View Issue Details

IDProjectCategoryView StatusLast Update
0003480Path[FreeCAD] Bugpublic2018-05-24 07:10
ReportersliptonicAssigned To 
PrioritynormalSeveritymajorReproducibilityalways
Status newResolutionopen 
Product Version[FreeCAD] 0.18 
Target Version[FreeCAD] 0.18Fixed in Version 
Summary0003480: Lead in/out dressup produces poor paths on operations with multiple start points.
DescriptionAn operation like face profile can process both the external profile and the internal holes. The cutter must raise up, rapid to another position and descend again. In these cases, the paths produced are messy and usually not workable.
Steps To ReproduceModel a flat part with an internal hole larger than the desired tool.
Create a job, select the top face and create a 'profile based on faces' operation.
Tick the option to process holes.
Verify that a path is created.
Select the path and apply the lead in/out dressup.
TagsNo tags attached.

Activities

There are no notes attached to this issue.

Issue History

Date Modified Username Field Change
2018-05-16 21:28 sliptonic New Issue