoku, który przechowuje wszystkie parametry definiujące sposób wyświetlania tego obiektu: tj. kolor, szerokość linii itp. Zobacz także fragment poniżej Lista komponentów obiektu.

gad = Gui.activeDocument() # access the active document containing all 
                           # view representations of the features in the
                           # corresponding App document 

v = gad.getObject("Cube")  # access the view representation to the Mesh feature 'Cube' 
v.ShapeColor               # prints the color to the console 
v.ShapeColor=(1.0,1.0,1.0) # sets the shape color to white

Przewiń na górę strony

Zamień formę myszy na jeden obraz

import PySide2
from PySide2 import QtCore, QtGui, QtWidgets
from PySide2.QtWidgets import QApplication
from PySide2.QtGui import QColor, QPixmap, QImage, QPainter, QCursor
from PySide2.QtCore import Qt

myImage = QtGui.QPixmap("Complete_Path_to_image.bmp")
cursor = QtGui.QCursor(myImage)
QtWidgets.QApplication.setOverrideCursor(QtGui.QCursor(cursor))

Przewiń na górę strony

Zastąp formę myszy jednym obrazem (krzyżykiem)

Obraz jest tworzony przez program Gimp i eksportowany do pliku .XPM. Skopiuj i użyj kodu między nawiasami klamrowymi "{", aby skopiować "}"'.

import PySide2
from PySide2 import QtCore, QtGui, QtWidgets
from PySide2.QtWidgets import QApplication
from PySide2.QtGui import QColor, QPixmap, QImage, QPainter, QCursor
from PySide2.QtCore import Qt

cross32x32Icon = [
"32 32 2 1",
" 	c None",
".	c #FF0000",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                                ",
"............... . ..............",
"                                ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               ",
"                .               "
]

myImage = QtGui.QPixmap(cross32x32Icon)
cursor = QtGui.QCursor(myImage)
QtWidgets.QApplication.setOverrideCursor(QtGui.QCursor(cursor))

Przewiń na górę strony

Obserwowanie zmiany kamery w przeglądarce 3D dzięki Python

Można to zrobić, dodając do kamery czujnik Node Sensor:

from pivy import coin
def callback(*args):
    cam, sensor = args
    print()
    print("Cam position : {}".format(cam.position.getValue().getValue()))
    print("Cam rotation : {}".format(cam.orientation.getValue().getValue()))

camera_node = Gui.ActiveDocument.ActiveView.getCameraNode()
node_sensor = coin.SoNodeSensor(callback, camera_node)
node_sensor.attach(camera_node)

Przewiń na górę strony

Obserwowanie zdarzeń myszy w przeglądarce 3D za pomocą środowiska Python

Framework Inventor pozwala na dodanie jednego lub więcej węzłów wywołania zwrotnego do scenorysu przeglądarki. Domyślnie w FreeCAD jeden węzeł wywołania zwrotnego jest zainstalowany na przeglądarkę, co pozwala na dodanie globalnych lub statycznych funkcji C++. W odpowiednim wiązaniu Python dostępne są pewne metody umożliwiające wykorzystanie tej techniki z poziomu kodu Python.

App.newDocument()
v=Gui.activeDocument().activeView()
 
#This class logs any mouse button events. As the registered callback function fires twice for 'down' and
#'up' events we need a boolean flag to handle this.
class ViewObserver:
   def logPosition(self, info):
       down = (info["State"] == "DOWN")
       pos = info["Position"]
       if (down):
           FreeCAD.Console.PrintMessage("Clicked on position: ("+str(pos[0])+", "+str(pos[1])+")\n")
       
o = ViewObserver()
c = v.addEventCallback("SoMouseButtonEvent",o.logPosition)


Teraz wybierz miejsce na powierzchni w przeglądarce 3D i obserwuj komunikaty w oknie wyjściowym. Aby zakończyć obserwację wystarczy wywołać:

v.removeEventCallback("SoMouseButtonEvent",c)

Obsługiwane są następujące typy zdarzeń:

  • SoEvent -- wszystkie rodzaje zdarzeń,
  • SoButtonEvent -- wszystkie zdarzenia przycisków myszy i klawiszy,
  • SoLocation2Event -- zdarzenia ruchu 2D (zwykle ruchy myszą),
  • SoMotion3Event - zdarzenia ruchu 3D (zwykle ruchy spaceball),
  • SoKeyboardEvent -- zdarzenia klawiszy w dół i w górę,
  • SoMouseButtonEvent -- zdarzenia przycisków myszy w dół i w górę,
  • SoSpaceballButtonEvent -- zdarzenia w dół i w górę przycisku spaceball.

Funkcja Python, którą można zarejestrować za pomocą addEventCallback(), oczekuje słownika. W zależności od obserwowanego zdarzenia słownik może zawierać różne klucze.

Dla wszystkich zdarzeń zawiera klucze:

  • Type -- nazwa typu zdarzenia tj. SoMouseEvent, SoLocation2Event, ...
  • Time -- aktualny czas jako ciąg znaków,
  • Position -- krotka dwóch liczb całkowitych, pozycja kursora myszki,
  • ShiftDown -- wartość logiczna, Prawda jeśli wciśnięto Shift, w przeciwnym razie Fałsz,
  • CtrlDown -- wartość logiczna, Prawda jeśli wciśnięto Ctrl, w przeciwnym wypadku Fałsz,
  • AltDown -- wartość logiczna, Prawda jeśli naciśnięto Alt, w przeciwnym razie Fałsz.

Dla wszystkich zdarzeń przycisków, tj. zdarzeń klawiatury, myszki lub spaceball

  • State - Ciąg znaków "UP", jeśli przycisk był w górze, "DOWN", jeśli był w dół lub "UNKNOWN" dla wszystkich innych przypadków.

Dla zdarzeń klawiatury:

  • Key -- znak naciśniętego klawisza

Dla zdarzeń przycisku myszki

  • Button - naciśnięty przycisk, może być BUTTON1, ..., BUTTON5 lub DOWOLNY

Dla zdarzeń spaceball:

  • Button -- Naciśnięty przycisk, może być BUTTON1, ..., BUTTON7 lub ANY

I wreszcie zdarzenia ruchu:

  • Translation - krotka trzech liczb zmiennoprzecinkowych
  • Rotation - kwaternion dla obrotu, tj. krotka czterech zmiennych.

Przewiń na górę strony

Wyświetlanie naciśniętych klawiszy i poleceń zdarzeń

Makrodefinicja ta wyświetla w widoku raportu naciśnięte klawisze i wszystkie polecenia zdarzeń:

App.newDocument()
v=Gui.activeDocument().activeView()
class ViewObserver:
   def logPosition(self, info):
       try:
           down = (info["Key"])
           FreeCAD.Console.PrintMessage(str(down)+"\n") # here the character pressed
           FreeCAD.Console.PrintMessage(str(info)+"\n") # list all events command
           FreeCAD.Console.PrintMessage("_______________________________________"+"\n")
       except Exception:
           None
 
o = ViewObserver()
c = v.addEventCallback("SoEvent",o.logPosition)

#v.removeEventCallback("SoEvent",c) # remove ViewObserver

Przewiń na górę strony

Manipulowanie scenografem w Python

Możliwe jest również pobieranie i zmienianie scenegrafu w środowisku Python, za pomocą modułu "pivy" - powiązania Python dla Coin.

from pivy.coin import *                # load the pivy module
view = Gui.ActiveDocument.ActiveView   # get the active viewer
root = view.getSceneGraph()            # the root is an SoSeparator node
root.addChild(SoCube())
view.fitAll()

Python API pivy jest tworzone za pomocą narzędzia SWIG. Ponieważ we FreeCAD używamy samodzielnie napisanych węzłów, nie można ich tworzyć bezpośrednio w Python. Możliwe jest jednak utworzenie węzła według jego wewnętrznej nazwy. Instancję typu "SoFCSelection" można utworzyć za pomocą:

type = SoType.fromName("SoFCSelection")
node = type.createInstance()

Przewiń na górę strony

Dodawanie i usuwanie obiektów do / z scenografu

W ten sposób można dodawać nowe węzły do scenografu. Należy zawsze dodawać SoSeparator, aby zawierał geometrię, współrzędne i informacje o materiale tego samego obiektu. Poniższy przykład dodaje czerwoną linię od (0,0,0) do (10,0,0):

from pivy import coin
sg = Gui.ActiveDocument.ActiveView.getSceneGraph()
co = coin.SoCoordinate3()
pts = [[0,0,0],[10,0,0]]
co.point.setValues(0,len(pts),pts)
ma = coin.SoBaseColor()
ma.rgb = (1,0,0)
li = coin.SoLineSet()
li.numVertices.setValue(2)
no = coin.SoSeparator()
no.addChild(co)
no.addChild(ma)
no.addChild(li)
sg.addChild(no)

Aby go usunąć, wystarczy wydać polecenie:

sg.removeChild(no)

Przewiń na górę strony

===Zapisz sceneGraph w 3 seriach po 36 plików===.

Wyświetl fragment kodu, rozwijając tę sekcję:

import math
import time
from FreeCAD import Base
from pivy import coin

size=(1000,1000)
dirname = "C:/Temp/animation/"
steps=36
angle=2*math.pi/steps

matX=Base.Matrix()
matX.rotateX(angle)
stepsX=Base.Placement(matX).Rotation

matY=Base.Matrix()
matY.rotateY(angle)
stepsY=Base.Placement(matY).Rotation

matZ=Base.Matrix()
matZ.rotateZ(angle)
stepsZ=Base.Placement(matZ).Rotation

view=Gui.ActiveDocument.ActiveView
cam=view.getCameraNode()
rotCamera=Base.Rotation(*cam.orientation.getValue().getValue())

# this sets the lookat point to the center of circumsphere of the global bounding box
view.fitAll()

# the camera's position, i.e. the user's eye point
position=Base.Vector(*cam.position.getValue().getValue())
distance=cam.focalDistance.getValue()

# view direction
vec=rotCamera.multVec(Base.Vector(0,0,-1))

# this is the point on the screen the camera looks at
# when rotating the camera we should make this point fix
lookat=position+vec*distance

# around x axis
for i in range(steps):
    rotCamera=stepsX.multiply(rotCamera)
    cam.orientation.setValue(*rotCamera.Q)
    vec=rotCamera.multVec(Base.Vector(0,0,-1))
    pos=lookat-vec*distance
    cam.position.setValue(pos.x,pos.y,pos.z)
    Gui.updateGui()
    time.sleep(0.3)
    view.saveImage(dirname+"x-%d.png" % i,*size)

# around y axis
for i in range(steps):
    rotCamera=stepsY.multiply(rotCamera)
    cam.orientation.setValue(*rotCamera.Q)
    vec=rotCamera.multVec(Base.Vector(0,0,-1))
    pos=lookat-vec*distance
    cam.position.setValue(pos.x,pos.y,pos.z)
    Gui.updateGui()
    time.sleep(0.3)
    view.saveImage(dirname+"y-%d.png" % i,*size)

# around z axis
for i in range(steps):
    rotCamera=stepsZ.multiply(rotCamera)
    cam.orientation.setValue(*rotCamera.Q)
    vec=rotCamera.multVec(Base.Vector(0,0,-1))
    pos=lookat-vec*distance
    cam.position.setValue(pos.x,pos.y,pos.z)
    Gui.updateGui()
    time.sleep(0.3)
    view.saveImage(dirname+"z-%d.png" % i,*size)

Przewiń na górę strony

Dodaj niestandardowe widżety do interfejsu

Możesz tworzyć niestandardowe widżety za pomocą Qt Designer, przekształcać je w skrypt Python, a następnie ładować je do interfejsu FreeCAD za pomocą PySide.

Kod Python wygenerowany przez kompilator Ui Python (narzędzie, które konwertuje pliki qt-designer .ui na kod Pythona) generalnie wygląda tak (jest prosty, można go również zakodować bezpośrednio w Python):

class myWidget_Ui(object):
    def setupUi(self, myWidget):
        myWidget.setObjectName("my Nice New Widget")
        myWidget.resize(QtCore.QSize(QtCore.QRect(0,0,300,100).size()).expandedTo(myWidget.minimumSizeHint())) # sets size of the widget
 
        self.label = QtGui.QLabel(myWidget) # creates a label
        self.label.setGeometry(QtCore.QRect(50,50,200,24)) # sets its size
        self.label.setObjectName("label") # sets its name, so it can be found by name

    def retranslateUi(self, draftToolbar): # built-in QT function that manages translations of widgets
        myWidget.setWindowTitle(QtGui.QApplication.translate("myWidget", "My Widget", None, QtGui.QApplication.UnicodeUTF8))
        self.label.setText(QtGui.QApplication.translate("myWidget", "Welcome to my new widget!", None, QtGui.QApplication.UnicodeUTF8))

Następnie wystarczy utworzyć odniesienie do okna FreeCAD Qt, wstawić do niego niestandardowy widżet i "przekształcić" ten widżet w swój za pomocą kodu interfejsu użytkownika, który właśnie utworzyliśmy:

app = QtGui.qApp
FCmw = app.activeWindow() # the active qt window, = the freecad window since we are inside it
# FCmw = FreeCADGui.getMainWindow() # use this line if the 'addDockWidget' error is declared
myNewFreeCADWidget = QtGui.QDockWidget() # create a new dckwidget
myNewFreeCADWidget.ui = myWidget_Ui() # load the Ui script
myNewFreeCADWidget.ui.setupUi(myNewFreeCADWidget) # setup the ui
FCmw.addDockWidget(QtCore.Qt.RightDockWidgetArea,myNewFreeCADWidget) # add the widget to the main window

Przewiń na górę strony

Dodaj zakładkę do widoku Złożonego

Poniższy kod umożliwia dodanie zakładki do widoku Złozonego, oddzielnej od istniejących wcześniej zakładek "Model" i "Zadania". Wykorzystuje on również moduł uic do załadowania pliku interfejsu użytkownika bezpośrednio w tej zakładce.

# create new Tab in ComboView
from PySide import QtGui,QtCore
#from PySide import uic

def getMainWindow():
   "returns the main window"
   # using QtGui.qApp.activeWindow() isn't very reliable because if another
   # widget than the mainwindow is active (e.g. a dialog) the wrong widget is
   # returned
   toplevel = QtGui.qApp.topLevelWidgets()
   for i in toplevel:
       if i.metaObject().className() == "Gui::MainWindow":
           return i
   raise Exception("No main window found")

def getComboView(mw):
   dw=mw.findChildren(QtGui.QDockWidget)
   for i in dw:
       if str(i.objectName()) == "Combo View":
           return i.findChild(QtGui.QTabWidget)
       elif str(i.objectName()) == "Python Console":
           return i.findChild(QtGui.QTabWidget)
   raise Exception ("No tab widget found")

mw = getMainWindow()
tab = getComboView(getMainWindow())
tab2=QtGui.QDialog()
tab.addTab(tab2,"A Special Tab")

#uic.loadUi("/myTaskPanelforTabs.ui",tab2)
tab2.show()
#tab.removeTab(2)

Przewiń na górę strony

Włącz lub wyłącz okno

Skrypt ten daje możliwość manipulowania interfejsem użytkownika z konsoli Python, aby pokazać/ukryć różne komponenty w interfejsie FreeCAD, takie jak:

from PySide import QtGui
mw = FreeCADGui.getMainWindow()
dws = mw.findChildren(QtGui.QDockWidget)

# objectName may be :
# "Report view"
# "Tree view"
# "Property view"
# "Selection view"
# "Combo View"
# "Python console"
# "draftToolbar"

for i in dws:
  if i.objectName() == "Report view":
    dw = i
    break

va = dw.toggleViewAction()
va.setChecked(True)        # True or False
dw.setVisible(True)        # True or False

Przewiń na górę strony

Otwórz niestandardową stronę internetową

import WebGui
WebGui.openBrowser("http://www.example.com")

Przewiń na górę strony

Pobierz zawartość HTML otwartej strony internetowej

from PySide import QtGui,QtWebKit
a = QtGui.qApp
mw = a.activeWindow()
v = mw.findChild(QtWebKit.QWebFrame)
html = unicode(v.toHtml())
print( html)

Przewiń na górę strony

Pobieranie współrzędnych 3 wybranych punktów lub obiektów

# -*- coding: utf-8 -*-
# the line above to put the accentuated in the remarks
# If this line is missing, an error will be returned
# extract and use the coordinates of 3 objects selected
import Part, FreeCAD, math, PartGui, FreeCADGui
from FreeCAD import Base, Console
sel = FreeCADGui.Selection.getSelection() # " sel " contains the items selected
if len(sel)!=3 :
  # If there are no 3 objects selected, an error is displayed in the report view
  # The \r and \n at the end of line mean return and the newline CR + LF.
  Console.PrintError("Select 3 points exactly\r\n")
else :
  points=[]
  for obj in sel:
    points.append(obj.Shape.BoundBox.Center)

  for pt in points:
    # display of the coordinates in the report view
    Console.PrintMessage(str(pt.x)+"\r\n")
    Console.PrintMessage(str(pt.y)+"\r\n")
    Console.PrintMessage(str(pt.z)+"\r\n")

  Console.PrintMessage(str(pt[1]) + "\r\n")

Przewiń na górę strony

Lista wszystkich obiektów

# -*- coding: utf-8 -*-
import FreeCAD,Draft
# List all objects of the document
doc = FreeCAD.ActiveDocument
objs = FreeCAD.ActiveDocument.Objects
#App.Console.PrintMessage(str(objs) + "\n")
#App.Console.PrintMessage(str(len(FreeCAD.ActiveDocument.Objects)) + " Objects"  + "\n")

for obj in objs:
    a = obj.Name                                             # list the Name  of the object  (not modifiable)
    b = obj.Label                                            # list the Label of the object  (modifiable)
    try:
        c = obj.LabelText                                    # list the LabeText of the text (modifiable)
        App.Console.PrintMessage(str(a) +" "+ str(b) +" "+ str(c) + "\n") # Displays the Name the Label and the text
    except:
        App.Console.PrintMessage(str(a) +" "+ str(b) + "\n") # Displays the Name and the Label of the object

#doc.removeObject("Box") # Clears the designated object

Przewiń na górę strony

Lista wymiarów obiektu, biorąc pod uwagę jego nazwę=

for edge in FreeCAD.ActiveDocument.MyObjectName.Shape.Edges: # replace "MyObjectName" for list
    print( edge.Length)

Przewiń na górę strony

Funkcja rezydentna z akcją kliknięcia myszką

Tutaj z SelObserver na wybranym obiekcie:

# -*- coding: utf-8 -*-
# causes an action to the mouse click on an object
# This function remains resident (in memory) with the function "addObserver(s)"
# "removeObserver(s) # Uninstalls the resident function
class SelObserver:
    def setPreselection(self,doc,obj,sub):                # Preselection object
        App.Console.PrintMessage(str(sub)+ "\n")          # The part of the object name

    def addSelection(self,doc,obj,sub,pnt):               # Selection object
        App.Console.PrintMessage("addSelection"+ "\n")
        App.Console.PrintMessage(str(doc)+ "\n")          # Name of the document
        App.Console.PrintMessage(str(obj)+ "\n")          # Name of the object
        App.Console.PrintMessage(str(sub)+ "\n")          # The part of the object name
        App.Console.PrintMessage(str(pnt)+ "\n")          # Coordinates of the object
        App.Console.PrintMessage("______"+ "\n")

    def removeSelection(self,doc,obj,sub):                # Remove the selection
        App.Console.PrintMessage("removeSelection"+ "\n")

    def setSelection(self,doc):                           # Set selection
        App.Console.PrintMessage("setSelection"+ "\n")

    def clearSelection(self,doc):                         # If click on the screen, clear the selection
        App.Console.PrintMessage("clearSelection"+ "\n")  # If click on another object, clear the previous object
s =SelObserver()
FreeCADGui.Selection.addObserver(s)                       # install the function mode resident
#FreeCADGui.Selection.removeObserver(s)                   # Uninstall the resident function

Inny przykład z ViewObserver na wybranym obiekcie lub widoku:

App.newDocument()
v=Gui.activeDocument().activeView()
 
#This class logs any mouse button events. As the registered callback function fires twice for 'down' and
#'up' events we need a boolean flag to handle this.
class ViewObserver:
   def __init__(self, view):
       self.view = view
   
   def logPosition(self, info):
       down = (info["State"] == "DOWN")
       pos = info["Position"]
       if (down):
           FreeCAD.Console.PrintMessage("Clicked on position: ("+str(pos[0])+", "+str(pos[1])+")\n")
           pnt = self.view.getPoint(pos)
           FreeCAD.Console.PrintMessage("World coordinates: " + str(pnt) + "\n")
           info = self.view.getObjectInfo(pos)
           FreeCAD.Console.PrintMessage("Object info: " + str(info) + "\n")

o = ViewObserver(v)
c = v.addEventCallback("SoMouseButtonEvent",o.logPosition)

Przewiń na górę strony

Wyświetlanie aktywnego dokumentu

class DocObserver:                      # document Observer
    def slotActivateDocument(self,doc):
        print(doc.Name)

obs=DocObserver()
App.addDocumentObserver(obs)
#App.removeDocumentObserver(obs)                 # desinstalle la fonction residente

Aby usunąć obserwatora należy wywołać:

App.removeDocumentObserver(obs)                 # desinstalle la fonction residente

Przewiń na górę strony

Znajdź / wybierz wszystkie elementy poniżej kursora

from pivy import coin
import FreeCADGui

def mouse_over_cb( event_callback):
    event = event_callback.getEvent()
    pos = event.getPosition().getValue()
    listObjects = FreeCADGui.ActiveDocument.ActiveView.getObjectsInfo((int(pos[0]),int(pos[1])))
    obj = []
    if listObjects:
        FreeCAD.Console.PrintMessage("\n *** Objects under mouse pointer ***")
        for o in listObjects:
            label = str(o["Object"])
            if not label in obj:
                obj.append(label)
        FreeCAD.Console.PrintMessage("\n"+str(obj))


view = FreeCADGui.ActiveDocument.ActiveView

mouse_over = view.addEventCallbackPivy( coin.SoLocation2Event.getClassTypeId(), mouse_over_cb )

# to remove Callback :
#view.removeEventCallbackPivy( coin.SoLocation2Event.getClassTypeId(), mouse_over)

####
#The easy way is probably to use FreeCAD's selection.
#FreeCADGui.ActiveDocument.ActiveView.getObjectsInfo(mouse_coords)

####
#you get that kind of result :
#'Document': 'Unnamed', 'Object': 'Box', 'Component': 'Face2', 'y': 8.604081153869629, 'x': 21.0, 'z': 8.553047180175781

####
#You can use this data to add your element to FreeCAD's selection :
#FreeCADGui.Selection.addSelection(FreeCAD.ActiveDocument.Box,'Face2',21.0,8.604081153869629,8.553047180175781)

Przewiń na górę strony

Lista komponentów obiektu

Ta funkcja wyświetla listę składników obiektu i wyodrębnia:

  • ten obiekt jego współrzędne XYZ,
  • jego krawędzie i ich długości, środek masy i współrzędne,
  • jego powierzchnie i ich środek masy,
  • jego ściany i ich powierzchnie oraz współrzędne.
# -*- coding: utf-8 -*-
# This function list the components of an object
# and extract this object its XYZ coordinates,
# its edges and their lengths center of mass and coordinates
# its faces and their center of mass
# its faces and their surfaces and coordinates
# 8/05/2014

import Draft,Part
def detail():
    sel = FreeCADGui.Selection.getSelection()   # Select an object
    if len(sel) != 0:                           # If there is a selection then
        Vertx=[]
        Edges=[]
        Faces=[]
        compt_V=0
        compt_E=0
        compt_F=0
        pas    =0
        perimetre = 0.0   
        EdgesLong = []

        # Displays the "Name" and the "Label" of the selection
        App.Console.PrintMessage("Selection > " + str(sel[0].Name) + "  " + str(sel[0].Label) +"\n"+"\n")

        for j in enumerate(sel[0].Shape.Edges):                                     # Search the "Edges" and their lengths
            compt_E+=1
            Edges.append("Edge%d" % (j[0]+1))
            EdgesLong.append(str(sel[0].Shape.Edges[compt_E-1].Length))
            perimetre += (sel[0].Shape.Edges[compt_E-1].Length)                     # calculates the perimeter

            # Displays the "Edge" and its length
            App.Console.PrintMessage("Edge"+str(compt_E)+" Length > "+str(sel[0].Shape.Edges[compt_E-1].Length)+"\n")

            # Displays the "Edge" and its center mass
            App.Console.PrintMessage("Edge"+str(compt_E)+" Center > "+str(sel[0].Shape.Edges[compt_E-1].CenterOfMass)+"\n")

            num = sel[0].Shape.Edges[compt_E-1].Vertexes[0]
            Vertx.append("X1: "+str(num.Point.x))
            Vertx.append("Y1: "+str(num.Point.y))
            Vertx.append("Z1: "+str(num.Point.z))
            # Displays the coordinates 1
            App.Console.PrintMessage("X1: "+str(num.Point[0])+" Y1: "+str(num.Point[1])+" Z1: "+str(num.Point[2])+"\n")

            try:
                num = sel[0].Shape.Edges[compt_E-1].Vertexes[1]
                Vertx.append("X2: "+str(num.Point.x))
                Vertx.append("Y2: "+str(num.Point.y))
                Vertx.append("Z2: "+str(num.Point.z))
            except:
                Vertx.append("-")
                Vertx.append("-")
                Vertx.append("-")
            # Displays the coordinates 2
            App.Console.PrintMessage("X2: "+str(num.Point[0])+" Y2: "+str(num.Point[1])+" Z2: "+str(num.Point[2])+"\n")

            App.Console.PrintMessage("\n")
        App.Console.PrintMessage("Perimeter of the form  : "+str(perimetre)+"\n") 

        App.Console.PrintMessage("\n")
        FacesSurf = []
        for j in enumerate(sel[0].Shape.Faces):                                      # Search the "Faces" and their surface
            compt_F+=1
            Faces.append("Face%d" % (j[0]+1))
            FacesSurf.append(str(sel[0].Shape.Faces[compt_F-1].Area))

            # Displays 'Face' and its surface
            App.Console.PrintMessage("Face"+str(compt_F)+" >  Surface "+str(sel[0].Shape.Faces[compt_F-1].Area)+"\n")

            # Displays 'Face' and its CenterOfMass
            App.Console.PrintMessage("Face"+str(compt_F)+" >  Center  "+str(sel[0].Shape.Faces[compt_F-1].CenterOfMass)+"\n")

            # Displays 'Face' and its Coordinates
            FacesCoor = []
            fco = 0
            for f0 in sel[0].Shape.Faces[compt_F-1].Vertexes:                        # Search the Vertexes of the face
                fco += 1
                FacesCoor.append("X"+str(fco)+": "+str(f0.Point.x))
                FacesCoor.append("Y"+str(fco)+": "+str(f0.Point.y))
                FacesCoor.append("Z"+str(fco)+": "+str(f0.Point.z))

            # Displays 'Face' and its Coordinates
            App.Console.PrintMessage("Face"+str(compt_F)+" >  Coordinate"+str(FacesCoor)+"\n")

            # Displays 'Face' and its Volume
            App.Console.PrintMessage("Face"+str(compt_F)+" >  Volume  "+str(sel[0].Shape.Faces[compt_F-1].Volume)+"\n")
            App.Console.PrintMessage("\n")

        # Displays the total surface of the form
        App.Console.PrintMessage("Surface of the form    : "+str(sel[0].Shape.Area)+"\n")

        # Displays the total Volume of the form
        App.Console.PrintMessage("Volume  of the form    : "+str(sel[0].Shape.Volume)+"\n")

detail()

Przewiń na górę strony

Lista właściwości PropertiesList

import FreeCADGui
from FreeCAD import Console
o = App.ActiveDocument.ActiveObject
op = o.PropertiesList
for p in op:
    Console.PrintMessage("Property: "+ str(p)+ " Value: " + str(o.getPropertyByName(p))+"\r\n")

Przewiń na górę strony

Dodaj pojedynczy komentarz właściwości

import Draft
obj = FreeCADGui.Selection.getSelection()[0]
obj.addProperty("App::PropertyString","GComment","Draft","Font name").GComment = "Comment here"
App.activeDocument().recompute()

Przewiń na górę strony

Wyszukiwanie i ekstrakcja danych

Przykłady badania i dekodowania informacji o obiekcie.

Każda sekcja jest niezależnie i jest oddzielona przez ciąg znaków "############" może być skopiowana bezpośrednio do konsoli Python, makrodefinicji lub używać tą makrodefinicją. Opis makrodefinicji w komentarzu.

Wyświetlanie w oknie "Widok raportu" (Widok → Panele → Widok raportu).

# -*- coding: utf-8 -*-
from __future__ import unicode_literals
 
# Exemples de recherche et de decodage d'informations sur un objet
# Chaque section peut etre copiee directement dans la console Python ou dans une macro ou utilisez la macro tel quel
# Certaines commandes se repetent seul l'approche est differente
# L'affichage se fait dans la Vue rapport : Menu Affichage > Vues > Vue rapport
#
# Examples of research and decoding information on an object
# Each section can be copied directly into the Python console, or in a macro or uses this macro
# Certain commands as repeat alone approach is different
# Displayed in Report view: View > Views > report view
#
# rev:30/08/2014:29/09/2014:17/09/2015 22/11/2019 30/12/2022
 
from FreeCAD import Base
import DraftVecUtils, Draft, Part

##################################################################################
# info in the object

box = App.ActiveDocument.getObject('Box')                                 # object 
####
print(dir(box))                                                           # all options disponible in the object
####
print(box.Name)                                                           # object name
####
print(box.Content)                                                        # content of the object in XML format
##################################################################################
#
# example of using the information listed
#
# search the name of the active document 
mydoc = FreeCAD.activeDocument().Name                                     # Name of active Document
App.Console.PrintMessage("Active docu    : "+(mydoc)+"\n")
##################################################################################

# search the document name and the name of the object selected
sel = FreeCADGui.Selection.getSelection()                                 # select object with getSelection()
object_FullName = sel[0].FullName                                         # file Name and Name of the object selected
App.Console.PrintMessage("object_FullName: "+(object_FullName)+"\n")
##################################################################################

# search the label of the object selected
sel = FreeCADGui.Selection.getSelection()                                 # select object with getSelection()
object_Label = sel[0].Label                                               # Label of the object (modifiable)
App.Console.PrintMessage("object_Label   : "+(object_Label)+"\n")
##################################################################################

#TypeID object FreeCAD selected
sel = FreeCADGui.Selection.getSelection()                                 # select object with getSelection()
App.Console.PrintMessage("sel            : "+str(sel[0])+"\n\n")          # sel[0] first object selected
##################################################################################

# search the Name of the object selected
sel = FreeCADGui.Selection.getSelection()                                 # select object with getSelection()
object_Name  = sel[0].Name                                                # Name of the object (not modifiable)
App.Console.PrintMessage("object_Name    : "+str(object_Name)+"\n\n")
##################################################################################

# search the Sub Element Name of the sub object selected
try:
    SubElement = FreeCADGui.Selection.getSelectionEx()                    # sub element name with getSelectionEx()
    element_ = SubElement[0].SubElementNames[0]                           # name of 1 element selected
    App.Console.PrintMessage("elementSelec   : "+str(element_)+"\n\n")            
except:
    App.Console.PrintMessage("Oups"+"\n\n")            
##################################################################################

# give the length of the subObject selected
SubElementLength = Gui.Selection.getSelectionEx()[0].SubObjects[0].Length # sub element or element name with getSelectionEx()
App.Console.PrintMessage("SubElement length: "+str(SubElementLength)+"\n")# length
##################################################################################

# list the edges and the coordinates of the object[0] selected
sel = FreeCADGui.Selection.getSelection()                                 # select object with getSelection()
i = 0
for j in enumerate(sel[0].Shape.Edges):                                   # list all Edges
    i += 1
    App.Console.PrintMessage("Edges n : "+str(i)+"\n")
    a = sel[0].Shape.Edges[j[0]].Vertexes[0]
    App.Console.PrintMessage("X1             : "+str(a.Point.x)+"\n")     # coordinate XYZ first point
    App.Console.PrintMessage("Y1             : "+str(a.Point.y)+"\n")     #
    App.Console.PrintMessage("Z1             : "+str(a.Point.z)+"\n")     #
    try:
        a = sel[0].Shape.Edges[j[0]].Vertexes[1]
        App.Console.PrintMessage("X2             : "+str(a.Point.x)+"\n") # coordinate XYZ second point
        App.Console.PrintMessage("Y2             : "+str(a.Point.y)+"\n") #
        App.Console.PrintMessage("Z2             : "+str(a.Point.z)+"\n") #
    except:
        App.Console.PrintMessage("Oups"+"\n")    
App.Console.PrintMessage("\n")    
##################################################################################

# give the sub element name, length, coordinates, BoundBox, BoundBox.Center, Area of the SubObjects selected
try:
    SubElement = FreeCADGui.Selection.getSelectionEx()                                        # sub element name with getSelectionEx()
    subElementName = Gui.Selection.getSelectionEx()[0].SubElementNames[0]                     # sub element name with getSelectionEx()
    App.Console.PrintMessage("subElementName : "+str(subElementName)+"\n")
    
    subObjectLength = Gui.Selection.getSelectionEx()[0].SubObjects[0].Length                  # sub element Length
    App.Console.PrintMessage("subObjectLength: "+str(subObjectLength)+"\n\n")
    
    subObjectX1 = Gui.Selection.getSelectionEx()[0].SubObjects[0].Vertexes[0].Point.x         # sub element coordinate X1
    App.Console.PrintMessage("subObject_X1   : "+str(subObjectX1)+"\n")
    subObjectY1 = Gui.Selection.getSelectionEx()[0].SubObjects[0].Vertexes[0].Point.y         # sub element coordinate Y1
    App.Console.PrintMessage("subObject_Y1   : "+str(subObjectY1)+"\n")
    subObjectZ1 = Gui.Selection.getSelectionEx()[0].SubObjects[0].Vertexes[0].Point.z         # sub element coordinate Z1
    App.Console.PrintMessage("subObject_Z1   : "+str(subObjectZ1)+"\n\n")

    try:
        subObjectX2 = Gui.Selection.getSelectionEx()[0].SubObjects[0].Vertexes[1].Point.x     # sub element coordinate X2
        App.Console.PrintMessage("subObject_X2   : "+str(subObjectX2)+"\n")
        subObjectY2 = Gui.Selection.getSelectionEx()[0].SubObjects[0].Vertexes[1].Point.y     # sub element coordinate Y2
        App.Console.PrintMessage("subObject_Y2   : "+str(subObjectY2)+"\n")
        subObjectZ2 = Gui.Selection.getSelectionEx()[0].SubObjects[0].Vertexes[1].Point.z     # sub element coordinate Z2
        App.Console.PrintMessage("subObject_Z2   : "+str(subObjectZ2)+"\n\n")
    except:
        App.Console.PrintMessage("Oups"+"\n\n")            

    subObjectBoundBox = Gui.Selection.getSelectionEx()[0].SubObjects[0].BoundBox              # sub element BoundBox coordinates
    App.Console.PrintMessage("subObjectBBox  : "+str(subObjectBoundBox)+"\n")
    
    subObjectBoundBoxCenter = Gui.Selection.getSelectionEx()[0].SubObjects[0].BoundBox.Center # sub element BoundBoxCenter
    App.Console.PrintMessage("subObjectBBoxCe: "+str(subObjectBoundBoxCenter)+"\n")
    
    surfaceFace = Gui.Selection.getSelectionEx()[0].SubObjects[0].Area                        # Area of the face selected
    App.Console.PrintMessage("surfaceFace    : "+str(surfaceFace)+"\n\n")
except:
    App.Console.PrintMessage("Oups"+"\n\n")            
##################################################################################

# give the area of the object
sel = FreeCADGui.Selection.getSelection()                                 # select object with getSelection()
surface = sel[0].Shape.Area                                               # Area object complete
App.Console.PrintMessage("surfaceObjet   : "+str(surface)+"\n\n")
##################################################################################

# give the Center Of Mass and coordinates of the object
sel = FreeCADGui.Selection.getSelection()                                 # select object with getSelection()
CenterOfMass = sel[0].Shape.CenterOfMass                                  # Center of Mass of the object
App.Console.PrintMessage("CenterOfMass   : "+str(CenterOfMass)+"\n")
App.Console.PrintMessage("CenterOfMassX  : "+str(CenterOfMass[0])+"\n")   # coordinates [0]=X [1]=Y [2]=Z
App.Console.PrintMessage("CenterOfMassY  : "+str(CenterOfMass[1])+"\n")   # or CenterOfMass.x, CenterOfMass.y, CenterOfMass.z
App.Console.PrintMessage("CenterOfMassZ  : "+str(CenterOfMass[2])+"\n\n")
##################################################################################

# list the all faces of the object selected
sel = FreeCADGui.Selection.getSelection()                                 # select object with getSelection()
for j in enumerate(sel[0].Shape.Faces):                                   # List alles faces of the object
    App.Console.PrintMessage("Face           : "+str("Face%d" % (j[0]+1))+"\n")
App.Console.PrintMessage("\n\n")
##################################################################################

# give the volume of the object selected
sel = FreeCADGui.Selection.getSelection()                                 # select object with getSelection()
volume_ = sel[0].Shape.Volume                                             # Volume of the object
App.Console.PrintMessage("volume_        : "+str(volume_)+"\n\n")
##################################################################################
 
# give the BoundBox of the oject selected all type
objs = FreeCADGui.Selection.getSelection()                                 # select object with getSelection()
if len(objs) >= 1:                                                         # serch the object type
    if hasattr(objs[0], "Shape"):
        s = objs[0].Shape
    elif hasattr(objs[0], "Mesh"):      # upgrade with wmayer thanks #http://forum.freecadweb.org/viewtopic.php?f=13&t=22331
        s = objs[0].Mesh
    elif hasattr(objs[0], "Points"):
        s = objs[0].Points

boundBox_= s.BoundBox                                                     # BoundBox of the object
App.Console.PrintMessage("boundBox_      : "+str(boundBox_)+"\n")         # 
 
boundBoxLX   = boundBox_.XLength                                          # Length x boundBox rectangle
boundBoxLY   = boundBox_.YLength                                          # Length y boundBox rectangle
boundBoxLZ   = boundBox_.ZLength                                          # Length z boundBox rectangle

boundBoxXMin = boundBox_.XMin                                             # coordonate XMin
boundBoxYMin = boundBox_.YMin                                             # coordonate YMin
boundBoxZMin = boundBox_.ZMin                                             # coordonate ZMin
boundBoxXMax = boundBox_.XMax                                             # coordonate XMax
boundBoxYMax = boundBox_.YMax                                             # coordonate YMax
boundBoxZMax = boundBox_.ZMax                                             # coordonate ZMax

boundBoxDiag= boundBox_.DiagonalLength                                    # Diagonal Length boundBox rectangle
boundBoxCenter = boundBox_.Center                                         # BoundBox Center
boundBoxCenterOfGravity = boundBox_.CenterOfGravity                       # BoundBox CenterOfGravity

App.Console.PrintMessage("boundBoxLX     : "+str(boundBoxLX)+"\n")
App.Console.PrintMessage("boundBoxLY     : "+str(boundBoxLY)+"\n")
App.Console.PrintMessage("boundBoxLZ     : "+str(boundBoxLZ)+"\n\n")

App.Console.PrintMessage("boundBoxXMin   : "+str(boundBoxXMin)+"\n")
App.Console.PrintMessage("boundBoxYMin   : "+str(boundBoxYMin)+"\n")
App.Console.PrintMessage("boundBoxZMin   : "+str(boundBoxZMin)+"\n")
App.Console.PrintMessage("boundBoxXMax   : "+str(boundBoxXMax)+"\n")
App.Console.PrintMessage("boundBoxYMax   : "+str(boundBoxYMax)+"\n")
App.Console.PrintMessage("boundBoxZMax   : "+str(boundBoxZMax)+"\n\n")

App.Console.PrintMessage("boundBoxDiag   : "+str(boundBoxDiag)+"\n")
App.Console.PrintMessage("boundBoxCenter : "+str(boundBoxCenter)+"\n")

App.Console.PrintMessage("boundBox Center of Gravity : "+str(boundBoxCenterOfGravity )+"\n\n")

##################################################################################

# give the complete placement of the object selected
sel = FreeCADGui.Selection.getSelection()                                 # select object with getSelection()
pl = sel[0].Shape.Placement                                               # Placement Vector XYZ and Yaw-Pitch-Roll
App.Console.PrintMessage("Placement      : "+str(pl)+"\n")
##################################################################################

# give the placement Base (xyz) of the object selected
sel = FreeCADGui.Selection.getSelection()                                 # select object with getSelection()
pl = sel[0].Shape.Placement.Base                                          # Placement Vector XYZ
App.Console.PrintMessage("PlacementBase  : "+str(pl)+"\n\n")
##################################################################################
 
# give the placement Base (xyz) of the object selected
sel = FreeCADGui.Selection.getSelection()                                 # select object with getSelection()
oripl_X = sel[0].Placement.Base[0]                                        # decode Placement X
oripl_Y = sel[0].Placement.Base[1]                                        # decode Placement Y
oripl_Z = sel[0].Placement.Base[2]                                        # decode Placement Z

# same 
#oripl_X = sel[0].Placement.Base.x                                        # decode Placement X
#oripl_Y = sel[0].Placement.Base.y                                        # decode Placement Y
#oripl_Z = sel[0].Placement.Base.z                                        # decode Placement Z
 
App.Console.PrintMessage("oripl_X        : "+str(oripl_X)+"\n")
App.Console.PrintMessage("oripl_Y        : "+str(oripl_Y)+"\n")
App.Console.PrintMessage("oripl_Z        : "+str(oripl_Z)+"\n\n")
##################################################################################

# give the placement rotation of the object selected (x, y, z, angle rotation)
sel = FreeCADGui.Selection.getSelection()                                 # select object with getSelection()
rotation = sel[0].Placement.Rotation                                      # decode Placement Rotation
App.Console.PrintMessage("rotation              : "+str(rotation)+"\n\n")
##################################################################################

# give the placement rotation of the object selected (x, y, z, angle rotation)
sel = FreeCADGui.Selection.getSelection()                                 # select object with getSelection()
pl = sel[0].Shape.Placement.Rotation                                      # decode Placement Rotation other method
App.Console.PrintMessage("Placement Rot         : "+str(pl)+"\n\n")
##################################################################################

# give the rotation of the object selected (angle rotation)
sel = FreeCADGui.Selection.getSelection()                                 # select object with getSelection()
pl = sel[0].Shape.Placement.Rotation.Angle                                # decode Placement Rotation Angle
App.Console.PrintMessage("Placement Rot Angle   : "+str(pl)+"\n\n")
##################################################################################

# give the rotation.Q of the object selected (angle rotation in Radian) for convert: math.degrees(angleInRadian)
sel = FreeCADGui.Selection.getSelection()                                 # select object with getSelection()
Rot   = sel[0].Placement.Rotation.Q                                       # Placement Rotation Q
App.Console.PrintMessage("Rot           : "+str(Rot)+ "\n")
 
Rot_0 = sel[0].Placement.Rotation.Q[0]                                    # decode Placement Rotation Q
App.Console.PrintMessage("Rot_0         : "+str(Rot_0)+ " rad ,  "+str(180 * Rot_0 / 3.1416)+" deg "+"\n") # or math.degrees(angle)
 
Rot_1 = sel[0].Placement.Rotation.Q[1]                                    # decode Placement Rotation 1
App.Console.PrintMessage("Rot_1         : "+str(Rot_1)+ " rad ,  "+str(180 * Rot_1 / 3.1416)+" deg "+"\n") # or math.degrees(angle)
 
Rot_2 = sel[0].Placement.Rotation.Q[2]                                    # decode Placement Rotation 2
App.Console.PrintMessage("Rot_2         : "+str(Rot_2)+ " rad ,  "+str(180 * Rot_2 / 3.1416)+" deg "+"\n") # or math.degrees(angle)

Rot_3 = sel[0].Placement.Rotation.Q[3]                                    # decode Placement Rotation 3
App.Console.PrintMessage("Rot_3         : "+str(Rot_3)+"\n\n")

Rot_Axis = sel[0].Placement.Rotation.Axis                                 # Placement Rotation .Axis
App.Console.PrintMessage("Rot_Axis      : "+str(Rot_Axis)+ "\n")
 
Rot_Angle = sel[0].Placement.Rotation.Angle                               # Placement Rotation .Angle
App.Console.PrintMessage("Rot_Angle     : "+str(Rot_Angle)+ "\n\n")
##################################################################################

# give the rotation of the object selected toEuler (angle rotation in degrees)
sel = FreeCADGui.Selection.getSelection()                             # select object with getSelection()
angle   = sel[0].Shape.Placement.Rotation.toEuler()                   # angle Euler
App.Console.PrintMessage("Angle          : "+str(angle)+"\n")
Yaw   = sel[0].Shape.Placement.Rotation.toEuler()[0]                  # decode angle Euler Yaw (Z) lacet (alpha)
App.Console.PrintMessage("Yaw            : "+str(Yaw)+"\n")
Pitch = sel[0].Shape.Placement.Rotation.toEuler()[1]                  # decode angle Euler Pitch (Y) tangage (beta)
App.Console.PrintMessage("Pitch          : "+str(Pitch)+"\n")
Roll  = sel[0].Shape.Placement.Rotation.toEuler()[2]                  # decode angle Euler Roll (X) roulis (gamma)
App.Console.PrintMessage("Roll           : "+str(Roll)+"\n\n")

rot = App.Rotation()
rot.setYawPitchRoll(45,45,0)
print("Angle: ", rot.Angle)
print("Axis: ", rot.Axis)
print("RawAxis: ", rot.RawAxis)
print("YawPitchRoll: ", rot.getYawPitchRoll())
print("Rotation: ", rot)
print("Quaternion: ", rot.Q)

##################################################################################

# find Midpoint of the selected line
import Draft, DraftGeomUtils
sel = FreeCADGui.Selection.getSelection()
vecteur = DraftGeomUtils.findMidpoint(sel[0].Shape.Edges[0])              # find Midpoint
App.Console.PrintMessage(vecteur)
Draft.makePoint(vecteur)
##################################################################################

Przewiń na górę strony

Samodzielne wyszukiwanie elementu z etykietą

# Extract the coordinate X,Y,Z and Angle giving the label (here "Cylindre")
App.Console.PrintMessage("Base.x       : "+str(FreeCAD.ActiveDocument.getObjectsByLabel("Cylindre")[0].Placement.Base.x)+"\n")
App.Console.PrintMessage("Base.y       : "+str(FreeCAD.ActiveDocument.getObjectsByLabel("Cylindre")[0].Placement.Base.y)+"\n")
App.Console.PrintMessage("Base.z       : "+str(FreeCAD.ActiveDocument.getObjectsByLabel("Cylindre")[0].Placement.Base.z)+"\n")
App.Console.PrintMessage("Base.Angle   : "+str(FreeCAD.ActiveDocument.getObjectsByLabel("Cylindre")[0].Placement.Rotation.Angle)+"\n\n")
##################################################################################

Uwaga: Zazwyczaj kąty są podawane w radianach. Aby je przekonwertować można użyć formuł:

  1. kąt w stopniach na radiany:
    • Kąt w radianach = pi * (kąt w stopniach) / 180
    • Kąt w radianach = math.radians(kąt w stopniach)
  2. kąt w radianach na stopnie:
    • Kąt w stopniach = 180 * (kąt w radianach) / pi
    • Kąt w stopniach = math.degrees(kąt w radianach)

Przewiń na górę strony

Współrzędne kartezjańskie

Ten kod wyświetla współrzędne kartezjańskie wybranego elementu.

Zmień wartość "numberOfPoints", jeśli chcesz uzyskać inną liczbę punktów (precyzję).

numberOfPoints = 100                                                         # Decomposition number (or precision you can change)
selectedEdge = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0].copy() # select one element
points  = selectedEdge.discretize(numberOfPoints)                            # discretize the element
i=0
for p in points:                                                             # list and display the coordinates
    i+=1
    print( i, " X", p.x, " Y", p.y, " Z", p.z)

Inna metoda wyświetlania na "Int" i "Float"

import Part
from FreeCAD import Base

c=Part.makeCylinder(2,10)        # create the circle
Part.show(c)                     # display the shape

# slice accepts two arguments:
#+ the normal of the cross section plane
#+ the distance from the origin to the cross section plane. Here you have to find a value so that the plane intersects your object
s=c.slice(Base.Vector(0,1,0),0)  # 

# here the result is a single wire
# depending on the source object this can be several wires
s=s[0]

# if you only need the vertexes of the shape you can use
v=[]
for i in s.Vertexes:
    v.append(i.Point)

# but you can also sub-sample the section to have a certain number of points (int) ...
p1=s.discretize(20)
ii=0
for i in p1:
    ii+=1
    print( i )                                             # Vector()
    print( ii, ": X:", i.x, " Y:", i.y, " Z:", i.z )       # Vector decode
Draft.makeWire(p1,closed=False,face=False,support=None)    # to see the difference accuracy (20)

## uncomment to use
#import Draft
#Draft.downgrade(App.ActiveDocument.ActiveObject,delete=True)  # first transform the DWire in Wire         "downgrade"
#Draft.downgrade(App.ActiveDocument.ActiveObject,delete=True)  # second split the Wire in single objects   "downgrade"
#
##Draft.upgrade(FreeCADGui.Selection.getSelection(),delete=True) # to attach lines contiguous SELECTED use "upgrade"


# ... or define a sampling distance (float)
p2=s.discretize(0.5)
ii=0
for i in p2:
    ii+=1
    print( i )                                             # Vector()
    print( ii, ": X:", i.x, " Y:", i.y, " Z:", i.z )       # Vector decode 
Draft.makeWire(p2,closed=False,face=False,support=None)  # to see the difference accuracy (0.5)

## uncomment to use
#import Draft
#Draft.downgrade(App.ActiveDocument.ActiveObject,delete=True)  # first transform the DWire in Wire         "downgrade"
#Draft.downgrade(App.ActiveDocument.ActiveObject,delete=True)  # second split the Wire in single objects   "downgrade"
#
##Draft.upgrade(FreeCADGui.Selection.getSelection(),delete=True) # to attach lines contiguous SELECTED use "upgrade"

Przewiń na górę strony

Wybierz wszystkie obiekty w dokumencie

import FreeCAD
for obj in FreeCAD.ActiveDocument.Objects:
    print( obj.Name )                               # display the object Name
    objName = obj.Name
    obj = App.ActiveDocument.getObject(objName)
    Gui.Selection.addSelection(obj)                 # select the object

Przewiń na górę strony

Wybierz ścianę obiektu według nazwy obiektu i numeru ściany

# select one face of the object
import FreeCAD, Draft
App=FreeCAD
nameObject = "Box"                             # objet
faceSelect = "Face3"                           # face to selection
loch=App.ActiveDocument.getObject(nameObject)  # objet
Gui.Selection.clearSelection()                 # clear all selection
Gui.Selection.addSelection(loch,faceSelect)    # select the face specified
s = Gui.Selection.getSelectionEx()
#Draft.makeFacebinder(s)                       #

Przewiń na górę strony

Uzyskaj wektor normalny powierzchni obiektu przez Nazwa obiektu i numer Ściany (r.Q)

## normal of a face by giving the number of the face and the name of the object (rotation Q with yL, uV) = (App.Vector (x, y, z), angle))
## normal d'une face en donnant le numero de la face et le nom de l'objet (rotation Q avec yL, uV) = (App.Vector(x, y, z),angle))
from FreeCAD import Vector

numero_Face = 2      # number of the face searched (begin 0, 1, 2, 3 .....)
nomObjet    = "Box"  # object name
yL = Gui.ActiveDocument.getObject(nomObjet).Object.Shape.Faces[numero_Face].CenterOfMass
uv = Gui.ActiveDocument.getObject(nomObjet).Object.Shape.Faces[numero_Face].Surface.parameter(yL)

nv = Gui.ActiveDocument.getObject(nomObjet).Object.Shape.Faces[numero_Face].normalAt(uv[0], uv[1])
direction = yL.sub(nv + yL)
print("Direction  : ",direction)

r = App.Rotation(App.Vector(0,0,1),direction)
print("Rotation   : ", r)
print("Rotation Q : ", r.Q)

Przewiń na górę strony

Pobierz normalny wektor ściany obiektu według nazwy obiektu i numeru ściany

numero_Face = 2       # number of the face searched (begin 0, 1, 2, 3 .....)
nomObjet    = "Box"   # object name
normal      = Gui.ActiveDocument.getObject(nomObjet).Object.Shape.Faces[numero_Face].normalAt(0,0)
print("Face"+str(numero_Face), " : ", normal)

Przewiń na górę strony

Pobierz wektor normalny wybranego obiektu i numer ściany

## normal of a face by giving the number of the face of the selected object
selectionObjects = FreeCADGui.Selection.getSelection()     
numero_Face = 3    # numero de la face recherchee
normal = selectionObjects[0].Shape.Faces[numero_Face].normalAt(0,0)
print(normal)
# selectionne la face numerotee
Gui.Selection.clearSelection()
Gui.Selection.addSelection(selectionObjects[0],"Face"+str(numero_Face))

Przewiń na górę strony

Pobierz wektor normalny na powierzchni

Ten przykład pokazuje, jak znaleźć wektor normalny na powierzchni, znajdując parametry u, v jednego punktu na powierzchni i używając parametrów u, v do znalezienia wektora normalnego.

def normal(self):
   ss=FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0].copy()#SubObjects[0] is the edge list
   points  = ss.discretize(3.0)#points on the surface edge, 
             #this example just use points on the edge for example. 
             #However point is not necessary on the edge, it can be anywhere on the surface. 
   face=FreeCADGui.Selection.getSelectionEx()[0].SubObjects[1]
   for pp in points:
      pt=FreeCAD.Base.Vector(pp.x,pp.y,pp.z)#a point on the surface edge
      uv=face.Surface.parameter(pt)# find the surface u,v parameter of a point on the surface edge
      u=uv[0]
      v=uv[1]
      normal=face.normalAt(u,v)#use u,v to find normal vector
      print( normal)
      line=Part.makeLine((pp.x,pp.y,pp.z), (normal.x,normal.y,normal.z))
      Part.show(line)

Przewiń na górę strony

Pobierz wektor normalny ściany i utwórz linię w punkcie kliknięcia myszką

import PySide2
import Draft, Part, FreeCAD, FreeCADGui
import FreeCADGui as Gui
from FreeCAD import Base

FreeCAD.ActiveDocument.openTransaction("Tyty")    # memorise les actions (avec annuler restore)
selectedFace = FreeCADGui.Selection.getSelectionEx()[0].SubObjects[0]
pointClick = FreeCADGui.Selection.getSelectionEx()[0].PickedPoints[0]

########## section direction
plr = FreeCAD.Placement()
yL = pointClick
uv = selectedFace.Surface.parameter(yL)
nv = direction = selectedFace.normalAt(uv[0], uv[1])
r = App.Rotation(App.Vector(0,0,1),nv)
plr.Rotation.Q = r.Q
plr.Base = pointClick
########## section direction

line = Draft.make_wire([App.Vector(0.0,0.0,0.0), App.Vector(0.0,0.0,20.0)] )    # create line
line.Placement=plr
FreeCAD.ActiveDocument.recompute()
print( "Direction (radian) : ",direction )    # direction in radian

Przewiń na górę strony

Pobieranie wektora normalnego powierzchni z pliku STL

def getNormal(cb):
    if cb.getEvent().getState() == coin.SoButtonEvent.UP:
        pp = cb.getPickedPoint()
        if pp:
            vec = pp.getNormal().getValue()
            index = coin.cast(pp.getDetail(), "SoFaceDetail").getFaceIndex()
            print("Normal: {}, Face index: {}".format(str(vec), index))

from pivy import coin
meth=Gui.ActiveDocument.ActiveView.addEventCallbackPivy(coin.SoMouseButtonEvent.getClassTypeId(), getNormal)

Jeśli skończyłeś, uciekaj do wyjścia:

Gui.ActiveDocument.ActiveView.removeEventCallbackPivy(coin.SoMouseButtonEvent.getClassTypeId(), meth)

Przewiń na górę strony

Utwórz jeden obiekt w pozycji ujęcia widoku

# create one object of the position to camera with "getCameraOrientation()"
# the object is still facing the screen
import Draft

plan = FreeCADGui.ActiveDocument.ActiveView.getCameraOrientation()
plan = str(plan)
###### extract data
a    = ""
for i in plan:
    if i in ("0123456789e.- "):
        a+=i
a = a.strip(" ")
a = a.split(" ")
####### extract data

#print( a)
#print( a[0])
#print( a[1])
#print( a[2])
#print( a[3])

xP = float(a[0])
yP = float(a[1])
zP = float(a[2])
qP = float(a[3])

pl = FreeCAD.Placement()
pl.Rotation.Q = (xP,yP,zP,qP)         # rotation of object
pl.Base = FreeCAD.Vector(0.0,0.0,0.0) # here coordinates XYZ of Object
rec = Draft.makeRectangle(length=10.0,height=10.0,placement=pl,face=False,support=None) # create rectangle
#rec = Draft.makeCircle(radius=5,placement=pl,face=False,support=None)                   # create circle
print( rec.Name)

tutaj ten sam kod uproszczony:

import Draft
pl = FreeCAD.Placement()
pl.Rotation = FreeCADGui.ActiveDocument.ActiveView.getCameraOrientation()
pl.Base = FreeCAD.Vector(0.0,0.0,0.0)
rec = Draft.makeRectangle(length=10.0,height=10.0,placement=pl,face=False,support=None)

Przewiń na górę strony

Odczyt i zapis jednego wyrażenia

import Draft
doc = FreeCAD.ActiveDocument

pl=FreeCAD.Placement()
pl.Rotation.Q=(0.0,-0.0,-0.0,1.0)
pl.Base=FreeCAD.Vector(0.0,0.0,0.0)
obj = Draft.makeCircle(radius=1.0,placement=pl,face=False,support=None)    # create circle

print( obj.PropertiesList )                                                  # properties disponible in the obj

doc.getObject(obj.Name).setExpression('Radius', u'2mm')                    # modify the radius
doc.getObject(obj.Name).setExpression('Placement.Base.x', u'10mm')         # modify the placement 
doc.getObject(obj.Name).setExpression('FirstAngle', u'90')                 # modify the first angle
doc.recompute()

expressions = obj.ExpressionEngine                                         # read the expression list
print( expressions)

for i in expressions:                                                      # list and separate the data expression
    print( i[0]," = ",i[1])

Przewiń na górę strony

Tworzenie szkicu na powierzchni w środowisku Projekt Części

Ten fragment kodu może być przydatny, jeśli chcesz utworzyć szkic na powierzchni w środowisku pracy Projekt Części z poziomu makrodefinicji. Zwróć uwagę, że body może mieć wartość Brak, jeśli nie wybrano żadnej aktywnej bryły, a obiekt Selection może być pusty.

body = Gui.ActiveDocument.ActiveView.getActiveObject('pdbody')
first_selection = Gui.Selection.getSelectionEx()[0]

feature = first_selection.Object
face_name = first_selection.SubElementNames[0]

sketch = App.ActiveDocument.addObject('Sketcher::SketchObject','MySketch')
body.addObject(sketch)
sketch.MapMode = 'FlatFace'
sketch.Support = (feature, face_name)

App.ActiveDocument.recompute()

Przewiń na górę strony

Jak symulować kliknięcie myszką w danej współrzędnej

Pozycja jest względna w stosunku do widżetu GL. Zobacz ten wątek na forum.

from PySide2 import QtCore
from PySide2 import QtGui
from PySide2 import QtWidgets

mw = Gui.getMainWindow()
gl = mw.findChild(QtWidgets.QOpenGLWidget)
me = QtGui.QMouseEvent(QtCore.QEvent.MouseButtonRelease, QtCore.QPoint(800,300), QtCore.Qt.LeftButton, QtCore.Qt.LeftButton, QtCore.Qt.NoModifier)

app = QtWidgets.QApplication.instance()
app.sendEvent(gl, me)

Jeśli masz punkt 3d i chcesz uzyskać punkt 2d na widżecie opengl, użyj tego:

from PySide2 import QtCore
from PySide2 import QtGui
from PySide2 import QtWidgets
from FreeCAD import Base

x, y, z, = 10,10,10
v = Gui.ActiveDocument.ActiveView
point3d = Base.Vector(x, y, z)
point2d = v.getPointOnScreen(point3d)
size = v.getSize()
coordX = point2d[0]
coordY = size[1] - point2d[1]

me = QtGui.QMouseEvent(QtCore.QEvent.MouseButtonRelease, QtCore.QPoint(coordX,coordY), QtCore.Qt.LeftButton, QtCore.Qt.LeftButton, QtCore.Qt.NoModifier)

Przewiń na górę strony

Jak utworzyć ścianę z otworami przy użyciu Python API

Ten fragment pokazuje, jak utworzyć ścianę z wewnętrznymi otworami za pomocą interfejsu API Python. Zobacz ten wątek na forum.

import FreeCAD, Part

# Create poles that will define the Face
pts = [(-2, 2, 0),
       (0, 2, 1),
       (2, 2, 0),
       (2, -2, 0),
       (0, -2, 1),
       (-2, -2, 0)]

bs = Part.BSplineCurve()
bs.buildFromPoles(pts, True)  # True makes this periodic/closed

# Make the Face from the curve
myFace = Part.makeFilledFace([bs.toShape()])

# Create geometry for holes that will be cut in the surface
hole0 = Part.Geom2d.Circle2d(FreeCAD.Base.Vector2d(0,0), 1.0)
hole1 = Part.Geom2d.Circle2d(FreeCAD.Base.Vector2d(0,1.5), 0.1)

edge0 = hole0.toShape(myFace)
edge1 = hole1.toShape(myFace)
wireb = Part.Wire(bs.toShape())
wire0 = Part.Wire(edge0)
wire1 = Part.Wire(edge1)

# Cut holes in the face
myFace.cutHoles([wire0])
myFace.validate()  # This is required
myFace.cutHoles([wire1])
myFace.validate()

Part.show(myFace)

Przewiń na górę strony

Zamknij i uruchom ponownie FreeCAD

import PySide2 
from PySide2 import QtWidgets, QtCore, QtGui

def restart_freecad():
    """Shuts down and restarts FreeCAD"""

    args = QtWidgets.QApplication.arguments()[1:]
    if FreeCADGui.getMainWindow().close():
        QtCore.QProcess.startDetached(
            QtWidgets.QApplication.applicationFilePath(), args
        )

Przewiń na górę strony

Coin3D

Zapoznaj się z artykułem wycinki Coin3d.

Przewiń na górę strony

Powiązane

Przewiń na górę strony