Rinforzo di colonna

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Arch Rebar Circular ColumnReinforcement and the translation is 43% complete.

Other languages:
English • ‎français • ‎italiano
Arrow-left.svg Arch Rebar Helical.svg Armatura elicoidale Pagina precedente:
Pagina successiva: Rinforzo di pilastro Arch Rebar ColumnReinforcement.svg Arrow-right.svg

Arch Rebar ColumnReinforcement.svg Rinforzo di colonna

Posizione nel menu
Arch → Strumenti armatura
Ambiente
Arch, BIM
Avvio veloce
Nessuno
Introdotto nella versione
0.19
Vedere anche
Rinforzo di colonna con 2 staffe e 6 barre, Armatura


Descrizione

Lo strumento Rinforzo di colonna consente all'utente di creare delle barre di rinforzo all'interno di un oggetto Struttura Colonna.

Questo comando fa parte del addon Reinforcement, che si può installare con Addon manager, tramite il menu Strumenti → Addon manager → Reinforcement.

Arch Rebar Circular ColumnReinforcement example.png

Rinforzo di colonna rotonda all'interno di una Struttura colonna


Utilizzo

1. Select top face of a previously created Arch Structure.svg Arch Structure object.
2. Then select Arch Rebar ColumnReinforcement.svg Column Reinforcement from the rebar tools.
3. A dialog box will pop-out on screen as shown below.

ColumnReinforcementDialog Ties.png

Dialog Box for the Arch Rebar ColumnReinforcement tool


4. Select the Circular Column radio button in column reinforcement dialog.

CircularColumnReinforcementDialog.png

Dialog Box for Circular Column Reinforcement


5. Give inputs for data related to circular column reinforcement.
6. Click OK or Apply to generate circular column reinforcement.

7. Click Cancel to exit the dialog box.


Properties

Helical Rebars:

  • DATASide Cover: The distance between rebar to the curved face.
  • DATATop Cover: The distance between rebar from the top face of the structure.
  • DATABottom Cover: The distance between rebar from the bottom face of the structure.
  • DATAPitch: The pitch of a helix is the height of one complete helix turn, measured parallel to the axis of the helix.
  • DATADiameter: Diameter of the rebar.

Main Rebars:

  • DATATop Offset: The distance between rebars from the top face of the structure.
  • DATABottom Offset: The distance between rebars from the bottom face of the structure.
  • DATADiameter: Diameter of the main rebars.
  • DATANumber: The number of main rebars.
  • DATAAngle: The angular distance between ties.

Scripting

See also: Arch API, Reinforcement API and FreeCAD Scripting Basics.

The ColumnReinforcement tool can be used in macros and from the Python console by using the following function:

Create Circular Column Reinforcement

RebarGroup = CircularColumn.makeReinforcement(
    s_cover,
    helical_rebar_t_offset,
    helical_rebar_b_offset,
    pitch,
    dia_of_helical_rebar,
    main_rebars_t_offset,
    main_rebars_b_offset,
    dia_of_main_rebars,
    number_angle_check,
    number_angle_value,
    structure=None,
    facename=None,
)
  • Creates a RebarGroup object from the given structure, which is an Arch Structure, and facename, which is a face of that structure.
    • If no structure nor facename are given, it will take the user selected face as input.
  • s_cover, helical_rebar_t_offset, and helical_rebar_b_offset are inner offset distances for the helical rebar with respect to the faces of the structure. They are respectively the side, top and bottom offsets.
  • pitch is the parameter that determines how close or far apart each helical loop is to each other.
  • dia_of_helical_rebar is the diameter of the helical rebar inside the structure.
  • main_rebars_t_offset and main_rebars_b_offset are inner offset distances for the main rebars with respect to the top and bottom faces of the structure, respectively.
  • dia_of_main_rebars is the diameter of the main rebars.
  • number_angle_check if it is True it will create as many main rebars as given by number_angle_value; if it is False it will create main rebars at an angle of number_spacing_value, specified in degrees.
  • number_angle_value specifies the number of main rebars, or the value of the angle between the main rebars, depending on number_angle_check.


Example

import FreeCAD, Draft, Arch
from ColumnReinforcement import CircularColumn

Circle = Draft.makeCircle(radius=250)
Structure = Arch.makeStructure(Circle)
Structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()

RebarGroup = CircularColumn.makeReinforcement(
    s_cover=20,
    helical_rebar_t_offset=40,
    helical_rebar_b_offset=40,
    pitch=50,
    dia_of_helical_rebar=8,
    main_rebars_t_offset=20,
    main_rebars_b_offset=20,
    dia_of_main_rebars=16,
    number_angle_check=True,
    number_angle_value=6,
    structure=Structure,
    facename="Face3",
).rebar_group

Edition of Circular Column Reinforcement

You can change the properties of the halical and main rebars with the following function

rebar_group = editReinforcement(
    rebar_group,
    s_cover,
    helical_rebar_t_offset,
    helical_rebar_b_offset,
    pitch,
    dia_of_helical_rebar,
    main_rebars_t_offset,
    main_rebars_b_offset,
    dia_of_main_rebars,
    number_angle_check,
    number_angle_value,
    structure=None,
    facename=None,
)
  • rebar_group is a previously created ColumnReinforcement group object.
  • The other parameters are the same as required by the makeSingleTieFourRebars() function.
  • structure and facename may be omitted so that the rebar stays in the original structure.

Esempio

from ColumnReinforcement import CircularColumn

rebar_group = CircularColumn.editReinforcement(
    rebar_group,
    s_cover=30,
    helical_rebar_t_offset=30,
    helical_rebar_b_offset=30,
    pitch=60,
    dia_of_helical_rebar=10,
    main_rebars_t_offset=-30,
    main_rebars_b_offset=-30,
    dia_of_main_rebars=18,
    number_angle_check=False,
    number_angle_value=45,
    structure=Structure,
    facename="Face3",
)
Arrow-left.svg Arch Rebar Helical.svg Armatura elicoidale Pagina precedente:
Pagina successiva: Rinforzo di pilastro Arch Rebar ColumnReinforcement.svg Arrow-right.svg