Arch Check

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Arch Check and the translation is 14% complete.

Outdated translations are marked like this.
Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎română • ‎русский • ‎svenska
Arrow-left.svg Previous: Arch MergeWalls.svg Merge Walls

Arch Check.svg Arch Check

Menyplacering
Arch → Utilities → Check
Arbetsbänk(ar)
Arch
Standard genväg
None
Introducerad i version
-
Se även
Arch CloseHoles


Beskrivning

This tool checks the current document or the selected objects for non-solid Part or Arch objects, that might give problems, since most operations of the Arch module require solid objects.

How to use

  1. Press the Arch Check.svg Check entry in Arch → Utilities → Check.

Scripting

See also: Arch API and FreeCAD Scripting Basics.

This tool can be used in macros and from the Python console by using the following function:

list_bad = check(objectslist, includehidden=False)
  • Checks if the given objects in objectslist contain only solids.
  • If includehidden is True it will include all hidden objects, otherwise it will omit them from the search.
  • Returns list_bad, a list with the objects that are not derived from a Part::Feature, or components that are not closed, not valid, don't contain solids, or that contain faces that are not part of any solid. This is used to detect Arch or Draft wires and profiles that aren't solids.
    • Each element in list_bad is another list [object, message], where object is the detected non-solid, and message indicates the reason why it was included in this list.

Example:

import FreeCAD, Draft, Arch

p1 = FreeCAD.Vector(0, 0, 0)
p2 = FreeCAD.Vector(2000, 0, 0)
baseline = Draft.makeLine(p1, p2)
Wall1 = Arch.makeWall(baseline, length=None, width=150, height=2000)
FreeCAD.ActiveDocument.recompute()

Wall2 = Arch.makeWall(None, length=2000, width=200, height=1000)
FreeCAD.ActiveDocument.recompute()

Circle = Draft.makeCircle(450)
Wire = Draft.makeWire([FreeCAD.Vector(1000, 0, 0), FreeCAD.Vector(1500, 1000, 0), FreeCAD.Vector(2500, -1000, 0)])

list_bad = Arch.check([Wall1, Wall2, Circle, Wire], includehidden=True)
print(list_bad)
Arrow-left.svg Previous: Arch MergeWalls.svg Merge Walls