View Issue Details

IDProjectCategoryView StatusLast Update
0004011Path[FreeCAD] Bugpublic2019-06-10 14:40
Reporterfreman Assigned Tosliptonic  
PrioritynormalSeverityminorReproducibilityalways
Status closedResolutionno change required 
Product Version[FreeCAD] 0.19 
Target VersionFixed in Version[FreeCAD] 0.19 
Summary0004011: no pocket path is diam=tool diam
Descriptionhttps://forum.freecadweb.org/viewtopic.php?f=15&t=36891

making an edge pocket path on a circle with a tool equal to that of the circle fails to produce a path.

eg 6mm end mill:
3mm rad hole: no path
3.001mm : no path
3.01 : path with very small arc cut.
Steps To Reproducemake sketch with 3mm rad hole
pad
create edge pocket path using 6mm tool

result : no path to hole, no hole.

Increase hole size until path tool works.
Additional InformationOS: Linux (LXDE/LXDE)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.16854 (Git)
Build type: Release
Branch: master
Hash: fe0fd5512ba9a8a9c729cdc47af35bbe965050ac
Python version: 2.7.15
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedKingdom (en_GB)
TagsNo tags attached.
FreeCAD Information

Activities

sliptonic

2019-06-10 14:40

developer   ~0013171

This is normal behavior. Profiling as an operation follows the wall with the cutter. If the hole has the same diameter as the cutter, there's no horizontal distance to follow, it's purely a vertical move which should be done with a drilling operation.

Issue History

Date Modified Username Field Change
2019-06-07 14:58 freman New Issue
2019-06-10 14:40 sliptonic Assigned To => sliptonic
2019-06-10 14:40 sliptonic Status new => closed
2019-06-10 14:40 sliptonic Resolution open => no change required
2019-06-10 14:40 sliptonic Fixed in Version => 0.19
2019-06-10 14:40 sliptonic Note Added: 0013171