View Issue Details

IDProjectCategoryView StatusLast Update
0003788Part[FreeCAD] Bugpublic2019-01-25 01:50
Reporterfreecad-heini-1Assigned Towmayer 
PriorityhighSeveritymajorReproducibilityalways
Status closedResolutionfixed 
Product Version[FreeCAD] 0.18 
Target Version[FreeCAD] 0.18Fixed in Version[FreeCAD] 0.18 
Summary0003788: Part-workbench extrude with taper angle delivers a wrong shape in xz and yz direction, in xy it work like expected
DescriptionIf you extrude a sketch with a taper angle in xy plane, it works fine.
But if you extrude in xz and yz direction, it's wrong.
Steps To ReproduceCreate a circle on xz or yz plane.
Extrude it with an taper angle.
Then you will see the wrong behavoir.
Additional Informationhttps://forum.freecadweb.org/viewtopic.php?p=281848#p281848
TagsPart extrude

Issue History

Date Modified Username Field Change
2019-01-23 14:40 freecad-heini-1 New Issue
2019-01-23 14:40 freecad-heini-1 Tag Attached: Part extrude
2019-01-23 14:40 freecad-heini-1 File Added: part-wb_extrude_taper-angle.FCStd
2019-01-23 21:48 wmayer Status new => confirmed
2019-01-23 21:48 wmayer Project Sketcher => Part
2019-01-23 21:48 wmayer Category Bug => General
2019-01-23 21:50 wmayer Target Version => 0.18
2019-01-23 21:51 wmayer Category General => Bug
2019-01-25 01:50 wmayer Assigned To => wmayer
2019-01-25 01:50 wmayer Status confirmed => closed
2019-01-25 01:50 wmayer Resolution open => fixed
2019-01-25 01:50 wmayer Fixed in Version => 0.18
2019-01-25 01:50 wmayer Note Added: 0012505