View Issue Details

IDProjectCategoryView StatusLast Update
0003099Path[FreeCAD] Featurepublic2019-01-23 00:51
ReporterKonstantinAssigned Tosliptonic 
PrioritynormalSeverityfeatureReproducibilityN/A
Status acknowledgedResolutionopen 
Product Version[FreeCAD] 0.18 
Target Version[FreeCAD] 0.19Fixed in Version 
Summary0003099: Tapping
DescriptionI want Tapping tool.
  1. I see an ability to add a tap in Tool Table, but there's no Pitch option.
  2. There's a few commaands for rigid tapping:
    1. Tapping cycle (mostly G84)
    2. Counter tapping cycle (on some machines G84 with M4, on my Fanuc G74, maybe others commands used to, not shure)
    3. Peck tapping (on some controllers only need to add Q depth to G84, on some used different command)
    4. Counter peck tapping (same as previous)

  3. On some controllers F is a pitch of a tap, on some it must be set as S*pitch. So, there must be an option for that in Postprocessor.
TagsNo tags attached.

Activities

Kunda1

2017-06-28 21:45

administrator   ~0009582

Changed to 'Feature'

Kunda1

2017-07-22 09:57

administrator   ~0009792

Related forum thread: https://forum.freecadweb.org/viewtopic.php?f=15&t=23127&start=10#p183405

sliptonic

2017-11-28 00:36

developer   ~0010482

feature moving to 0.18 version target

Kunda1

2019-01-23 00:51

administrator   ~0012498

bumped to 0.19

Issue History

Date Modified Username Field Change
2017-06-24 10:28 Konstantin New Issue
2017-06-28 21:45 Kunda1 Reproducibility have not tried => N/A
2017-06-28 21:45 Kunda1 Category Patch => Feature
2017-06-28 21:45 Kunda1 Note Added: 0009582
2017-06-28 21:45 Kunda1 Product Version => 0.17
2017-07-22 09:57 Kunda1 Note Added: 0009792
2017-11-28 00:36 sliptonic Product Version 0.17 => 0.18
2017-11-28 00:36 sliptonic Note Added: 0010482
2019-01-23 00:46 sliptonic Assigned To => sliptonic
2019-01-23 00:46 sliptonic Status new => acknowledged
2019-01-23 00:46 sliptonic Target Version => 0.19
2019-01-23 00:51 Kunda1 Note Added: 0012498