View Issue Details

IDProjectCategoryView StatusLast Update
0003625FreeCAD[All Projects] Generalpublic2019-02-19 10:07
ReporterKunda1Assigned To 
PriorityhighSeveritymajorReproducibilityN/A
Status newResolutionopen 
Product Version0.18 
Target Version0.18Fixed in Version 
Summary0003625: Incomplete Wiki Pages to be completed before 0.18 release
DescriptionCurrently all the wiki pages that are tagged UnfinishedDocu
Forum thread: https://forum.freecadweb.org/viewtopic.php?f=8&t=31380
Additional Informationhttps://freecadweb.org/wiki/Arch_3Views
https://freecadweb.org/wiki/Arch_MakeIfcSpreadsheet
https://freecadweb.org/wiki/Arch_MergeWalls
https://freecadweb.org/wiki/BIM_ingame_tutorial
https://freecadweb.org/wiki/BIM_Workbench
https://freecadweb.org/wiki/Doxygen
https://freecadweb.org/wiki/Draft_Extension
https://freecadweb.org/wiki/Draft_Ortho
https://freecadweb.org/wiki/Draft_Perpendicular
https://freecadweb.org/wiki/FEM_ConstraintBearing
https://freecadweb.org/wiki/FEM_ConstraintBodyHeatSource
https://freecadweb.org/wiki/FEM_ConstraintElectrostaticPotential
https://freecadweb.org/wiki/FEM_ConstraintFlowVelocity
https://freecadweb.org/wiki/FEM_ConstraintFluidBoundary
https://freecadweb.org/wiki/FEM_ConstraintForce
https://freecadweb.org/wiki/FEM_ConstraintGear
https://freecadweb.org/wiki/FEM_ConstraintInitialFlowVelocity
https://freecadweb.org/wiki/FEM_ConstraintPulley
https://freecadweb.org/wiki/FEM_ConstraintTransform
https://freecadweb.org/wiki/FEM_CreateNodesSet
https://freecadweb.org/wiki/FEM_ElementGeometry1D
https://freecadweb.org/wiki/FEM_ElementGeometry2D
https://freecadweb.org/wiki/FEM_ElementRotation1D
https://freecadweb.org/wiki/FEM_EquationElasticity
https://freecadweb.org/wiki/FEM_EquationElectrostatic
https://freecadweb.org/wiki/FEM_EquationFlow
https://freecadweb.org/wiki/FEM_EquationFluxsolver
https://freecadweb.org/wiki/FEM_EquationHeat
https://freecadweb.org/wiki/FEM_MaterialFluid
https://freecadweb.org/wiki/FEM_MaterialMechanicalNonlinear
https://freecadweb.org/wiki/FEM_MeshBoundaryLayer
https://freecadweb.org/wiki/FEM_MeshClear
https://freecadweb.org/wiki/FEM_MeshGmshFromShape
https://freecadweb.org/wiki/FEM_MeshGroup
https://freecadweb.org/wiki/FEM_MeshNetgenFromShape
https://freecadweb.org/wiki/FEM_MeshPrintInfo
https://freecadweb.org/wiki/FEM_MeshRegion
https://freecadweb.org/wiki/FEM_PostApplyChanges
https://freecadweb.org/wiki/FEM_PostCreateClipFilter
https://freecadweb.org/wiki/FEM_PostCreateCutFilter
https://freecadweb.org/wiki/FEM_PostCreateDataAlongLineFilter
https://freecadweb.org/wiki/FEM_PostCreateDataAtPointFilter
https://freecadweb.org/wiki/FEM_PostCreateFunctions
https://freecadweb.org/wiki/FEM_PostCreateLinearizedStressesFilter
https://freecadweb.org/wiki/FEM_PostCreateScalarClipFilter
https://freecadweb.org/wiki/FEM_PostCreateWarpVectorFilter
https://freecadweb.org/wiki/FEM_PostPipelineFromResult
https://freecadweb.org/wiki/FEM_ResultShow
https://freecadweb.org/wiki/FEM_ResultsPurge
https://freecadweb.org/wiki/FEM_SolverCalculiX
https://freecadweb.org/wiki/FEM_SolverControl
https://freecadweb.org/wiki/FEM_SolverElmer
https://freecadweb.org/wiki/FEM_SolverRun
https://freecadweb.org/wiki/FEM_SolverZ88
https://freecadweb.org/wiki/InputField
https://freecadweb.org/wiki/Mesh_AddTriangle
https://freecadweb.org/wiki/Mesh_CreateMeshSegment
https://freecadweb.org/wiki/Mesh_CurvatureInfo
https://freecadweb.org/wiki/Mesh_EvaluateCurvature
https://freecadweb.org/wiki/Mesh_EvaluateSolid
https://freecadweb.org/wiki/Mesh_Evaluation
https://freecadweb.org/wiki/Mesh_FromGeometry
https://freecadweb.org/wiki/Mesh_PolyCut
https://freecadweb.org/wiki/Mesh_PolySegm
https://freecadweb.org/wiki/Mesh_PolySplit
https://freecadweb.org/wiki/Mesh_TrimMeshWithPlane
https://freecadweb.org/wiki/Mesh_VertexCurvature
https://freecadweb.org/wiki/OpenSCAD_ColorCodeShape
https://freecadweb.org/wiki/Part_Offset
https://freecadweb.org/wiki/PartDesign_NewSketch
https://freecadweb.org/wiki/Path_Area
https://freecadweb.org/wiki/Path_Area_Workplane
https://freecadweb.org/wiki/Path_Engrave
https://freecadweb.org/wiki/Path_MillFace
https://freecadweb.org/wiki/Path_Set_StartPoint
https://freecadweb.org/wiki/Path_ToolController
https://freecadweb.org/wiki/Plot_Axes
https://freecadweb.org/wiki/Plot_Grid
https://freecadweb.org/wiki/Plot_Labels
https://freecadweb.org/wiki/Plot_Legend
https://freecadweb.org/wiki/Plot_Positions
https://freecadweb.org/wiki/Plot_Series
https://freecadweb.org/wiki/Points_ExportPoints
https://freecadweb.org/wiki/Robot_SetDefaultOrientation
https://freecadweb.org/wiki/Ship_Area
https://freecadweb.org/wiki/Ship_Hydrostatics
https://freecadweb.org/wiki/Ship_Loading
https://freecadweb.org/wiki/Ship_PlotGZ
https://freecadweb.org/wiki/Ship_TankCapacity
https://freecadweb.org/wiki/Ship_TankNew
https://freecadweb.org/wiki/Ship_Weight
https://freecadweb.org/wiki/Simple_Box_Cover
https://freecadweb.org/wiki/Sketcher_CreateArcOfHyperbola
https://freecadweb.org/wiki/Sketcher_CreateArcOfParabola
https://freecadweb.org/wiki/Sketcher_CreateEllipseBy3Points
https://freecadweb.org/wiki/Start_Workbench
https://freecadweb.org/wiki/Std_CommandLine
https://freecadweb.org/wiki/Std_Cut
https://freecadweb.org/wiki/Std_DebugInto
https://freecadweb.org/wiki/Std_DebugMacro
https://freecadweb.org/wiki/Std_DebugOver
https://freecadweb.org/wiki/Std_DebugStop
https://freecadweb.org/wiki/Std_DebugToggle
https://freecadweb.org/wiki/Std_DlgMacroExecuteDirect
https://freecadweb.org/wiki/Std_FreezeViews
https://freecadweb.org/wiki/Std_OnlineHelpPython
https://freecadweb.org/wiki/Std_Print
https://freecadweb.org/wiki/Std_PrintPdf
https://freecadweb.org/wiki/Std_PrintPreview
https://freecadweb.org/wiki/Std_PythonWebsite
https://freecadweb.org/wiki/Std_Revert
https://freecadweb.org/wiki/Std_SceneInspector
https://freecadweb.org/wiki/Std_SetAppearance
https://freecadweb.org/wiki/Std_SetColors
https://freecadweb.org/wiki/Std_ToggleVisibilityAll
https://freecadweb.org/wiki/Std_ViewDockUndockFullscreen
https://freecadweb.org/wiki/Std_ViewIvIssueCamPos
https://freecadweb.org/wiki/Std_Workbench
https://freecadweb.org/wiki/Std_Workbench_Menu
https://freecadweb.org/wiki/Surface_CurveOnMesh
https://freecadweb.org/wiki/Surface_Filling
https://freecadweb.org/wiki/Surface_GeomFillSurface
https://freecadweb.org/wiki/Surface_Module

Missing pages that need to be created:
https://freecadweb.org/wiki/Part_Defeaturing
https://freecadweb.org/wiki/Sketcher_Move
https://freecadweb.org/wiki/Sketcher_DeleteAllGeometry
https://freecadweb.org/wiki/Sketcher_DeleteAllConstraints
https://freecadweb.org/wiki/Sketcher_SelectElementsWithDoFs
https://freecadweb.org/wiki/Sketcher_BSplineDegree
https://freecadweb.org/wiki/Sketcher_BSplinePolygon
https://freecadweb.org/wiki/Sketcher_BSplineComb
https://freecadweb.org/wiki/Sketcher_BSplineKnotMultiplicity
https://freecadweb.org/wiki/Sketcher_ConvertToNURB
https://freecadweb.org/wiki/Sketcher_BSplineIncreaseDegree
https://freecadweb.org/wiki/Sketcher_BSplineIncreaseKnotMultiplicity
https://freecadweb.org/wiki/Sketcher_BSplineDecreaseKnotMultiplicity
https://freecadweb.org/wiki/Sketcher_SwitchVirtualSpace
https://freecadweb.org/wiki/Surface_ExtendFace
TagsNo tags attached.

Relationships

parent of 0003054 new Sketcher Sketcher - List of important but empty wiki pages that need contents 
parent of 0002017 new FreeCAD List of important but empty wiki pages that need contents 
parent of 0003331 assignednormandc PartDesign PartDesign: update wiki pages to reference changes in 0.17 
parent of 0003641 new FreeCAD DAGview documentation needed 
Not all the children of this issue are yet resolved or closed.

Activities

normandc

2018-10-06 20:57

manager   ~0011949

Removing following links from report, because these commands do not exist in FreeCAD.

https://freecadweb.org/wiki/Constraint_Concentric
https://freecadweb.org/wiki/Constraint_ExternalAngle
https://freecadweb.org/wiki/Constraint_PointOnEnd
https://freecadweb.org/wiki/Constraint_PointOnMidPoint
https://freecadweb.org/wiki/Constraint_PointOnStart
https://freecadweb.org/wiki/Constraint_PointToObject
https://freecadweb.org/wiki/Constraint_TangentToEnd
https://freecadweb.org/wiki/Constraint_TangentToStart

normandc

2018-10-06 22:43

manager   ~0011950

Removed https://freecadweb.org/wiki/Drawing_Orthoviews
Page was mostly completed.

normandc

2018-10-06 22:51

manager   ~0011951

Deleted https://freecadweb.org/wiki/Sandbox:TestTranslation
This page created in 2013 didn't seem to have any further use.

https://freecadweb.org/wiki/Snadbox:Property_editor
was a useless redirect left after page rename.

Removed https://freecadweb.org/wiki/WikiPages
from list, it comes up because it lists available templates, including "UnfinishedDocu".

normandc

2018-10-07 07:30

manager   ~0011952

Deleted https://freecadweb.org/wiki/Sketcher_Arch3Point, it was a duplicate of https://freecadweb.org/wiki/Sketcher_Arc3Point

Renamed https://freecadweb.org/wiki/Sketcher_Conic_Sections to Sketcher CompCreateConic
and completed the page.

Added Sketcher_CreateArcOfHyperbola and Sketcher_CreateArcOfParabola.

normandc

2018-10-07 08:48

manager   ~0011953

Completed https://freecadweb.org/wiki/Std_Export

normandc

2018-10-07 09:17

manager   ~0011954

Completed https://freecadweb.org/wiki/Std_WhatsThis

normandc

2018-10-07 10:09

manager   ~0011955

Deleted https://freecadweb.org/wiki/Std_TipOfTheDay as the command no longer exists in the source code.

Renamed https://freecadweb.org/wiki/Std_RotateLeft to Std_ViewRotateLeft and completed page.

Renamed https://freecadweb.org/wiki/Std_RotateRight to Std_ViewRotateRight and completed page.

normandc

2018-10-07 17:25

manager   ~0011958

Completed:

https://freecadweb.org/wiki/Std_ViewCreate
https://freecadweb.org/wiki/Std_FreeCADWebsite
https://freecadweb.org/wiki/Std_OnlineHelp

normandc

2018-10-07 20:23

manager   ~0011959

Completed
https://freecadweb.org/wiki/Std_MeasureAngular
https://freecadweb.org/wiki/Std_MeasureLinear

normandc

2018-10-07 21:53

manager   ~0011961

https://freecadweb.org/wiki/Std_MeasureClearAll
https://freecadweb.org/wiki/Std_MeasureToggle3D
https://freecadweb.org/wiki/Std_MeasureToggleAll
https://freecadweb.org/wiki/Std_MeasureToggleDelta

renamed and completed:
https://freecadweb.org/wiki/Part_Measure_Clear_All
https://freecadweb.org/wiki/Part_Measure_Toggle_3d
https://freecadweb.org/wiki/Part_Measure_Toggle_All
https://freecadweb.org/wiki/Part_Measure_Toggle_Delta

normandc

2018-10-08 19:31

manager   ~0011978

Deleted these pages
https://freecadweb.org/wiki/Std_OnlineHelpWebsite (no longer in GUI)
https://freecadweb.org/wiki/Std_ViewExamples (does not exist)
https://freecadweb.org/wiki/Std_ViewXX (does not exist)
https://freecadweb.org/wiki/Std_ViewZoom (does not exist)

ulrich1a

2018-10-08 22:12

reporter   ~0011979

Why was https://freecadweb.org/wiki/Snadbox:Property_editor deleted? It was an attempt of mine to make a proposal for a new page for the property editor.

Kunda1

2018-10-09 00:02

administrator   ~0011981

Last edited: 2018-10-09 00:04

View 3 revisions

@ulrich1a it was renamed because it was created with a typo.
https://freecadweb.org/wiki/Sandbox:Property_editor
s/Snadbox/Sandbox/

normandc

2018-10-09 05:33

manager   ~0011983

Add missing pages

normandc

2018-10-09 05:56

manager   ~0011984

Last edited: 2018-10-09 06:10

View 2 revisions

Pages deleted, commands no longer exist (other will need to be renamed):
Actually this will require some thought, some of these tools were only removed in v0.18... Keeping them aside for now.
https://freecadweb.org/wiki/Mesh_Cut
https://freecadweb.org/wiki/Mesh_Demolding
https://freecadweb.org/wiki/Mesh_ExMakeMesh
https://freecadweb.org/wiki/Mesh_ExMakeTool
https://freecadweb.org/wiki/Mesh_ExMakeUnion
https://freecadweb.org/wiki/Mesh_MakeSegment
https://freecadweb.org/wiki/Mesh_SelectMesh
https://freecadweb.org/wiki/Mesh_SplitMesh
https://freecadweb.org/wiki/Mesh_ToolMesh
https://freecadweb.org/wiki/Mesh_Transform
https://freecadweb.org/wiki/Mesh_TrimMesh

harrygeier

2018-10-09 09:50

reporter   ~0011985

https://freecadweb.org/wiki/Sketcher_CreateEllipseBy3Points

done..

Just a note.. in the overview it´s named Ellipse by 3 Points.. FreeCad names the Tool Ellipse by peripasis, apoapsis, minor diamter .. I did not change the overview, but used the current naming inside .

harrygeier

2018-10-09 12:05

reporter   ~0011987

https://freecadweb.org/wiki/Sketcher_Move

done and ready for review..

Kunda1

2018-10-10 18:08

administrator   ~0011995

Last edited: 2018-10-10 18:28

View 3 revisions

@harrygeier heads up, looks like you are staying uniform to the style of the wiki documentation pages.

- Don't forget to add the <languages/> tag at the top of the page
- Don't forget to encapsulate the whole wiki page with <translate></translate> tag
- The headers you are using are smaller then the uniform pages (I think they should be H2 AKA '==Section=='

Edit: I may be wrong about using H2. Need NormandC's input

Kunda1

2018-10-12 12:04

administrator   ~0012009

@NormandC what's the correct header number is it ==Section== or ====Section==== ?

normandc

2018-10-13 22:25

manager   ~0012022

Normally I think it should be H2, or ==Section==. H4 are sub-sub-headers. If I recall correctly, the reason why we have so many old command pages with H4 headers is that, in the GuiCommand template, the TOC shows the H2 sections on the same level as the page name, which is listed as first item (I think it shouldn't, but here it is). Only with H4 headers are they nested on a sub-level to the page name.

Even if this is an annoyance, I'm now of the mind that H2 is better, it's more clearly defined with the default MediaWiki theme.

normandc

2018-10-13 22:44

manager   ~0012023

Last edited: 2018-10-13 22:47

View 3 revisions

@harrygeier I made a few small changes.

As per https://www.freecadweb.org/wiki/WikiPages#Graphics_content

We should avoid thumbnails, with legend inside the image: this forces us to translate the image code itself. IMO we should place images between ending and starting translate tags so they are taken out of the translation. This is not possible if the image is a thumb and contains a legend. Of course, this is only if the image does not contain sentences in English.

We should also avoid resizing images if the new size is very near the original size (500px vs. 523px) as the image becomes blurry.

When I edit a command page, I've taken the habit of placing the GuiCommand template on multiple lines. It is in fact a MediaWiki table. This is in no way obligatory, but I believe that this way, it will be easier to understand and to edit by wiki translators. A pipe | symbol indicates the start of a row.

So instead of
{{GuiCommand|Name=Sketcher CreateEllipse|Workbenches=[[Sketcher Workbench|Sketcher]], [[PartDesign 
Workbench|Part Design]]|MenuLocation=Sketch → Sketcher geometries → Create ellipse by periapsis, 
apoapsis, minor radius |SeeAlso=[[Sketcher_CreateEllipseByCenter|Sketcher Ellipse by center]], [[Sketcher 
Circle|Sketcher Circle]], [[Sketcher_CreateArcOfEllipse|Sketcher Arc of Ellipse]]}}
The translator will see
{{GuiCommand
|Name=Sketcher CreateEllipse
|Workbenches=[[Sketcher Workbench|Sketcher]]
|MenuLocation=Sketch → Sketcher geometries → Create ellipse by periapsis, apoapsis, minor radius 

|SeeAlso=[[Sketcher_CreateEllipseByCenter|Sketcher Ellipse by center]], [[Sketcher Circle|Sketcher Circle]], 
[[Sketcher_CreateArcOfEllipse|Sketcher Arc of Ellipse]]
}}

(There should not be a blank line between MenuLocation and SeeAlso - it does not appear in the Preview :-\ )

Also, Sketcher tools were removed from the PartDesign workbench in v0.17. I removed its mention in the GuiCommand's Workbenches field.

As for the ==Version== section found in many command pages: I wonder if we shouldn't add this as a field in the GuiCommand template itself. It would remove this section and make the page leaner...

harrygeier

2019-02-19 10:07

reporter   ~0012683

Done:

https://freecadweb.org/wiki/Sketcher_BSplineDegree
https://freecadweb.org/wiki/Sketcher_BSplinePolygon
https://freecadweb.org/wiki/Sketcher_BSplineComb
https://freecadweb.org/wiki/Sketcher_BSplineKnotMultiplicity
https://freecadweb.org/wiki/Sketcher_ConvertToNURB
https://freecadweb.org/wiki/Sketcher_BSplineIncreaseDegree
https://freecadweb.org/wiki/Sketcher_BSplineIncreaseKnotMultiplicity
https://freecadweb.org/wiki/Sketcher_BSplineDecreaseKnotMultiplicity
https://freecadweb.org/wiki/Sketcher_SwitchVirtualSpace

mostly done:
https://freecadweb.org/wiki/Part_Offset

Issue History

Date Modified Username Field Change
2018-10-06 00:33 Kunda1 New Issue
2018-10-06 00:36 Kunda1 Description Updated View Revisions
2018-10-06 20:57 normandc Additional Information Updated View Revisions
2018-10-06 20:57 normandc Note Added: 0011949
2018-10-06 22:43 normandc Additional Information Updated View Revisions
2018-10-06 22:43 normandc Note Added: 0011950
2018-10-06 22:51 normandc Additional Information Updated View Revisions
2018-10-06 22:51 normandc Note Added: 0011951
2018-10-07 07:30 normandc Additional Information Updated View Revisions
2018-10-07 07:30 normandc Note Added: 0011952
2018-10-07 08:48 normandc Additional Information Updated View Revisions
2018-10-07 08:48 normandc Note Added: 0011953
2018-10-07 09:17 normandc Additional Information Updated View Revisions
2018-10-07 09:17 normandc Note Added: 0011954
2018-10-07 10:09 normandc Additional Information Updated View Revisions
2018-10-07 10:09 normandc Note Added: 0011955
2018-10-07 17:25 normandc Additional Information Updated View Revisions
2018-10-07 17:25 normandc Note Added: 0011958
2018-10-07 20:23 normandc Additional Information Updated View Revisions
2018-10-07 20:23 normandc Note Added: 0011959
2018-10-07 21:53 normandc Additional Information Updated View Revisions
2018-10-07 21:53 normandc Note Added: 0011961
2018-10-08 19:31 normandc Additional Information Updated View Revisions
2018-10-08 19:31 normandc Note Added: 0011978
2018-10-08 22:12 ulrich1a Note Added: 0011979
2018-10-09 00:02 Kunda1 Note Added: 0011981
2018-10-09 00:04 Kunda1 Note Edited: 0011981 View Revisions
2018-10-09 00:04 Kunda1 Note Edited: 0011981 View Revisions
2018-10-09 05:33 normandc Additional Information Updated View Revisions
2018-10-09 05:33 normandc Note Added: 0011983
2018-10-09 05:34 normandc Additional Information Updated View Revisions
2018-10-09 05:56 normandc Additional Information Updated View Revisions
2018-10-09 05:56 normandc Note Added: 0011984
2018-10-09 06:10 normandc Note Edited: 0011984 View Revisions
2018-10-09 09:50 harrygeier Note Added: 0011985
2018-10-09 12:05 harrygeier Note Added: 0011987
2018-10-10 17:59 Kunda1 Relationship added parent of 0003054
2018-10-10 18:00 Kunda1 Relationship added parent of 0002017
2018-10-10 18:08 Kunda1 Note Added: 0011995
2018-10-10 18:24 Kunda1 Relationship added parent of 0003331
2018-10-10 18:28 Kunda1 Note Edited: 0011995 View Revisions
2018-10-10 18:28 Kunda1 Note Edited: 0011995 View Revisions
2018-10-12 12:01 Kunda1 Additional Information Updated View Revisions
2018-10-12 12:04 Kunda1 Note Added: 0012009
2018-10-13 22:25 normandc Note Added: 0012022
2018-10-13 22:44 normandc Note Added: 0012023
2018-10-13 22:46 normandc Note Edited: 0012023 View Revisions
2018-10-13 22:47 normandc Note Edited: 0012023 View Revisions
2018-10-17 20:13 Kunda1 Relationship added parent of 0003641
2019-01-17 05:32 normandc Additional Information Updated View Revisions
2019-02-19 10:07 harrygeier Note Added: 0012683