View Issue Details

IDProjectCategoryView StatusLast Update
0003842SketcherBugpublic2019-08-23 02:51
ReporteruwestoehrAssigned Toabdullah 
PrioritynormalSeverityminorReproducibilityalways
Status confirmedResolutionopen 
Product Version0.18 
Target Version0.19Fixed in Version 
Summary0003842: undo of move operation results in new state
Description- input a hexagon to a sketch via the corresponding toolbar button
- select a line of the hexagon at the right side (not the complete hexagon)
- use the new move toolbar button
- set the movement vector to the left (so that it crosses the hexagon)

Now you see that you made a mistake because e.g. you wanted to move the whole hexagon, therefore

- press undo

result: you will need 2 undo steps and the result is not the same as before the movement action.
Additional Informationforum thread: https://forum.freecadweb.org/viewtopic.php?f=3&t=34253&start=10#p287301
TagsNo tags attached.

Activities

Kunda1

2019-08-23 02:48

administrator   ~0013459

Set 0.19 target

Issue History

Date Modified Username Field Change
2019-02-16 18:38 uwestoehr New Issue
2019-02-16 20:59 wmayer Assigned To => abdullah
2019-02-16 20:59 wmayer Status new => confirmed
2019-08-23 02:48 Kunda1 Fixed in Version => 0.19
2019-08-23 02:48 Kunda1 Note Added: 0013459
2019-08-23 02:51 Kunda1 Fixed in Version 0.19 =>
2019-08-23 02:51 Kunda1 Target Version => 0.19