View Issue Details

IDProjectCategoryView StatusLast Update
0003110SketcherFeaturepublic2018-11-29 11:14
Reporternormandc Assigned Toabdullah  
PrioritynormalSeverityminorReproducibilityN/A
Status assignedResolutionopen 
Product Version0.17 
Target Version0.19Fixed in Version 
Summary0003110: Sketcher: add support of relevant constraints to B-splines
DescriptionThe current implementation of B-splines only support constraints on the B-spline vertices. It would be useful to use other constraints as well (point on object, tangent, perpendicular on the curve).
Tagsb-splines, constraints
FreeCAD Information

Activities

JulianTodd

2018-11-29 11:14

reporter   ~0012229

Back-link to relevant forum topic https://forum.freecadweb.org/viewtopic.php?f=10&t=28896

Can this be broken down into two parts?

(1) BSpline is immutable and the other simpler geometry is forced to conform to it -- eg lines are forced equal length or forced perpendicular at point of intersection while the BSpline remains constant.

(2) BSpline can be fully effected and changed by the constraints.

I am looking to use the Length Equality between line and BSpline, which should be the easiest thing, it has to measure it and then apply it.

Issue History

Date Modified Username Field Change
2017-07-01 08:45 normandc New Issue
2017-07-01 08:45 normandc Status new => assigned
2017-07-01 08:45 normandc Assigned To => abdullah
2017-07-01 11:02 Kunda1 Tag Attached: bugtracker
2017-07-01 11:02 Kunda1 Tag Attached: constraints
2017-07-01 11:03 Kunda1 Tag Detached: bugtracker
2017-07-01 11:03 Kunda1 Tag Attached: b-splines
2018-10-06 15:11 abdullah Target Version => 0.19
2018-11-29 11:14 JulianTodd Note Added: 0012229