Arch: Rebar Stirrup

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Arch Rebar Stirrup and the translation is 23% complete.

Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎română • ‎русский

Arch Rebar Stirrup.png Arch Rebar Stirrup

Menu location
Arch → Rebar tools
Workbenches
Arch
Default shortcut
None
See also
Helical Rebar
 
This command is part of the Reinforcement AddOn, that you can install via menu Tools → Addons Manager


Arch Rebar Stirrup.svg Arch Rebar Stirrup

Menu location
Arch → Rebar tools
Workbenches
Arch, BIM
Default shortcut
None
Introduced in version
0.17
See also
Helical Rebar, Arch Rebar


Descriere

Instrumentul Arch Rebar Stirrup.png Stirrup Rebar permite utilizatorului să creeze un

stirrup reinforcing bar în elementul de structură.

This command is part of the Reinforcement Addon, that you can install with the Addon Manager, via the menu Tools → Addon manager → Reinforcement.

Arch Rebar Stirrup example.png

Stirrup.png

Cum se folosește

  1. Creează un element structure
  2. Select any face of the structure
  3. Then select Arch Rebar Stirrup.png Stirrup Rebar from the rebar tools
  4. A task panel will pop-out on the left side of the screen as shown below StirrupDialog.png
  5. Select the desired orientation
  6. Give the inputs like left cover, right cover, top cover, bottom, front cover, bent angle, bent factor, rounding and diameter of the rebar
  7. Select the mode of distribution either amount or spacing
  8. If spacing is selected, a user can also opt for custom spacing
  9. Pick selected face is used to verify or change the face for rebar distribution
  10. Click OK or Apply to generate the rebars
  11. Click pe Cancel ieșirea din task panel

StirrupDialog.png

Taskview panel for the Arch Rebar Stirrup tool


Proprietăți

  • DATAFront Cover: Distanța dintre armături și fațetele selectate.
  • DATARight Cover: Distanța între capătul dintre capătul dreapta al armăturii și fațeta dreapta a structurii.
  • DATALeft Cover: Distanța dintre capătul din stânga al armăturii și fațeta stângă a structurii
  • DATABottom Cover: Distanța dintre armătură și fațeta de jos a structurii.
  • DATATop Cover: Distanța dintre armătură și fața superioară a structurii.
  • DATABent Angle: Bent angle defines the angle at the ends of a stirrup.
  • DATABent Factor: Bent Factor defines length of stirrup end.
  • DATAAmount: Cantitatea de armătură
  • DATASpacing: Distanța dintre acele fiecărei bare.

Scrip-Programare

Instrumentul Arch Rebar Stirrup.png Stirrup Rebar poate fi utilizat în macros și de la consola Python prin utilizarea următoarei funcției:

Rebar = makeStirrup(l_cover, r_cover, t_cover, b_cover, f_cover,
                    bentAngle, bentFactor, diameter, rounding, amount_spacing_check, amount_spacing_value,
                    structure=None, facename=None)
  • Adds a Stirrup reinforcing bar object to the given structural object.
  • If no Structure and Facename is given, it will take user selected face as input.
  • Here CoverAlong argument is having type tuple.
  • Returns the new Rebar object.

Exemplu: Crearea unei armături tip Stirrup rebar.

import Draft, Arch, Stirrup

# It doesn't work if the structure is not based on a face
# Structure = Arch.makeStructure(length=1000, width=400, height=400)

Rect = Draft.makeRectangle(400, 400)
Structure = Arch.makeStructure(Rect, height=1600)
Structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()

Rebar = Stirrup.makeStirrup(20, 20, 20, 20, 20,
                            115, 4, 8, 2, True, 10, Structure, "Face6")

Schimbarea proprietăților barei Stirrup.

editStirrup(Rebar, l_cover, r_cover, t_cover, b_cover, f_cover,
            bentAngle, bentFactor, diameter, rounding, amount_spacing_check, amount_spacing_value,
            structure=None, facename=None)
  • Rebar is a previously created StirrupRebar object.
  • The other parameters are the same as required by the makeStirrup() function.
  • structure and facename may be omitted so that the rebar stays in the original structure.
import Stirrup

Stirrup.editStirrup(Rebar, 20, 20, 20, 20, 50,
                    100, 4, 14, 8, True, 8)