View Issue Details

IDProjectCategoryView StatusLast Update
0004051SketcherBugpublic2020-05-27 17:42
Reporterpaullee Assigned Toabdullah  
PriorityhighSeveritycrashReproducibilityalways
Status closedResolutionfixed 
PlatformLinuxOSFedora 29OS VersionFedora 29
Summary0004051: Hang FC and Linux edit a sketch with edge farrrrr from Origin
DescriptionFC Discussion Forum - Summary of Findings
FC Discussion Forum Thread

Repeating FC discussion:-
  1. Make a sketch by DraftToSketch an edge imported
  2. Try to edit the Sketch, FC hang, OS (Fedora 29) hang - harddisk led keep blinking and need to cold reboot os
  3. See the info at bottom of FC (screencapture posted in Forum), the edge vertex is somewhere at (8.355...e+08, ....), i.e. very very far from origin of the sketch.
  4. Repeat on a few available AppImage versions, summary posted below
  5. Seem problem start after git 16790
FreeCAD_0.19-16790-Linux-Conda_Py3Qt5_glibc2.12-x86_64.AppImage
on Fedora 29

- FC seem have no problem in opening the sketch objec
- No freeze of FC nor OS
17147
FreeCAD_0.19-17147-Linux....AppImage (just deleted so full name not available)
on Fedora 29

- Original test in 1st post of this thread
- FC freeze, OS freeze, Harddisk led kept blinking - for a numbers of minutes until I was not patient enough to cold reboot

FreeCAD_0.19-17175-Linux-Conda_Py3Qt5_glibc2.12-x86_64.AppImage
on Fedora 29

- FC freeze, OS freeze, Harddisk led kept blinking ...
- for about 5 min then the sketch is opened !
- then subsequent edit open the sketch has no problem !
Steps To ReproduceSteps shown above
Additional InformationOS: Fedora 29 (Workstation Edition) (GNOME/gnome)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit

Version: 0.19.16790 (Git)
Build type: Release
Branch: master
Hash: 15f440525e59c3caf89f847a490981abf5a45f8f
Python version: 3.7.1
Qt version: 5.6.2
Coin version: 4.0.0a
OCC version: 7.3.0

Version: 0.19.17147 (Git)
Build type: Release
Branch: master
Hash: 251a3b1ff5517d929b4993d8836e17e01ae2623c
Python version: 3.7.3
Qt version: 5.9.7
Coin version: 4.0.0a
OCC version: 7.3.0

Version: 0.19.17175 (Git)
Build type: Release
Branch: master
Hash: 507c40669d48ae4732268324cd0140c80cf68222
Python version: 3.7.3
Qt version: 5.9.7
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/HongKong (en_HK)
TagsNo tags attached.
FreeCAD Information

Activities

paullee

2019-07-06 07:46

developer  

abdullah

2020-05-27 17:42

manager   ~0014428

git commit 1efe9c920874571e37f94f1cee8c2e1af0ee4e7b

Issue History

Date Modified Username Field Change
2019-07-06 07:46 paullee New Issue
2019-07-06 07:46 paullee File Added: Test_ Sketch_ Edge at large distance from Origin.FCStd
2019-07-06 07:48 paullee Description Updated
2019-08-22 20:48 Kunda1 Status new => confirmed
2020-05-27 17:42 abdullah Assigned To => abdullah
2020-05-27 17:42 abdullah Status confirmed => closed
2020-05-27 17:42 abdullah Resolution open => fixed
2020-05-27 17:42 abdullah Fixed in Version => 0.19
2020-05-27 17:42 abdullah Note Added: 0014428