- 1 Introduction
- 2 Installing
- 3 Getting Started
- 4 Assembling
- 4.1 Keeping track
- 4.2 Constraints
- 4.2.1 Point on Point
- 4.2.2 Point on Line
- 4.2.3 Point on Plane
- 4.2.4 Sphere on Sphere
- 4.2.5 Circular Edge on Circular Edge
- 4.2.6 Axis Coincident
- 4.2.7 Axis Parallel
- 4.2.8 Axis on Plane parallel
- 4.2.9 Axis on Plane normal
- 4.2.10 Axis on Plane angle
- 4.2.11 Plane Parallel
- 4.2.12 Plane on Plane
- 4.2.13 Plane Angular
- 4.2.14 Coincidence at Center of Mass
- 4.3 Subassemblies
- 5 Constraint Handling
- 6 Part Lists
- 7 Special Features
- 8 Preferences
- 9 Troubleshooting
- 10 Animation
The A2plus workbench is an external workbench to assemble different parts in FreeCAD.
This documentation describes A2plus version 0.4.40 or newer.
The A2plus workbench is an addon to FreeCAD. It can easily be installed via the menu Tools → Addon Manager. A2plus is under active development and will get new features frequently. Therefore you should update it regularly using also the menu Tools → Addon Manager. The A2plus code is hosted and developed on GitHub and can also be installed manually by copying it into FreeCAD's MOD directory.
At first switch to the A2plus toolbar in FreeCAD. To create an assembly create a new file in FreeCAD. At first this file needs to be saved. It is recommended (but not necessary) to save it in the same folder of the parts you want to assemble.
Now parts can be added to the assembly by using the toolbar button or . The button adds all bodies in the selected file as a single part. When using the button you can choose which single body of the file should be imported as part.
The first added part gets a fixed position by default. (You can change this later via the part property Datafixed Position.)
Parts that are already in the assembly can be cloned with the toolbar button .
To edit a part from the assembly, select it in the model tree and use the toolbar button . This will open the part into a new tab in FreeCAD or switch to its tab if the file is already opened.
To import changes in parts into the assembly click on the toolbar button .
Imported parts will keep their external dependencies and can be edited. For well-defined parts like screws it is however useful that their shape cannot be edited. This can be achieved with the toolbar button that converts the selected part to a static copy of the original part.
Assembling parts is done by adding constraints between parts. After a constraint A2plus will move the parts according to the constraint if possible.
For complex constraints between parts A2plus might fail to solve the constraints. Therefore also have a look at section Troubleshooting for strategies to resolve such cases.
Constraints between parts are added by keeping thekey pressed and selecting an edge or face of two parts. The constraint will be added attached in the model tree to the affected parts.
The more parts you add, the more important it is to keep track. A2plus therefore offers these tools to move and view parts:
- To move a part around in the assembly, select it in the model tree and use the toolbar button . When you placed the part where you like it, left-click with the mouse. If the moved part already has constraints it will be placed accordingly by pressing the toolbar button because this triggers to resolve all constraints of the assembly.
- To show a constraint select it in the model tree and use the toolbar button . This will make the whole assembly transparent and highlight the two objects that are connected via the constraint. To go back to the normal view, left-click into the assembly.
- To show only certain parts in the assembly, select these parts in the model tree and use the toolbar button . Alternatively you can hide a certain part by selecting it in the model tree and pressing to toggle its visibility.
- To toggle the transparency view of the whole assembly you can use the toolbar button .
- Every part can be made transparent using the normal FreeCAD editing. However sometimes the transparency setting for parts is lost when reopening the assembly due to a bug in FreeCAD. As workaround you can use the toolbar button to restore the transparency settings.
When creating a constraint such a dialog will be displayed after you pressed a constraint toolbar button:
For certain constraints it allows you to modify the constraint direction. With the button you can check beforehand if this new constraint can be solved by A2plus. If not, have a look at section Troubleshooting.
A2plus provides the following constraints:
Point on Point
Select either a vertex (point), circle or sphere on each part. If a circle or sphere was selected, its center point will be used for the constraint. The toolbar button adds the constraint pointIdentity that make the vertices coincident.
Point on Line
Select a vertex (point), or circular edge (will select its center point), or a spherical face (will also select its center point) on one part and an edge on the other part. The toolbar button adds the constraint pointOnLine. It will put the vertex on the edge.
Point on Plane
Select a vertex (point), or circular edge (will select its center point), or a spherical face (will also select its center point) on one part and a plane on the other part. The toolbar button adds the constraint pointOnPlane. The constraint dialog allows you to specify an offset between the point and the plane. This offset can also be flipped between both sides of the plane. If the offset is zero, the constraint will put the vertex on the plane.
Sphere on Sphere
Select either a spherical face or a vertex (point) on both parts. The toolbar button adds the constraint sphereCenterIdent. It will either make the center of the spheres, the center of the sphere and the vertex, or the vertices coincident.
Circular Edge on Circular Edge
Select a circular edge on both parts. The toolbar button adds the constraint circularEdge. The constraint dialog allows you to specify an offset between the edges. This offset can also be flipped. You can furthermore set the constraint direction and lock the rotation of the parts. If the offset is zero, the constraint will put the edges concentric in the same plane.
Select either a cylindrical face or a linear edge on both parts. The toolbar button adds the constraint axisCoincident. The constraint dialog allows you to specify the axis direction. The dialog allows you furthermore to lock the rotation of the parts. The constraint will make the axes or lines coincident.
Select either a cylindrical face or a linear edge on both parts. The toolbar button adds the constraint axisParallel. The constraint dialog allows you to specify the axis direction. The constraint will make the axes or lines parallel.
Axis on Plane parallel
Select either a cylindrical face or a linear edge on one part and a plane on the other part. The toolbar button adds the constraint axisPlaneParallel. The constraint will make the axis or line parallel to the plane.
Axis on Plane normal
Select either a cylindrical face or a linear edge on one part and a plane on the other part. The toolbar button adds the constraint axisPlaneNormal. The constraint will make the axis or line normal to the plane.
Axis on Plane angle
Select either a cylindrical face or a linear edge on one part and a plane on the other part. The toolbar button adds the constraint axisPlaneAngle. The constraint will at first make the axis parallel to the plane. Then you can adjust the angle for the axis in the appearing constraint settings dialog.
Select a plane on both parts. The toolbar button adds the constraint planesParallel. The constraint dialog allows you to specify the constraint direction. The constraint will make the planes parallel.
Plane on Plane
Select a plane on both parts. The toolbar button adds the constraint planeCoincident. The constraint dialog allows you to specify a constraint direction and an offset between the planes. This offset can also be flipped. If the offset is zero, the constraint will make the planes coincident.
Select a plane on both parts. The toolbar button adds the constraint angledPlanes. The constraint dialog allows you to specify an angle between the planes. The constraint will make the planes at first parallel and the set the specified angle.
Coincidence at Center of Mass
Select either a closed edge or a plane on both parts. The toolbar button adds the constraint centerOfMass. The constraint dialog allows you to specify an offset between the edges or planes. This offset can also be flipped. You can furthermore set the constraint direction and lock the rotation of the parts. If the offset is zero, the constraint will put the edges or planes into the same plane.
An assembly can contain other assemblies. They are added like parts by pressing the toolbar button and selecting a *.FCStd file containing an assembly. Such subassemblies can also be edited like parts using the toolbar button . Please make sure for higher assembly stages that you update the assembly via the toolbar button when there were changes.
Possible constraints for a selection are displayed in the toolbar and the Constraint Tools dialog by enabling the corresponding buttons. The Constraint Tools dialog is opened via the toolbar button . It is intended to stay open to be able to add quickly several constraints to the assembly.
Constraints can be temporarily suppressed by selecting them in the model tree and changing the tree element property DataSuppressed.
To create part lists of assemblies, the different parts of the assembly must get part info that can be read by A2plus. This is done by editing the part using the toolbar button . In the opened part press the toolbar button and a spreadsheet with the name #PARTINFO# is created.
The structure of the spreadsheet is like this:
Fill out the grey fields with info you have and want to have in the final parts list.
In the assembly or subassembly use the toolbar button . It will ask you if you want to iterate recursively over all subassemblies. Click on Yes. This creates a new spreadsheet with the name #PARTSLIST#. It contains the info from the different #PARTSINFO# spreadsheets of the parts in a list like this:
The position (POS) is automatically set according to the appearance of the parts in the model tree. The top level part will get POS 1.
The quantity (QTY) is automatically calculated from the assembly. If a parts is twice in the assembly it will get QTY 2.
For subassemblies you can also create an info spreadsheet using the toolbar button . When you create or update the parts list of the main assembly this info will be used if you click on No for the question if you want to iterate recursively over all subassemblies. Then the different parts are not in the parts list but only the subassemblies.
Degrees of Freedom
The button labels every part of the assembly with its degrees of freedom. Furthermore it outputs a list with all parts and their dependencies. The list is output into FreeCAD's widget Report view. If this widget is currently not visible, it can either be shown by right-clicking into an empty part of the FreeCAD toolbar area and then choosing it in the appearing context menu or with the menu View → Panels → Report view.
The degrees of freedom labels can be removed by clicking the button again.
Shape of whole Assembly
Sometimes it is necessary to have the whole assembly combined as one shape. This shape can then for example be used for 3D printing in the Mesh workbench or for drawings in the TechDraw workbench. It is created using the toolbar button . The shape is by default not made visible. Use the same toolbar button to update the shape in case of changes in the assembly.
The a2plus preferences can be accessed via FreeCAD's menu Edit → Preferences and there in the section A2plus. You can set the following options:
Default solving method
- Use solving of partial systems
The solver begins with a part that has the property Datafixed Position set to true and a part constrained to it. All other parts are not calculated. If a solution could be found, the next constrained part is added to the calculation and so on.
- Use "magnetic" solver, solving all parts at once
The solver tries to move all parts at once in direction to a part that has the property Datafixed Position set to true. Note that this will in most cases take more time for the calculation of a solution.
- Force fixed position
This sets the property Datafixed Position to true for all parts in the assembly. Then no calculation is actually performed since all parts will always be fixed to the positions where they were created.
Default solver behaviour
- Solve automatically if a constraint property is changed
The solver will automatically be started. The same as turning on the toolbar button .
Behaviour when updating imported parts
- Recalculate imported parts before updating them
All parts of the assembly, including subassemblies, will be opened in FreeCAD to be reconstructed using values from spreadsheets.
This feature is designed to construct fully parametrically. Note: This feature is very experimental and not recommended for important projects.
- The assembly can be destroyed because of wrong references to topological names in parts
- Master spreadsheets can get broken when they are edited while a referenced part file is already closed. This can crash FreeCAD.
- Enable recursive update of imported parts
Opens all subassemblies recursively to update them.
- Use experimental topological naming
While importing parts to the assembly an algorithm generates topological names for each subelement of the imported shape. The topological names are written into the Datamux Info. When an imported part needs to be updated, these topological names are used to update the subelements of the constraints. So assemblies get more robust against volatile subelement numbers of FreeCAD.
Note: This increases file sizes and calculation time during import of parts. If topological naming should be used it has to be activated before the assembly is created.
- Inherit per face transparency from parts and subassemblies
Use colour and transparency settings from imported parts.
Note: This feature is very experimental and not recommended for important projects.
- Do not import invisible shapes
This will hide invisible datum/construction shapes. Note: No constraints must be connected to datum/construction shapes in higher or other subassemblies. Otherwise you can break the assembly.
- Use solid union for importing parts and subassemblies
All imported parts will directly be put together as union.
This feature is useful for FEM simulations or 3D-printing if only one solid is allowed. The alternative is to create a shape of the whole assembly later on.
User interface settings
- Show constraints in toolbar
If this option is not used, the toolbar buttons for the different constraints are not visible to save space in the toolbar. New constraints can still be set using the Constraint Tools dialog (toolbar button ).
- Use native file manager of your OS
If this option is used, you get the file dialog of your OS when selecting files for assemblies.
Storage of files
- Use relative paths for imported parts
Uses relative file paths to the part files.
- Use absolute paths for imported parts
Uses absolute file paths to the part files.
- All files are in this project folder:
All project files have to be in the specified folder. It doesn't matter if they are in subfolders of this folder. Note: No file is allowed to exist several times in the folder (e.g. in different subfolders).
This option is helpful to work on different machines because then one only has to copy the project folder.
Sooner or later you will get the problem that A2plus cannot solve the constraints you set. To overcome this, there are different strategies:
Checking Constraint Direction
Sometimes constraints seem to be consistently defined but they can nevertheless not be solved. An example: Assume you have a planesParallel constraint set for two planes. Now you want to set for the same planes the planeCoincident constraint and A2plus cannot solve this. Then the constraint directions of planesParallel and planeCoincident are different. Use the same direction for both constraints to fix this.
Most cases of unsolvable constraints occur directly when adding a new constraint. The solution is then to delete the constraint you added last. A2plus will propose this, too.
Sometimes the deletion strategy is the only one, for example when you edited a part in FreeCAD so that faces or edges connected to constraints are missing. You should then delete one constraint that is connected to the changed part at a time. Use the toolbar button after every deletion to see if you reached a solvable state.
When you got an assembly that can be solved, add step by step the constraints you need.
In some cases the solver only needs better start values to solve the constraints. Take for example the case that you have an axle part and a wheel part. You add a axisCoincident constraint and get no info that the solver failed but the parts are not moved accordingly and in the Report view widget of FreeCAD you see "REACHED POS-ACCURACY :0.0". A solution for this is to move the parts closer to that position you like to get by the constraint.
Note: Assure that at least one part of the constraint has the property Datafixed Position set to false.
Setting the Tip Property
If you miss some features of your part after the import to an A2plus assembly, check the property DataTip.
A2plus imports bodies of parts with all their features up to the tip feature. This is sensible because setting the tip to a certain feature means that all features behind the tip should not appear in the final part. So if you miss a part feature in A2plus, open the part via the toolbar button , then select a body and look at its property DataTip. If the tip is not at the feature where you want it, right-click on the feature where the tip should be and choose Set tip. Finally save the part and reload the assembly using the toolbar button .
Repairing Assembly Tree
Migrating old A2plus assemblies
Assemblies created with A2plus older than March 2019 do not show the correct icons for imported parts and have obsolete properties. These assemblies can be migrated to A2plus version 0.4.35 and newer using the menu Migrate proxies of imported parts. After doing this, you must save and reopen your assembly file.
Avoiding Accented Characters
This strategy is not necessary for Windows.
On some operating systems you can get problems if the file names or the file paths of parts or the assembly contain accented characters. Therefore avoid such characters and also special characters in general.
This strategy is no longer necessary for assemblies created with A2plus 0.3.11 or newer because A2plus issues now a warning for missing fixed positions.
When you set a constraint between two parts and no part has the property Datafixed Position set to true or is connected by a constraint to a part with Datafixed Position set to true, the constraint cannot be solved. The same happens if both parts of the constraint have Datafixed Position set to true.
Then A2plus outputs the info about the failed solution, but sometimes you only see that the parts are not moved accordingly and in the Report view widget of FreeCAD you see "REACHED POS-ACCURACY :0.0". This means the solver finished without errors but it could actually not solve the constraints.
Therefore check that at least one of your parts in the assembly has Datafixed Position set to true. Then assure that you only set constraints to a part which is somehow connected to the fixed part. To visualise these dependencies, see section Assembly Structure.
This strategy is no longer necessary for assemblies created with A2plus 0.4.0 or newer because A2plus rotates the parts now automatically a bit in the background to get a sufficient start angle for the solver.
The solver often fails for the constraint angledPlanes if the two selected planes have currently an angle of 0° or 180°. (The parts are not moved accordingly and in the Report view widget of FreeCAD you see "REACHED POS-ACCURACY :0.0".) A solution for this is to rotate one part by a few degrees using FreeCAD's transform feature (right-click on the part in the model tree and select in the context menu Transform).
Note: Assure that at least one part of the constraint has the property Datafixed Position set to false.
A2plus offers animations via dragging and via Python scripts.
Dragging animations are interactive since you trigger it by dragging a part of the assembly. To get these kind of animations:
- Fully constrain the part whose movement or rotation should be animated
- Click on the toolbar button . This enables the dragging mode.
- Click on the desired part in the assembly.
- Now you can move the mouse and the part will follow the movement of the mouse within the defined constraints.
- To end the dragging mode, left click in the assembly or press ESC.
Here is an example assembly to try out the dragging animation: A2p_example-for-dragging-animation.FCStd
This is the dragging animation using the example assembly:
Despite the dragging mode offers nice interactive animations, they are sometimes not precise enough for screencasts or videos. Scripted animations have the advantage that they animate movements and rotations in a defined way. You can for example rotate a part by exactly 10° back and forth. The following examples use an assembly where a part should be rotated. If you try to animate this using the dragging mode, you will see how hard it is to get a back and forth rotation that you can e.g. show your boss in a presentation. With the interactive example script, however, this is an easy task.
A scripted animation works usually this way:
- The assembly is fully constrained
- The script changes a parameter, for example the position or rotation angle of a part
- After the parameter change, the assembly constraints are solved
- Step 2. and 3. are repeated to get the animation
It is also possible to change instead of a placement parameter a constraint, for example the distance between 2 planes.
Simple Script Example
The simplest way to script an animation is a non-interactive animation that follows a defined movement. Here is an example: First download this assembly file: A2p_animated-example.FCStd and also this Python script: A2p_animation-example-script.py.
This is the content of the script and the lines beginning with a '#' describe what the different script lines do:
# import libraries import time, math, PySide import A2plus.a2p_solversystem as a2p_solver # we use steps of 1 degree step = 1 # wait 1 ms between every step timeout = 0.001 # initial angle is 0 degree angle = 0 # we take the currently opened document document = FreeCAD.activeDocument() # we want later change the rotation angle of the part "star_wheel_001" starWheel = document.getObject("star_wheel_001") # define a progress dialog running from 0 to 360 progressDialog = PySide.QtGui.QProgressDialog(u"Animation progress", u"Stop", 0, 360) # the while block is the main loop to change the angle and solve # the assembly constraints subsequently while angle < 360: # run this loop until we have one full turn (360 degrees) # increase the rotation angle angle += step # set the new angle to the progress dialog progressDialog.setValue(angle) # change the rotation angle of the part "star_wheel_001" starWheel.Placement.Rotation.Angle = math.radians(angle) # solve the constraints a2p_solver.solveConstraints(document, useTransaction=True) # update the view after the solving ('Gui' stands for 'graphical user interface') FreeCADGui.updateGui() # bring the progress dialog to front PySide.QtGui.QWidget.raise_(progressDialog) # if 'Stop' was pressed in the dialog, exit the loop if progressDialog.wasCanceled(): angle = 360 # wait some time before performing the next step time.sleep(timeout)
To use the script to perform the animation, we must
- Open the assembly file in FreeCAD.
- Open the script file in FreeCAD.
- Click on the toolbar button to execute the script (also called macro).
- Change to the tab of the assembly to see the rotation.
To practice, just change something in the script and execute it afterwards. For example increase step to 5.
This is the result of the example animation:
Interactive Script Example
The first script example demonstrated how to create an animation without any user feedback. For most applications you need to interact with the animation. For example the interesting issue in the example is to see how the driving pins cross the center groove of the wheel. To have a closer look you might present this detail to your colleagues or boss. Therefore you need an interactive solution.
This can be done by using a custom animation dialog with a slider. By moving the slider you can set the rotation angle and therefore rotate back and forth at interesting position.
This is the content of the script to get the interactive animation dialog:
# import libraries import time, math, PySide, sys import FreeCAD.A2plus.a2p_solversystem as a2p_solver from FreeCAD import Units from PySide import QtCore, QtGui # wait 1 ms after every calculation timeout = 0.001 # we take the currently opened document document = FreeCAD.activeDocument() # we want later change the rotation angle of the part "star_wheel_001" starWheel = document.getObject("star_wheel_001") class AnimationDlg(QtGui.QWidget): # the animation dialog def __init__(self): # to initialize the dialog super(AnimationDlg, self).__init__() self.initUI() def initUI(self): # the definition of the dialog components self.setMinimumSize(self.minimumSizeHint()) # set the minimal dialog size to minimum self.setWindowTitle('Animation Dialog') # use a grid layout for the whole form self.mainLayout = QtGui.QGridLayout() self.lineNo = 0 # first dialog grid line # add description label DescriptionLabel = QtGui.QLabel(self) DescriptionLabel.setText("Change slider to change rotation angle") self.mainLayout.addWidget(DescriptionLabel,self.lineNo,0,1,4) # next dialog grid line self.lineNo += 1 # add a label; there is no need for the "self." prefix because we don't want to change the label later LabelMin = QtGui.QLabel(self) LabelMin.setText("Min") LabelMin.setFixedHeight(32) self.mainLayout.addWidget(LabelMin,self.lineNo,0) # add a spin edit to define the slider minimum self.MinEdit = QtGui.QSpinBox(self) # get the angle unit as string self.MinEdit.setSuffix(" " + str(FreeCAD.Units.Quantity(1, FreeCAD.Units.Angle))[2:]) self.MinEdit.setMaximum(999) self.MinEdit.setMinimum(0) self.MinEdit.setSingleStep(10) self.MinEdit.setValue(0) self.MinEdit.setFixedHeight(32) self.MinEdit.setToolTip("Minimal angle for the slider") QtCore.QObject.connect(self.MinEdit, QtCore.SIGNAL("valueChanged(int)"), self.setMinEdit) self.mainLayout.addWidget(self.MinEdit,self.lineNo,1) # add the slider self.slider = QtGui.QSlider(QtCore.Qt.Horizontal, self) self.slider.setRange(0, 360) self.slider.setValue(0) self.slider.setFixedHeight(32) self.slider.setToolTip("Move the slider to change the rotation angle") QtCore.QObject.connect(self.slider, QtCore.SIGNAL("sliderMoved(int)"), self.handleSliderValue) self.mainLayout.addWidget(self.slider,self.lineNo,2) # add a label LabelMax = QtGui.QLabel(self) LabelMax.setText("Max") LabelMax.setFixedHeight(32) self.mainLayout.addWidget(LabelMax,self.lineNo,3) # add a spin edit to define the slider maximum self.MaxEdit = QtGui.QSpinBox(self) # get the angle unit as string self.MaxEdit.setSuffix(" " + str(FreeCAD.Units.Quantity(1, FreeCAD.Units.Angle))[2:]) self.MaxEdit.setMaximum(999) self.MaxEdit.setMinimum(1) self.MaxEdit.setSingleStep(10) self.MaxEdit.setValue(360) self.MaxEdit.setFixedHeight(32) self.MaxEdit.setToolTip("Maximal angle for the slider") QtCore.QObject.connect(self.MaxEdit, QtCore.SIGNAL("valueChanged(int)"), self.setMaxEdit) self.mainLayout.addWidget(self.MaxEdit,self.lineNo,4) # next dialog grid line self.lineNo += 1 # add a spacer self.mainLayout.addItem(QtGui.QSpacerItem(10,10), 0, 0) # add a label LabelCurrent = QtGui.QLabel(self) LabelCurrent.setText("Current angle:") LabelCurrent.setFixedHeight(32) self.mainLayout.addWidget(LabelCurrent,self.lineNo,1) # output the current angle self.CurrentAngle = QtGui.QLineEdit(self) self.CurrentAngle.setText(str(0)) self.CurrentAngle.setFixedHeight(32) self.CurrentAngle.setToolTip("Current rotation angle") self.CurrentAngle.isReadOnly() self.mainLayout.addWidget(self.CurrentAngle,self.lineNo,2) # add label for the unit LabelUnit = QtGui.QLabel(self) LabelUnit.setText("deg") LabelUnit.setFixedHeight(32) self.mainLayout.addWidget(LabelUnit,self.lineNo,3) # button to close the dialog self.Close = QtGui.QPushButton(self) self.Close.setText("Close") self.Close.setFixedHeight(32) self.Close.setToolTip("Closes the dialog") QtCore.QObject.connect(self.Close, QtCore.SIGNAL("clicked()"), self.CloseClicked) self.mainLayout.addWidget(self.Close,self.lineNo,4) # place the defined grid layout to the dialog self.setLayout(self.mainLayout) self.update() def handleSliderValue(self): # set slider value as angle starWheel.Placement.Rotation.Angle = math.radians(self.slider.value()) # output current angle self.CurrentAngle.setText(str(self.slider.value())) # solve the constraints a2p_solver.solveConstraints(document) # update the view after the solving ('Gui' stands for 'graphical user interface') FreeCADGui.updateGui() # wait some time, important to give time to perform calculations time.sleep(timeout) def setMinEdit(self): # assure that the minimum is samller than the maximum if self.MinEdit.value() >= self.MaxEdit.value(): self.MaxEdit.setValue(self.MinEdit.value() + 1) self.slider.setRange(self.MinEdit.value(), self.MaxEdit.value()) def setMaxEdit(self): # assure that the minimum is samller than the maximum if self.MinEdit.value() >= self.MaxEdit.value(): self.MinEdit.setValue(self.MaxEdit.value() - 1) self.slider.setRange(self.MinEdit.value(), self.MaxEdit.value()) def CloseClicked(self): AnimationDialog.close() # create and show the defined dialog AnimationDialog = AnimationDlg() AnimationDialog.show() # run this loop when the dialog is visible while AnimationDialog.isVisible(): # update the view; important to give the OS feedback the dialog is alive FreeCADGui.updateGui() # bring the dialog to front, so that the dialog is always visible QtGui.QWidget.raise_(AnimationDialog) # output slider value here too because during the calculation the slider might have been moved AnimationDialog.CurrentAngle.setText(str(AnimationDialog.slider.value()))
To understand the script syntax better, here is some command info:The command
starWheel.Placement.Rotation.Angle = math.radians(angle)means, we change the placement property Rotation.Angle of the part get got previously as "starWheel". This property gets the angle as radian. The function radians() from the library math converts the angle from degree to radian.
The property Rotation.Angle uses the current placement axis of the part (in our example the x-axis). To rotate the part e.g. around the z-axis one can set the rotation axis (before calling the rotation command) using the command
starWheel.Placement.Rotation.Axis = FreeCAD.Vector(0,0,1)Instead of rotating, parts can also be moved. To change for example the placement in y-direction of the wheel, the command would be
starWheel.Placement.Base.y = PositionShiftIn this case we would not define the variable angle but PositionShift that we change on every loop run.
There are different ways to set the placement of a part. Some are documented here. Unfortunately there is no list with all possible placement commands.
a2p_solver.solveConstraints(document, useTransaction=False/True)is a A2plus-specific command. It solves the assembly constraints of the assembly we previously got as "document". The option useTransaction specifies if FreeCAD should store every change in the undo/redo stack. For large animations you might therefore set it to False.