View Issue Details

IDProjectCategoryView StatusLast Update
0002939SketcherFeaturepublic2017-09-24 17:36
Reporterchrili_raketeAssigned To 
PrioritynormalSeverityfeatureReproducibilityhave not tried
Status closedResolutionfixed 
Product Version 
Target VersionFixed in Version0.17 
Summary0002939: Sketcher / constrain the length of a line to the length of an arc
DescriptionIt would be extremely helpful for me to constrain the length of a line to the length of an arc in the sketcher. So I could generate (rather trivial) sheet metal unroll jobs in the sketcher.

I have seen this feature implemented in SolveSpace.

I also suggested this in the FreeCAD forum: http://forum.freecadweb.org/viewtopic.php?f=19&t=20240&p=156078#p156078
Tagsconstraints, sketcher

Activities

chrili_rakete

2017-03-02 20:49

reporter   ~0008525

You actually can constrain the length of a line to the length of an arc in the same sketch via the expression: Sketch.Shape.Edge1.Length where Edge1 is the arc.

So concerning my personal usecase, I consider this feature request as already implemented in 0.17

Issue History

Date Modified Username Field Change
2017-03-02 16:32 chrili_rakete New Issue
2017-03-02 16:32 chrili_rakete Tag Attached: constraints
2017-03-02 16:32 chrili_rakete Tag Attached: sketcher
2017-03-02 17:55 Kunda1 Project FreeCAD => Sketcher
2017-03-02 20:49 chrili_rakete Note Added: 0008525
2017-09-24 17:36 wmayer Status new => closed
2017-09-24 17:36 wmayer Resolution open => fixed
2017-09-24 17:36 wmayer Fixed in Version => 0.17